Kerbl 2228 Infrared Heat Lamp: User Manual

1. Product Overview

The Kerbl 2228 Infrared Heat Lamp is designed to provide essential warmth for young animals such as piglets and chicks. This device ensures a consistent heat source, which is vital for their healthy development, particularly in colder environments. The lamp features a durable aluminum shade and is equipped with a 2.5-meter power cable. Its design includes 6 ventilation slots, which promote improved air circulation and contribute to extending the lifespan of the infrared bulb (bulb not included). A robust suspension chain, capable of supporting up to 20 kg, is provided for secure and stable installation.

2. Safety Instructions

WARNING: Fire Hazard! Observe all operating instructions carefully.

• Always ensure the heat lamp is securely mounted using the provided suspension chain.
• Maintain a minimum distance of 60 cm (approximately 24 inches) between the heat lamp and any flammable materials or animals when using bulbs up to 175W. Adjust distance for higher wattage bulbs as per bulb manufacturer's instructions.
• Do not cover the device. Ensure the ventilation slots remain unobstructed to prevent overheating.
• Use only infrared bulbs specifically designed for heat lamps. The maximum recommended wattage for this unit is 175W.
• Regularly inspect the power cable for any signs of damage. Do not use the lamp if the cable is damaged.
• Ensure the electrical outlet is appropriate for the lamp's power requirements (230V).
• Keep the lamp out of reach of animals to prevent accidental contact or damage.
• Disconnect from power before cleaning or replacing the bulb.

3. Package Contents

The Kerbl 2228 Infrared Heat Lamp package includes the following components:

• 1x Kerbl 2228 Infrared Heat Lamp (aluminum shade with electrical cable and protective cage)
• 1x Suspension Chain (maximum load capacity: 20 kg)
• 1x Hook for suspension
• 1x Red rubber ring for secure attachment

Please note: The infrared bulb is not included and must be purchased separately.

4. Setup

1. Unpack Components: Carefully remove all items from the packaging and ensure all listed components are present.
2. Install Bulb: Screw an appropriate infrared bulb (E27 base, max 175W) into the lamp socket. Ensure it is securely fastened but do not overtighten.
3. Attach Suspension Chain: Connect the suspension chain to the loop at the top of the lamp. Use the provided hook to hang the lamp from a sturdy fixture.
4. Adjust Height: Position the lamp at the desired height above the animals, ensuring the minimum safe distance (e.g., 60 cm for 175W bulbs) is maintained to prevent overheating or burns. The chain allows for height adjustment.
5. Secure Placement: Ensure the lamp is stable and cannot be easily dislodged by animals or external factors. The red rubber ring can be used to further secure the cable or chain if needed.
6. Connect to Power: Plug the power cable into a suitable 230V electrical outlet.

5. Operating Instructions

Once the Kerbl 2228 Infrared Heat Lamp is properly set up and a bulb is installed, operation is straightforward:

• Power On: Plug the lamp into a functioning electrical outlet. The lamp will immediately begin to emit heat.
• Monitor Temperature: Regularly check the temperature in the heated area to ensure it is appropriate for the animals. Adjust the lamp's height as necessary to achieve the desired temperature.
• Power Off: To turn off the lamp, simply unplug it from the electrical outlet.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your Kerbl 2228 Infrared Heat Lamp:

• Cleaning: Disconnect the lamp from power. Allow it to cool completely. Wipe the aluminum shade and protective cage with a dry or slightly damp cloth. Do not use abrasive cleaners or immerse the lamp in water.
• Bulb Replacement: Disconnect from power and allow the bulb to cool. Unscrew the old bulb and screw in a new E27 infrared bulb (max 175W).
• Cable and Chain Inspection: Periodically check the power cable for cuts, fraying, or other damage. Inspect the suspension chain and hook for wear or deformation. Replace any damaged components immediately.
• Ventilation Slots: Ensure the 6 ventilation slots at the top of the lamp are free from dust, debris, or obstructions to maintain proper airflow.

7. Troubleshooting

If you encounter issues with your Kerbl 2228 Infrared Heat Lamp, refer to the following common problems and solutions:

• Lamp Not Turning On:
  • Check if the lamp is securely plugged into a functioning electrical outlet.
  • Verify that the infrared bulb is correctly screwed in and not loose.
  • Test the bulb in another compatible fixture or replace it with a new one to check if the bulb is faulty.
  • Inspect the power cable for any visible damage.
• Insufficient Heat Output:
  • Ensure the correct wattage infrared bulb is installed (max 175W).
  • Lower the lamp closer to the animals, while strictly adhering to the minimum safe distance guidelines to prevent burns.
  • Check for drafts or cold air in the environment that might be dissipating heat.
• Lamp Overheating:
  • Ensure the ventilation slots are clear and unobstructed.
  • Verify that the bulb wattage does not exceed the maximum recommended 175W.
  • Ensure the lamp is not covered by any material.

8. Specifications

9. Warranty and Support

For information regarding warranty terms, product support, or spare parts, please contact Kerbl customer service directly. Details can typically be found on the manufacturer's official website or product packaging.

Manufacturer: Kerbl
Country of Origin: Germany