How can I disassemble the Kartell Bourgie Lamp to access the lamp holders if two of the three elements are not working?

Based on the Kartell Bourgie Lamp manual, the lamp is designed for straightforward assembly rather than deep internal disassembly. The three lamp holders are integrated into the Bourgie Table Lamp Base (B). While the manual does not provide specific steps for opening the sealed polycarbonate base, here are the relevant details for your electrician:External Access: The three E14 lamp holders are accessible from the top of the base once the lampshade (A) and the shade support elements (C) are removed.Wiring Check: Since the lamp features an integrated dimmer, the failure of two specific bulbs while one remains functional often points to a loose connection at the individual socket level or a fault within the internal parallel wiring from the dimmer to those specific holders.Disassembly Caution: The lamp is constructed from polycarbonate. There are no user-serviceable internal parts listed in the manual. If the electrician cannot see obvious screws, the base may be ultrasonically welded or snapped together with internal clips that are prone to breaking if forced.Next Steps: If the bulbs themselves have been tested and work in the one functional socket, and the electrician cannot find a way to non-destructively open the base, it is recommended to contact Kartell customer support for professional repair or to inquire about a replacement base unit, as the internal wiring is not intended to be user-accessible.

Kartell 9070/B4

Kartell Bourgie Table Lamp

User Manual

Introduction

Welcome to the user manual for your new Kartell Bourgie Table Lamp. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your lamp. Please read these instructions carefully before use and retain them for future reference.

Safety Information

Ensure the lamp is placed on a stable, flat surface.
Do not expose the lamp to excessive moisture or direct water.
Always disconnect the power supply before cleaning or replacing bulbs.
Use only the specified bulb type (E14) and wattage to avoid damage.
Keep out of reach of children and pets.

Product Overview

The Kartell Bourgie Table Lamp, designed by Ferruccio Laviani in 2004, is a distinctive lighting fixture crafted from transparent or mass-colored polycarbonate. It features a baroque-inspired base and a pleated lampshade, offering both aesthetic appeal and functional illumination with its integrated dimmer.

Components

Your Kartell Bourgie Table Lamp package includes the following main components:

1 x Bourgie Table Lamp Base (B)
1 x Bourgie Table Lamp Shade (A)
3 x E14 3.6W LED Bulbs
6 x Shade Support Elements (C)

Diagram of Kartell Bourgie lamp components: A - Shade, B - Base, C - Shade Support Elements

Figure 1: Exploded view of Kartell Bourgie Table Lamp components.

Features

Design: Ferruccio Laviani, 2004
Material: Transparent or mass-colored polycarbonate
Dimensions: 37 cm (base) x 68-78 cm (height)
Electrical Rating: IP20; 220 - 240 V
Bulb Type: E14 2700 K (3 bulbs included)
Dimmer: Integrated dimmer for adjustable light intensity
Adjustable Height: The lampshade can be adjusted to three different heights (68 cm, 73 cm, 78 cm) by varying the number of shade support elements used.

Kartell Bourgie Table Lamp in clear crystal finish, front view.

Figure 2: Kartell Bourgie Table Lamp (Glasklar).

Setup

Assembly of your Bourgie lamp is straightforward. Follow these steps:

Carefully unpack all components from the packaging.
Place the lamp base (B) on a stable surface.
Determine your desired lamp height. The lamp can be assembled at three different heights (68 cm, 73 cm, 78 cm) by inserting 2, 4, or 6 of the shade support elements (C) into the designated slots on the top of the base.
Screw the three E14 LED bulbs into the lamp holders on the base.
Carefully place the lampshade (A) onto the top of the shade support elements, ensuring it sits securely.
Plug the lamp into a suitable 220-240V power outlet.

Side view of the Kartell Bourgie Table Lamp, highlighting its intricate base design.

Figure 3: Side profile of the assembled lamp, showing the base and shade.

Operation

The Kartell Bourgie Table Lamp is designed for ease of use with an integrated dimmer function.

Turning On/Off: Locate the inline switch on the power cord. Toggle the switch to turn the lamp on or off.
Dimming Function: The lamp is equipped with a dimmer. Rotate the dimmer knob (usually located on the inline switch or base) clockwise to increase brightness and counter-clockwise to decrease brightness. Adjust to your preferred light intensity.

Maintenance

To ensure the longevity and appearance of your Kartell Bourgie Table Lamp, follow these simple maintenance guidelines:

Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the polycarbonate surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
Bulb Replacement: If a bulb needs replacing, ensure the lamp is unplugged and the bulbs have cooled down. Unscrew the old bulb and screw in a new E14 bulb of the correct wattage (max 28W incandescent equivalent, or the provided 3.6W LED bulbs).

Troubleshooting

If you encounter any issues with your Kartell Bourgie Table Lamp, please refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
Lamp does not turn on.	No power, loose connection, faulty bulb, or faulty dimmer/switch.	Check if the lamp is properly plugged into a working outlet. Ensure the inline switch is in the 'On' position. Check if bulbs are screwed in tightly and are not burnt out. If issues persist, the dimmer or switch may need professional inspection or replacement.
Light flickers or is inconsistent.	Loose bulb, incompatible bulb, or faulty dimmer.	Ensure bulbs are screwed in firmly. Verify that the bulbs are compatible with dimmers. If flickering continues, the dimmer unit may be faulty and require replacement.
Lamp shade is wobbly.	Shade not properly seated or missing support elements.	Ensure the lampshade is correctly placed on the support elements. Verify that the correct number of support elements (2, 4, or 6) are securely inserted into the base for your desired height.

If you are unable to resolve the issue using these steps, please contact Kartell customer support or a qualified electrician.

Specifications

Attribute	Detail
Model Number	9070/B4
Color	Glasklar (Clear Crystal)
Product Dimensions	37 x 37 x 78 cm (Base x Base x Max Height)
Item Weight	3.4 Kilograms (7.5 Pounds)
Material	Polycarbonate 2.0 (from renewable raw materials)
Installation Type	Tabletop
Lamp Base	E14
Bulbs Included	3 x E14 3.6W LED
Dimmable	Yes
Made In	Italy

Warranty & Support

For detailed warranty information, please refer to the 'General Terms and Conditions' section on the Kartell official website or the retailer's help page where the product was purchased. Kartell products are known for their quality and durability.

For further assistance or inquiries, please contact Kartell customer service through their official channels. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.