Introduction
This manual provides essential information for the safe and efficient use of your Artemide Tizio Classic Desk Lamp. Please read these instructions thoroughly before installation and operation, and retain them for future reference.
The Artemide Tizio Classic Task Lamp, designed by Richard Sapper in 1972, is recognized for its adjustable design and quality construction. It is a modern design classic, featured in prominent museum collections.
Safety Instructions
- Ensure the lamp is connected to a 110 Volt power supply, suitable for USA and Canadian markets.
- Do not exceed the maximum compatible wattage of 50 watts for the halogen bulb.
- The lamp head can become very hot during prolonged use. Avoid direct contact with the lamp head when in operation or immediately after turning off.
- Always disconnect the power before cleaning or performing any maintenance.
- This product is designed for indoor use only. Do not expose to moisture or use in wet locations.
- Keep away from flammable materials.
- If any part of the lamp is damaged, discontinue use and contact customer support.
Product Components
The Artemide Tizio Classic Desk Lamp consists of the following main components:
- Base: Provides stability and houses the transformer.
- Adjustable Arms: Counterbalanced arms for flexible positioning.
- Lamp Head: Contains the halogen bulb and reflector.
- Dimmer Switch: Integrated control for light intensity.
- Power Cord: For connecting to an electrical outlet.
Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Placement: Place the lamp base on a stable, flat surface, such as a desk or table. Ensure adequate space for the adjustable arms to move freely.
- Power Connection: Plug the power cord into a standard 110 Volt electrical outlet.
- Bulb Installation (if not pre-installed):
- Ensure the lamp is unplugged.
- Gently open the lamp head cover.
- Insert a compatible 50-watt (maximum) halogen bulb (A19 shape size) into the socket. Do not touch the bulb directly with bare hands; use a cloth or glove to avoid oil residue.
- Close the lamp head cover securely.
Operating Instructions
- Power On/Off: The lamp is controlled by a dimmer switch, typically located on the base or lower arm. Press the switch to turn the lamp on or off.
- Adjusting Brightness: Rotate or press and hold the dimmer switch (depending on model variation) to adjust the light intensity. The lamp offers variable brightness settings.
- Positioning the Lamp: The Tizio lamp features counterbalanced arms that allow for smooth and precise adjustment of the lamp head's position.
- Gently grasp the lamp head or the upper arm.
- Move the arms to achieve the desired height and angle for illumination. The lamp is designed to hold its position once adjusted.
- The lamp head can be rotated to direct light as needed for task lighting or indirect illumination.
Maintenance
- Cleaning:
- Always unplug the lamp before cleaning.
- Allow the lamp to cool completely if it has been in use.
- Wipe the metal and plastic surfaces with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by a dry cloth.
- Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Bulb Replacement:
- Ensure the lamp is unplugged and the bulb is cool.
- Open the lamp head cover.
- Carefully remove the old halogen bulb.
- Install a new 12V, 50-watt (maximum) halogen bulb (A19 shape size). Use a clean cloth or glove to handle the new bulb.
- Close the lamp head cover securely.
- Cable Inspection: Periodically inspect the power cord for any signs of damage, fraying, or wear. If damage is found, discontinue use and contact a qualified technician or Artemide customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers or is dim. |
|
|
| Lamp arms do not hold position. |
|
|
Specifications
- Model: A009048
- Brand: Artemide
- Type: Desk Lamp
- Style: Classic, Industrial
- Material: Alloy Steel, Aluminum, Plastic (shade)
- Finish: Chrome (metal components), Black (shade)
- Product Dimensions: 4.25"D x 6"W (Base Diameter: 4.25 Inches)
- Item Weight: 10.23 pounds
- Light Source: Halogen
- Bulb Type: A19 shape size, Max 50 Watts
- Voltage: 110 Volts
- Control Method: Touch (Dimmer Switch)
- Special Feature: Adjustable
- Indoor/Outdoor Usage: Indoor only
- Power Source: Corded Electric
Warranty Information
Artemide products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Artemide website. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, replacement parts, or any inquiries regarding your Artemide Tizio Classic Desk Lamp, please contact Artemide customer support.
- Manufacturer: Artemide
- Website: www.artemide.com (Please visit the official website for contact information specific to your region.)
