Kärcher 2.645-024.0

Kärcher CS90 Circular Sprinkler Instruction Manual

Model: 2.645-024.0

Introduction

This manual provides essential instructions for the safe and efficient use of your Kärcher CS90 Circular Sprinkler. Designed for watering small areas, this sprinkler offers 360-degree coverage and features a robust anchoring spike for stability on various terrains. Please read these instructions carefully before initial operation and retain them for future reference.

Package Contents

  • 1 x Kärcher CS90 Circular Sprinkler (Model 2.645-024.0)

Ensure all components are present and undamaged. If any parts are missing or damaged, contact Kärcher customer support.

Setup

  1. Connect Hose: Attach your garden hose to the sprinkler's inlet connection. The Kärcher CS90 is compatible with all standard click systems. Ensure a secure, leak-free connection.
  2. Position Sprinkler: Place the sprinkler in the desired watering area. The robust anchoring spike allows for stable placement on uneven or sloping ground. Push the spike firmly into the soil until the sprinkler base is stable.
Kärcher CS90 Circular Sprinkler with black spike and yellow spray head

Image 1: The Kärcher CS90 Circular Sprinkler, showing its black spike base and yellow spray head with a hose connection point.

Operating Instructions

  1. Activate Water Supply: Slowly turn on the water supply from your tap. The sprinkler will begin to spray water in a circular pattern.
  2. Adjust Coverage: The water pressure from your hose will determine the spray radius. Adjust the tap to increase or decrease the water flow, thereby controlling the watering circle's size. The sprinkler provides a 360-degree circular watering area.
  3. Watering Area: The Kärcher CS90 is designed to water areas up to 64 square meters (approximately 689 square feet).
  4. Deactivate: When watering is complete, turn off the water supply at the tap.
Kärcher CS90 Circular Sprinkler in operation, spraying water over a green lawn

Image 2: The Kärcher CS90 Circular Sprinkler actively spraying water in a wide, circular pattern across a green lawn, connected to a yellow garden hose.

Maintenance

  • Cleaning: Periodically check the sprinkler nozzle for any debris or mineral buildup that might obstruct the spray pattern. Clean with a soft brush and water if necessary.
  • Storage: Before storing for extended periods, especially during freezing temperatures, drain all water from the sprinkler and hose to prevent damage. Store in a dry, protected area.

Troubleshooting

ProblemPossible CauseSolution
Uneven or weak spray patternLow water pressure; clogged nozzle; kinked hose.Increase water pressure at the tap; clean the nozzle; straighten the hose.
Sprinkler does not rotate (if applicable) or spray in full circleInsufficient water pressure; internal obstruction.Ensure adequate water pressure; check for and remove any obstructions in the spray head.
Water leakage at hose connectionLoose connection; damaged washer.Tighten hose connection; replace washer if damaged.

Specifications

FeatureDetail
ModelCS90 Circular Sprinkler (2.645-024.0)
BrandKärcher
Watering AreaUp to 64 m² (689 sq ft)
Spray Pattern360-degree circular
MaterialPlastic
ColorBlack/Yellow
Dimensions (L x W x H)2.28 x 4.13 x 9.57 inches (5.8 x 10.5 x 24.3 cm)
Item Weight2.39 ounces
CompatibilityAll standard click systems

Warranty and Support

For warranty information or technical support, please refer to the official Kärcher website or contact Kärcher customer service directly. Keep your purchase receipt as proof of purchase.

Kärcher is a registered trademark.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.