Manhattan High Speed USB Active Cable 2.0 (Model 510424) Instruction Manual

Introduction

This manual provides instructions for the Manhattan High Speed USB Active Cable 2.0, Model 510424. This cable is designed to extend the reach of your USB 2.0 connection, allowing you to connect USB-B devices such as printers to your computer over longer distances without signal degradation.

The built-in repeater ensures that the Hi-Speed USB signal quality, electrical, and timing specifications are maintained over the entire length of the cable.

Product Features

• USB-A Male to USB-B Male connectors.
• Extends and boosts the signal for any USB device.
• Supports data transfer speeds up to 480 Mbps.
• Integrated repeater maintains Hi-Speed USB signal quality.
• Overcomes the standard 5-meter (16 ft.) USB distance limitation.
• Provides a single, non-daisy-chainable extension for a maximum distance of 11 meters (36 ft.).
• Plug and Play functionality; compatible with Windows and Mac operating systems.
• Bus-powered, requiring no external power supply.

Package Contents

• Manhattan High Speed USB Active Cable 2.0 (Model 510424)

Image: The Manhattan High Speed USB Active Cable 2.0, Model 510424, shown in its retail packaging. The packaging highlights "Premium Cable" and "Lifetime Guarantee".

Setup Instructions

1. Identify Connectors: Locate the USB-A male connector (flat, rectangular) and the USB-B male connector (square with two chamfered corners) on the active cable.

   

   Image: Close-up view of the USB-A male connector (left) and USB-B male connector (right) of the Manhattan active cable.

2. Connect to Computer: Insert the USB-A male connector of the active cable into an available USB-A port on your computer.

   

   Image: A detailed view of the USB-A male connector, ready for connection to a computer's USB port.

3. Connect to Device: Insert the USB-B male connector of the active cable into the USB-B port on your peripheral device (e.g., printer, scanner).

   

   Image: A detailed view of the USB-B male connector, designed for connection to a peripheral device like a printer.

4. Verify Connection: Ensure both ends of the cable are securely connected. The cable is bus-powered and does not require an external power supply.

   

   Image: The full length of the Manhattan High Speed USB Active Cable 2.0, showing the integrated repeater module in the middle of the cable, which boosts the signal over the extended length.

Operating Instructions

Once the Manhattan High Speed USB Active Cable 2.0 is connected, your computer should automatically detect the connected peripheral device. This cable supports Plug and Play functionality, meaning no additional drivers are typically required for the cable itself.

• Ensure your peripheral device (e.g., printer) is powered on.
• Install any necessary drivers for your specific peripheral device as instructed by its manufacturer.
• The cable will facilitate data transfer at USB 2.0 speeds (up to 480 Mbps) over the extended distance.

Maintenance

The Manhattan High Speed USB Active Cable 2.0 requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Storage: Store the cable in a cool, dry place when not in use. Avoid extreme temperatures.
• Handling: Do not bend or crimp the cable sharply, especially near the connectors or the repeater module, as this can damage internal wiring.
• Cleaning: If necessary, gently wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Connection: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself.

Troubleshooting

If you encounter issues with your Manhattan High Speed USB Active Cable 2.0, consider the following troubleshooting steps:

• Device Not Detected:
  • Ensure both ends of the cable are securely connected to the computer and the peripheral device.
  • Try connecting the peripheral device directly to the computer with a standard USB cable (if possible) to rule out issues with the device itself.
  • Connect the active cable to a different USB port on your computer.
  • Restart your computer and the peripheral device.
• Slow Data Transfer:
  • Verify that both your computer's USB port and the peripheral device support USB 2.0 speeds.
  • Ensure no other high-bandwidth USB devices are connected to the same USB hub or controller on your computer, which might share bandwidth.
• Intermittent Connection:
  • Check the cable for any visible damage, kinks, or frayed areas.
  • Ensure the repeater module is not obstructed or under excessive strain.
  • Avoid running the cable near sources of strong electromagnetic interference.

If problems persist, consult the support resources for your peripheral device or contact Manhattan customer support.

Specifications

Warranty and Support

Manhattan offers a Lifetime Guarantee on this product. For detailed warranty information, product registration, or technical support, please visit the official Manhattan website or contact their customer service department.

You can find more information and support resources by visiting the MANHATTAN Store on Amazon.