Bona Hardwood Floor Spray Mop Instruction Manual

Product Overview

The Bona Hardwood Floor Spray Mop is an all-in-one cleaning tool designed for effective and safe cleaning of hardwood and other sealed bare-floor surfaces. It combines Bona's premium, no-residue cleaner with a durable, high-quality microfiber mop.

Figure 1: The Bona Hardwood Floor Spray Mop, ready for use.

This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your Bona Hardwood Floor Spray Mop.

Setup

Minimal assembly is required to get your Bona Hardwood Floor Spray Mop ready for use. Follow the steps below or refer to the official assembly video for a visual guide.

Assembly Steps:

1. Unpack Components: Carefully open the box and remove all five pieces of the mop system.
2. Connect Handle to Lower Pole:
   • Align the guide on the lower pole with the channel on the upper handle.
   • Apply light force until you hear the pieces snap into place.
   • Slide the green collar up into the handle, aligning the channels to secure the connection.
3. Attach Mop Base:
   • Align the channel on the mop base with the bottom of the pole.
   • Rotate the base until the silver button snaps into place, securing the mop head.
4. Attach Microfiber Cleaning Pad:
   • Lay the Bona Microfiber Cleaning Pad on the floor with the blue side down.
   • Firmly place the mop base on top of the pad to secure it via the hook-and-loop fasteners.
5. Insert Refillable Cartridge:
   • Remove the cap from the refillable mop cartridge.
   • Place the cartridge into the mop by pushing down until it clicks into place.
6. Prime the System: Pull the trigger three to four times to fill the reservoir. Once full, the spray will dispense.

Operating Instructions

The Bona Hardwood Floor Spray Mop is designed for quick and easy cleaning of hardwood and other sealed bare-floor surfaces. Its ergonomic design and swiveling head allow for efficient maneuvering around furniture and tight spaces.

• Spray: To dispense the cleaning solution, simply pull the trigger located on the handle. The mop delivers a fine mist that is safe for wood floors and dries fast without leaving a dulling residue.
• Mop: Glide the mop across the floor to clean. The microfiber pad effectively picks up dirt, dust, and grime.
• Coverage: The 28.75-ounce non-toxic cleaner cartridge with Greenguard formula provides ample solution for cleaning large areas.

Maintenance

Proper maintenance ensures the longevity and effectiveness of your Bona Hardwood Floor Spray Mop.

Cleaning the Microfiber Pad:

• The microfiber cleaning pad is machine-washable.
• After use, detach the pad from the mop base.
• Wash the pad in your washing machine with similar colors. Avoid using fabric softeners, as they can reduce the pad's effectiveness.
• Air dry or tumble dry on low heat.
• Reattach the clean, dry pad to the mop base for future use.

Refilling the Cartridge:

• The cleaner cartridge is refillable.
• To refill, remove the cartridge from the mop.
• Unscrew the cap and fill with Bona Hardwood Floor Cleaner.
• Securely replace the cap and reinsert the cartridge into the mop until it clicks.

Troubleshooting

If you encounter issues with your Bona Hardwood Floor Spray Mop, refer to the following common troubleshooting tips:

Specifications

Warranty

The Bona Hardwood Floor Spray Mop comes with a One-year warranty from the manufacturer. Please retain your proof of purchase for warranty claims.

Support

For further assistance, product inquiries, or to access the official PDF manual, please visit the Bona website or contact their customer support.

Official PDF Manual: Download PDF