WMF Spice Mill De Luxe Grinding Mechanism

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your WMF Spice Mill De Luxe replacement grinding mechanism, model 60.6023.0690. This component is designed to restore the grinding performance of your existing WMF Spice Mill De Luxe.

Setup and Installation

The WMF Spice Mill De Luxe grinding mechanism is a replacement part intended for easy installation into your existing WMF spice mill body. Please follow these steps carefully:

1. Unpack the Grinding Mechanism: Carefully remove the new grinding cone and adjustment wheel from its packaging. Inspect for any visible damage.
2. Prepare Your Spice Mill: Ensure your existing WMF Spice Mill De Luxe is empty and clean. Remove any remaining spices and disassemble the old grinding mechanism according to your original mill's instructions.
3. Install the New Grinding Cone: Place the new grinding cone into the base of your spice mill. Ensure it sits securely and correctly.
4. Attach the Adjustment Wheel: Position the adjustment wheel onto the grinding cone. This wheel allows you to control the fineness of the grind.
5. Secure the Mechanism: Reassemble the remaining parts of your spice mill, ensuring the new grinding mechanism is firmly secured. Refer to your original mill's manual for specific reassembly steps if needed.

Image: The WMF Spice Mill De Luxe replacement grinding mechanism, including the grinding cone and adjustment wheel.

Operating Instructions

Once the new grinding mechanism is installed, your WMF Spice Mill De Luxe is ready for use.

1. Filling the Mill: Unscrew the top part of your spice mill and fill the reservoir with your desired whole spices (e.g., peppercorns, coarse salt). Do not overfill.
2. Adjusting Grind Fineness: The adjustment wheel on the grinding mechanism allows you to select your preferred grind size. Turn the wheel clockwise for a finer grind and counter-clockwise for a coarser grind. Test the grind on a small amount of spice to find your ideal setting.
3. Grinding Spices: Hold the mill firmly and turn the top section to activate the grinding mechanism. The freshly ground spices will dispense from the bottom.

Care and Maintenance

Proper care ensures the longevity and optimal performance of your WMF Spice Mill De Luxe grinding mechanism.

• Cleaning: The grinding mechanism is dishwasher safe. For best results, disassemble the mill and place the grinding cone and adjustment wheel in the dishwasher. Alternatively, hand wash with warm soapy water and a brush to remove spice residue. Rinse thoroughly and allow all parts to dry completely before reassembly.
• Drying: Ensure all components are completely dry before reassembling and storing the mill to prevent moisture-related issues.
• Storage: Store your spice mill in a dry place away from direct sunlight and excessive heat.

Troubleshooting

If you encounter issues with your WMF Spice Mill De Luxe after installing the new grinding mechanism, consider the following common solutions:

• Mill Not Grinding or Grinding Poorly:
  • Check if the mill is properly filled with spices.
  • Ensure the adjustment wheel is not set to an extremely fine setting that might clog the mechanism. Adjust to a coarser setting and test.
  • Disassemble and clean the grinding mechanism thoroughly to remove any lodged spice particles.
  • Verify that the grinding cone and adjustment wheel are correctly installed and secured.
• Difficulty Turning the Mill:
  • The grind setting might be too fine, causing resistance. Adjust to a coarser setting.
  • The mill might be overfilled. Remove some spices.
  • Clean the mechanism to ensure no sticky residue or large spice pieces are obstructing movement.

Specifications

Warranty and Support

For warranty information or technical support regarding your WMF Spice Mill De Luxe grinding mechanism, please refer to the original product documentation of your WMF Spice Mill De Luxe or contact WMF customer service directly. Contact details can typically be found on the official WMF website or included with your original product purchase.