1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Carrera 20061644 GO/Digital 143 Ice Curve 1/90° (2) Slot Car Racing Accessory. The ice curve is designed to introduce a challenging element to your slot car track, requiring precise driving skills.
This accessory is compatible with Carrera GO!!!, GO!!! Plus, and DIGITAL 143 race track systems, operating at a 1:43 scale. It allows for expansion and customization of your existing track layout.
2. Safety Information
- Warning: Not suitable for children under 36 months due to small parts which may present a choking hazard.
- Adult supervision is recommended during assembly and operation, especially for younger users.
- Ensure all track connections are secure before operating to prevent disconnections during use.
- Keep fingers and loose clothing away from moving parts of the slot cars and track.
3. Package Contents
The package contains the following items:
- Two (2) Carrera GO/Digital 143 Ice Curve 1/90° track sections.
Image 1: Two Carrera Ice Curve 1/90° track sections. These white track pieces feature two parallel slots for slot cars and metallic rails for power, designed to form a 90-degree turn.
4. Setup
To integrate the Carrera Ice Curve sections into your existing track:
- Plan Your Layout: Determine where the 1/90° ice curves will best fit into your track design to create a challenging turn.
- Connect Track Sections: Align the connectors of the ice curve sections with the adjacent track pieces. Press firmly until they click into place, ensuring a secure and flush connection.
- Ensure Power Continuity: Verify that the metallic rails on the ice curve sections make proper contact with the rails of the connected track pieces to ensure uninterrupted power supply to the slot cars.
- Test Connections: After assembly, run a slot car slowly over the newly installed sections to confirm smooth transitions and power flow.
For detailed instructions on general track assembly and power connection, refer to the instruction manual provided with your main Carrera GO!!!, GO!!! Plus, or DIGITAL 143 race track set.
Image 2: A single Carrera Ice Curve 1/90° track section, viewed from above. This image highlights the smooth, light-colored surface and the two metallic power rails embedded within the curve, designed for slot car operation.
5. Operating Instructions
The Carrera Ice Curve is designed to add a unique challenge to your slot car racing experience. Due to its specialized surface, cars will experience reduced grip compared to standard track sections.
- Reduced Grip: Slot cars will have less traction on the ice curve. This requires drivers to reduce speed and apply throttle with greater precision to navigate the turn successfully.
- Driving Technique: Approach the curve at a controlled speed. Over-acceleration will likely cause the car to lose grip and deslot. Practice is key to mastering the optimal speed and throttle control for this section.
- Drifting: With practice, it is possible to achieve controlled drifts through the ice curve, adding an advanced driving dynamic to your races.
- Non-Magnetic Surface: Be aware that the ice curve track sections may not have the same magnetic properties as standard track sections. This means the magnets in your slot cars may have reduced or no effect, further contributing to the reduced grip and requiring more skill to keep cars on the track.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ice curve track sections:
- Cleaning: Periodically wipe the track surface and metallic rails with a clean, dry, lint-free cloth to remove dust, dirt, and debris. Avoid using abrasive cleaners or solvents.
- Inspection: Regularly inspect the track sections for any signs of damage, such as cracks, bent connectors, or corroded metallic rails. Damaged sections should be replaced to ensure safe and consistent operation.
- Storage: When not in use, store the track sections in a clean, dry place away from direct sunlight and extreme temperatures to prevent warping or material degradation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car frequently deslots on the ice curve. | Excessive speed; lack of grip; non-magnetic surface effect. | Reduce speed when entering the curve. Practice throttle control. Understand that the ice curve inherently offers less grip. |
| Car loses power or stutters on the ice curve. | Poor track connection; dirty metallic rails. | Ensure track sections are securely connected. Clean the metallic rails on the ice curve and adjacent sections. |
| Difficulty keeping car on track even at low speeds. | Car guide keel or braids are worn; track surface is excessively dirty. | Check and replace worn guide keels or braids on the slot car. Clean the track surface thoroughly. |
8. Specifications
- Model Number: 20061644
- Product Dimensions: 7.87 x 7.87 x 5.91 inches (approximate, for a single curve)
- Item Weight: 8.8 ounces (total for the package)
- Material: 99% Plastic, 1% Metal
- Scale: 1:43
- Curve Angle: 1/90° (each section)
- Compatibility: Carrera GO!!!, Carrera GO!!! Plus, Carrera DIGITAL 143
- Manufacturer Recommended Age: 6 years and up
9. Warranty and Support
For information regarding product warranty, please refer to the documentation provided with your original purchase or contact the retailer where the product was acquired. Specific warranty terms may vary by region and retailer.
For further technical support or inquiries, please visit the official Carrera website or contact their customer service department. You can find more information about Carrera products at the Carrera Store on Amazon.
