Product Overview
The Bemis 1500EC 006 Elongated Toilet Seat is crafted from durable molded wood with a superior high-gloss finish designed to resist chipping and scratching. This seat features Easy Clean & Change hinges, allowing for quick removal and replacement, simplifying cleaning and maintenance. Its warm Bone color and stylish design complement various bathroom decors, providing both practical functionality and an elevated aesthetic.
Key features include:
- Easy Clean & Change Hinges: Designed for convenience, hinges easily release the seat for thorough cleaning.
- Durable Enameled Wood: Built to withstand daily use without cracking, warping, chipping, or staining.
- Warm Bone Color: Smooth contours and a refined shape in a cozy shade to enhance bathroom aesthetics.
- Quick & Easy Installation: Simple DIY upgrade that can be completed in minutes.
- Elongated Compatibility: Fits all standard elongated toilet brands and models (14.12” wide x 19.24” long).
Measuring for Your Toilet Seat
Before installation, ensure you have the correct size seat for your toilet. Toilets typically come in two sizes: Round and Elongated. Use a tape measure to determine your size by measuring from the center of the hinge holes to the front of the toilet bowl.
- Round: Approximately 16 1/2 inches.
- Elongated: Approximately 18 1/2 inches.
Image: Visual guide for measuring toilet seat length to determine if it's round or elongated.
Video: Official Bemis guide on how to measure your toilet for the correct seat size (Round or Elongated).
Setup and Installation
Installing your Bemis toilet seat is a straightforward process. The Easy Clean & Change hinges are designed for quick and secure attachment.
Tools Needed:
- Flat-head screwdriver (optional, for extra tightening)
Installation Steps:
- Prepare the Toilet: Ensure the toilet bowl is clean and free of any old hardware.
- Insert Bolts: Turn the hinge anchor covers to the unlock position (usually by turning left). Push the long plastic bolts (Phillips head first) into the toilet's seat mounting holes from the top. They should snap in.
- Secure Nuts: From the bottom of the toilet, screw the black plastic nuts onto the long plastic bolts. Tighten them as much as possible by hand. The broad end of the nut should be first for easier grip.
- Attach Seat: Place the toilet seat onto the secured bolts. Ensure the hinges align with the bolts.
- Lock Hinges: Turn the hinge anchor covers to the lock position (usually by turning right) to secure the seat.
- Final Tightening (Optional): For extra security, unlock the hinges and remove the seat, and use a Phillips screwdriver to tighten the bolts from the top while holding the nuts from below. Reattach and lock the seat.
Image: Step-by-step visual guide for easy toilet seat installation.
Video: Official Bemis video demonstrating the installation of Twist Cap Hinge toilet seats.
Maintenance and Cleaning
The Bemis 1500EC 006 toilet seat is designed for easy cleaning thanks to its Quick-Release hinges. Regular cleaning will help maintain its high-gloss finish and extend its lifespan.
Cleaning Steps:
- Unlock Hinges: Turn the hinge anchor covers to the unlock position.
- Remove Seat: Lift the entire toilet seat off the toilet bowl. The bolts will remain in place.
- Clean: Use a soft damp cloth with mild soap and water, or anti-bacterial wipes, to clean the seat and the toilet bowl area around the bolts.
- Avoid Harsh Chemicals: Do not use bleach, abrasive cleaners, or brushes, as these can damage the finish.
- Reattach Seat: Once clean, place the seat back onto the bolts and turn the hinge anchor covers to the lock position.
Image: Recommended cleaning methods for your toilet seat, emphasizing gentle cleaners.
Troubleshooting
If you encounter any issues with your Bemis toilet seat, consider the following common solutions:
- Seat Wobbles or Loosens: This is a common issue with many toilet seats. The Bemis Easy Clean & Change hinges allow for easy re-tightening. Unlock the hinges, remove the seat, and use a Phillips screwdriver to tighten the bolts from the top while holding the nuts from below. Reattach and lock the seat.
- Hinges Not Locking: Ensure the hinge anchor covers are fully turned to the lock position. If they are stiff, try applying a small amount of silicone lubricant (avoid petroleum-based products) to the moving parts.
- Color Mismatch: While this model is Bone, colors can vary slightly between manufacturers and even batches. If the color is not as expected, verify the product code and consider contacting customer support for color matching assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Bemis |
| Model Number | 7BA1500EC 006 |
| Color | Bone |
| Material | Wood |
| Style | Toilet Seat |
| Shape | Oval (Elongated) |
| Product Dimensions (L x W) | 18.5"L x 16.5"W |
| Item Weight | 6.5 Pounds |
| Unit Count | 1.0 Count |
| Included Components | Toilet seat; hardware |
| Operation Mode | Twist (for hinges) |
Warranty and Support
Bemis Manufacturing Company provides a manufacturer warranty that covers US and Canada customer purchases for 1 year from the date of purchase. For warranty claims or additional support, please refer to the contact information provided on the product packaging or visit the official Bemis website.
For further assistance, helpful video resources on measuring, installing, and cleaning your Bemis toilet seat are available online.