Product Overview
The KOHLER 77834-CP Hood Drain Assembly is designed for bathtubs, providing the necessary components for a functional trip drain mechanism. This assembly features a polished chrome finish, ensuring durability and a coordinated aesthetic with other bathroom fixtures. It is a genuine Kohler part, engineered for reliable performance and compatibility with Kohler products.
Image: The KOHLER 77834-CP Hood Drain Assembly, showcasing its polished chrome finish and design for bathtub use.
Key Features:
- Genuine KOHLER part, ensuring quality and compatibility.
- Polished Chrome finish for a sleek appearance.
- Designed for bathtub drain applications.
- Includes the hood and drain assembly components.
Setup and Installation
This drain assembly is intended for installation in bathtubs. It is often used as a replacement part for existing drain mechanisms. Please ensure you have all necessary tools and additional components before beginning installation.
Important Considerations:
- This assembly typically includes the visible hood and drain components.
- Users may need to reuse existing screws, the trip lever rod, and the cotter pin from their previous drain assembly, as these items are often not included with this specific part. Verify your existing components are in good condition for reuse.
- Refer to your bathtub's original installation guide or a professional plumber for detailed steps on removing the old drain assembly and installing the new one.
General Installation Steps (Consult a professional if unsure):
- Turn off the water supply to the bathtub.
- Remove the existing drain assembly, including the overflow plate and drain stopper mechanism.
- Clean the area around the drain and overflow opening thoroughly.
- Install the new KOHLER 77834-CP Hood Drain Assembly, ensuring proper alignment and a watertight seal. Use plumber's putty or silicone sealant as recommended by your bathtub manufacturer.
- Connect the trip lever rod and cotter pin (if reusing existing ones) to the new hood assembly.
- Secure the overflow plate to the bathtub using the appropriate screws.
- Test for leaks by filling the bathtub and observing the drain and overflow areas.
Operating Instructions
The KOHLER 77834-CP Hood Drain Assembly functions as part of a trip lever drain system. To operate the drain stopper:
- To close the drain and retain water in the tub, manipulate the trip lever (located on the overflow plate, not included with this specific part) to the "down" or "closed" position. This action engages the stopper mechanism within the drain.
- To open the drain and allow water to flow out, manipulate the trip lever to the "up" or "open" position. This disengages the stopper, allowing the tub to drain.
Note: The design of this hood drain assembly allows the trip lever to point downwards when closed, which can be a safety feature in bathtubs, reducing protrusion.
Maintenance
Proper maintenance ensures the longevity and appearance of your KOHLER 77834-CP Hood Drain Assembly.
- Cleaning: To maintain the polished chrome finish, wipe the assembly with a soft, dry cloth regularly. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically inspect the drain assembly for any signs of wear, corrosion, or loose connections.
- Drain Function: If the drain stopper mechanism becomes stiff or does not operate smoothly, it may require lubrication or adjustment of the trip lever rod. Consult a plumbing professional if issues persist.
Troubleshooting
Here are solutions to common issues encountered with the KOHLER 77834-CP Hood Drain Assembly:
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing screws, rod, or cotter pin | This assembly is a replacement part and often does not include these components. | Reuse the screws, rod, and cotter pin from your old drain assembly. If they are damaged or missing, acquire suitable replacements from a hardware store or Kohler parts supplier. |
| Drain does not seal properly | Improper installation, worn stopper, or misaligned trip lever rod. | Ensure the assembly is installed correctly with proper sealant. Check the condition of the stopper and the alignment of the trip lever rod. Adjust or replace components as needed. |
| Drain is slow or clogged | Accumulation of hair, soap scum, or debris. | Remove the drain stopper and clear any obstructions. Use a drain snake or a chemical drain cleaner (follow product instructions carefully). |
Specifications
| Feature | Detail |
|---|---|
| Brand | Kohler |
| Model Number | 77834-CP |
| Color | Polished Chrome |
| Material | Metal |
| Product Dimensions (D x W x H) | 3.25" x 3.25" x 2" |
| Finish Type | Polished |
| Shape | Oval |
| Drain Type | Pop-Up (part of a trip lever system) |
| Item Weight | 3.2 ounces |
| Included Components | HOOD, DRAIN ASSY |
| UPC | 040688984261 |
Warranty Information
Kohler products are manufactured to high-quality standards. While specific warranty terms for the 77834-CP Hood Drain Assembly are not detailed here, using genuine KOHLER parts is crucial for maintaining the integrity and warranty of your overall Kohler plumbing system.
Image: Benefits of using KOHLER Genuine Parts, including warranty protection.
For detailed warranty information, please refer to the official Kohler website or contact Kohler customer service directly.
Support
If you require further assistance with your KOHLER 77834-CP Hood Drain Assembly, please utilize the following resources:
- Kohler Official Website: Visit www.kohler.com for product information, FAQs, and support contacts.
- Customer Service: Contact Kohler customer service for technical support or to inquire about replacement parts. Refer to the official website for current contact details.
- Professional Plumbing Assistance: For complex installations or repairs, it is recommended to consult a qualified plumbing professional.
