1. Introduction
This user manual provides essential information for the safe and effective use of your Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb. This high-performance lamp is designed for various applications requiring bright, white light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Safety Information
WARNING: Halogen bulbs operate at high temperatures and can cause burns or fire if not handled properly. Always allow the bulb to cool completely before handling.
- Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves when handling.
- Ensure the power supply is disconnected before installing, removing, or cleaning the bulb.
- Use only in fixtures rated for the bulb's wattage and voltage (600W, 120V).
- Do not use if the glass envelope is scratched or cracked.
- Keep away from flammable materials.
- Dispose of used bulbs according to local regulations.
3. Product Overview
The Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb is a high-quality lamp featuring a robust tungsten filament designed to produce a brighter, whiter light. Its T-4 shape and R7s base make it suitable for specific lighting fixtures.
4. Specifications
| Specification | Value |
|---|---|
| Brand | Eiko |
| Model Number | FCB |
| Light Type | Halogen |
| Wattage | 600 watts |
| Voltage | 120 Volts |
| Bulb Shape Size | T4 |
| Base Type | R7s |
| Color Temperature | 3200 Kelvin |
| Light Color | Bright White |
| Material | Tungsten |
| Product Dimensions | 1 x 1 x 2.7 inches |
| Item Weight | 0.353 ounces |
| UPC | 031293031006 |
5. Setup / Installation
Follow these steps to safely install your Eiko FCB halogen bulb:
- Ensure Power is Off: Before beginning, turn off the power to the fixture at the circuit breaker or fuse box. Verify that the fixture is completely de-energized.
- Allow Cooling: If replacing an existing bulb, allow the old bulb to cool down completely before touching it.
- Wear Gloves: Handle the new bulb with a clean, lint-free cloth or gloves. Avoid touching the glass envelope directly with bare hands.
- Remove Old Bulb (if applicable): Carefully remove the old R7s base bulb from its spring-loaded socket. Gently push one end into the socket and pull the other end out.
- Insert New Bulb: Align the R7s pins of the new bulb with the corresponding slots in the fixture's socket. Gently push one end of the bulb into its socket, then compress the spring-loaded mechanism to allow the other end to slide into place. Ensure both ends are securely seated.
- Restore Power: Once the bulb is securely installed, restore power to the fixture.
- Test: Turn on the light switch to confirm proper operation.
6. Operating Instructions
The Eiko FCB halogen bulb operates immediately upon receiving power. Simply turn on the light switch connected to the fixture to illuminate the bulb. There are no special operating procedures beyond standard electrical safety practices.
- Ensure the fixture's switch is in the 'OFF' position before connecting power.
- Turn the switch to 'ON' to activate the bulb.
- For optimal bulb life, avoid frequent on/off cycling.
7. Maintenance
Proper maintenance can extend the life and performance of your halogen bulb:
- Cleaning: If the bulb's glass becomes dirty or smudged, turn off the power and allow the bulb to cool completely. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
- Replacement: Halogen bulbs dim over time. For best performance, consider replacing bulbs when their light output noticeably decreases. Always replace with a bulb of the same wattage and voltage (FCB 120V 600W T-4 R7s Base).
- Inspection: Periodically inspect the bulb and fixture for any signs of damage or wear.
8. Troubleshooting
If you encounter issues with your Eiko FCB halogen bulb, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up | No power to fixture Bulb not properly seated Bulb is burnt out Faulty fixture or switch | Check circuit breaker/fuse Ensure bulb is fully inserted Replace bulb Consult an electrician |
| Bulb flickers | Loose connection Incorrect dimmer switch (if applicable) Voltage fluctuations | Turn off power and re-seat bulb Ensure dimmer is compatible with halogen Consult an electrician |
| Bulb burns out quickly | Frequent handling of glass Over-voltage Excessive vibration Poor ventilation in fixture | Handle with gloves/cloth Verify fixture voltage Ensure stable mounting Check fixture for proper airflow |
If the problem persists after attempting these solutions, please contact a qualified electrician or the manufacturer's support.
9. Warranty and Support
Eiko products are manufactured to high standards and are designed for reliable performance. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Eiko website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.
Eiko Customer Support: Please visit www.eiko.com for contact information and further assistance.
