Hoover Max Extract Dual V WidePath Carpet Cleaner Machine F7412900 User Manual

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Hoover Max Extract Dual V WidePath Carpet Cleaner Machine, Model F7412900. Please read all instructions carefully before using the appliance.

The Hoover Max Extract Dual V WidePath Carpet Cleaner is designed to deep clean carpets and upholstery, removing dirt and stains. It features SpinScrub brushes for thorough cleaning, Dual-V Technology for powerful suction, and a WidePath nozzle for efficient coverage.

2. Safety Information

Always follow basic safety precautions when using an electrical appliance to reduce the risk of fire, electric shock, or injury. Keep this manual for future reference.

• Read all instructions before operating the appliance.
• Do not leave the appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only Hoover recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Connect to a properly grounded outlet only. See grounding instructions.

3. Product Overview

The Hoover Max Extract Dual V WidePath Carpet Cleaner is designed for efficient and effective carpet and upholstery cleaning. Key features include:

• WidePath Nozzle: Features a sixth brush for 20% more cleaning action compared to five-brush models.
• SpinScrub Technology: 360-degree cleaning action gently loosens dirt and cleans all sides of carpet and upholstery fibers.
• Powerful 12-Amp Motor: Provides strong suction and cleaning power.
• Heated Cleaning: Applies heat directly to the carpet to aid in cleaning and faster drying.
• SmartTanks System: Separate tanks for clean and dirty water allow for easy filling, emptying, and rinsing.
• Included Tools: Comes with a SpinScrub Powered Hand Tool, Upholstery Tool, and a removable tool caddy for convenient storage.

Figure 3.1: Front view of the Hoover Max Extract Dual V WidePath Carpet Cleaner Machine, highlighting its transparent tanks and wide cleaning head.

Figure 3.2: Back view of the carpet cleaner, showing the power cord neatly wrapped around the cord hooks.

Figure 3.3: Side view illustrating the separate clean and dirty water tanks, part of the SmartTanks System.

4. Setup

Before first use, ensure all components are present and the machine is assembled correctly.

1. Unpack the Machine: Carefully remove all contents from the packaging.
2. Handle Assembly: Attach the upper handle to the main body of the cleaner. Ensure it clicks securely into place.
3. Fill the Clean Water Tank: Remove the clean water tank (usually the upper tank) and fill it with warm tap water up to the indicated fill line.
4. Add Cleaning Solution: Pour the recommended Hoover cleaning solution into the solution reservoir. The SmartTanks System automatically mixes the solution with water. Do not overfill.
5. Replace Tanks: Securely place both the clean water and dirty water tanks back onto the machine.
6. Prepare Area: Vacuum the area to be cleaned thoroughly to remove loose dirt and debris. Move furniture as needed.

5. Operating Instructions

Follow these steps for effective carpet and upholstery cleaning.

5.1 Carpet Cleaning

1. Plug In: Plug the cleaner into a grounded electrical outlet.
2. Power On: Turn on the machine using the power switch.
3. Select Mode: On the handle, select either 'Wash' for applying solution and scrubbing, or 'Rinse' for applying clean water only. The 'Wash' setting engages the SpinScrub brushes and dispenses cleaning solution.


Figure 5.1: Handle controls for selecting 'Wash' or 'Rinse' mode and the power switch.

4. Cleaning Passes:
   • For washing, push the cleaner forward slowly while pressing the trigger to dispense solution. Release the trigger and pull the cleaner backward slowly over the same area to extract dirty water.
   • Overlap each pass slightly to ensure even cleaning.
   • For rinsing, switch to the 'Rinse' setting and repeat the forward and backward passes without solution, using only clean water to remove detergent residue.
5. Empty Dirty Water: When the dirty water tank is full or the clean water tank is empty, turn off and unplug the machine. Remove and empty the dirty water tank. Rinse it thoroughly before replacing.
6. Refill Clean Water: Refill the clean water tank and solution as needed.
7. Drying: Allow the carpet to dry completely before walking on it. The Heated Cleaning feature helps reduce drying time.

5.2 Upholstery and Spot Cleaning

Use the included tools for targeted cleaning.

1. Attach Hose and Tool: Open the accessory hose port and securely attach the hose. Connect the desired cleaning tool (SpinScrub Powered Hand Tool or Upholstery Tool) to the end of the hose.


Figure 5.2: The SpinScrub Powered Hand Tool, ideal for stairs and tough spots.


Figure 5.3: The Upholstery Tool, suitable for cleaning fabric surfaces.
2. Clean Surface: Press the trigger on the tool to spray solution, then scrub the area. Release the trigger and use the tool to suction up the dirty water.


Figure 5.4: Demonstrating the SpinScrub Powered Hand Tool being used to clean carpeted stairs.

3. Rinse: For best results, rinse the cleaned area with clean water using the tool.
4. Detach and Store: After use, detach the hose and tool, rinse them, and store them in the tool caddy.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your carpet cleaner.

1. Empty and Rinse Tanks: After each use, empty both the clean and dirty water tanks. Rinse them thoroughly with warm water to prevent residue buildup.
2. Clean Brushes: The SpinScrub brushes are removable for easy cleaning. Turn off and unplug the machine, then follow the instructions in the diagram below to remove and rinse the brushes. Ensure they are free of hair and debris.


Figure 6.1: Underside view of the cleaning head, showing the SpinScrub brushes. These brushes are designed for easy removal and cleaning.

3. Clean Nozzle: Inspect the nozzle for any blockages and clean as necessary.
4. Wipe Down Machine: Wipe the exterior of the machine with a damp cloth.
5. Store Properly: Store the cleaner in a dry, indoor area. Wrap the power cord neatly around the cord hooks.

7. Troubleshooting

If you encounter issues with your carpet cleaner, refer to the following common problems and solutions.

• Machine Not Turning On:
  • Check if the power cord is securely plugged into a working electrical outlet.
  • Ensure the power switch on the handle is in the 'ON' position.
  • Check your household circuit breaker or fuse box.
• No Suction or Poor Suction:
  • Verify that the dirty water tank is properly seated and sealed.
  • Check if the dirty water tank is full and needs emptying.
  • Inspect the nozzle and hose for blockages. Clear any obstructions.
  • Ensure the clean water tank is not empty and solution is being dispensed.
• No Solution Dispensing:
  • Check if the clean water tank and solution reservoir are filled.
  • Ensure the 'Wash' setting is selected on the handle.
  • Verify that the trigger is being pressed during forward passes.
• Leaking:
  • Ensure both clean and dirty water tanks are correctly seated and their caps/lids are securely closed.
  • Check for any cracks or damage to the tanks or seals.
  • Do not overfill tanks.
• Brushes Not Spinning:
  • Check for hair or debris wrapped around the SpinScrub brushes. Clean them as described in the Maintenance section.
  • Ensure the machine is powered on and the 'Wash' setting is selected.

If the problem persists after attempting these solutions, contact Hoover customer support.

8. Specifications

9. Warranty and Support

Your Hoover Max Extract Dual V WidePath Carpet Cleaner Machine F7412900 comes with a 1-year warranty on parts and motor from the date of purchase. This warranty covers defects in material or workmanship under normal household use.

For warranty claims, technical support, or to purchase replacement parts and accessories, please contact Hoover customer service or visit the official Hoover store online.

Official Hoover Store: Visit the Hoover Store on Amazon