Smeg SE70SGH-5 Gas Hob Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your new Smeg SE70SGH-5 integrated gas hob. Please read these instructions carefully before installation and use, and keep them for future reference. Proper installation, operation, and maintenance are crucial for optimal performance and safety.

2. Safety Information

Your safety and the safety of others are paramount. This appliance is designed for domestic use only. Incorrect installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Read all instructions thoroughly before using this appliance.

• Gas Safety: Ensure the appliance is installed by a qualified technician in accordance with local regulations and standards. Verify that the gas supply type matches the appliance specifications.
• Electrical Safety: If an electrical connection is required for ignition, ensure it is correctly earthed and installed by a qualified electrician.
• Ventilation: Adequate ventilation must be provided in the room where the appliance is installed to prevent the build-up of unburnt gases.
• Children and Vulnerable Persons: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Hot Surfaces: The hob and pan supports become very hot during use. Always use oven mitts or appropriate protection when handling hot items.
• Flammable Materials: Do not store or use flammable materials near the hob.
• Cleaning: Always switch off the appliance and allow it to cool before cleaning.

3. Product Overview

The Smeg SE70SGH-5 is an integrated gas hob featuring five burners, designed for efficient and versatile cooking. Its stainless steel surface ensures durability and ease of cleaning.

Figure 1: Top-down view of the Smeg SE70SGH-5 gas hob. This image displays the five gas burners, including a central wok burner, and the corresponding control knobs located at the front of the unit. The robust cast-iron pan supports are also visible.

Components:

• Burners: Five gas burners of varying sizes, including a central high-power wok burner.
• Pan Supports: Durable cast-iron pan supports for stable placement of cookware.
• Control Knobs: Individual control knobs for each burner, located at the front for easy access.
• Ignition System: Integrated automatic ignition for convenient burner lighting.
• Flame Failure Device: A safety mechanism that automatically cuts off the gas supply if the flame accidentally extinguishes.

4. Setup and Installation

Installation of this gas hob must be carried out by a qualified and registered installer in accordance with all relevant local and national regulations and standards.

4.1 Unpacking

• Carefully remove the hob from its packaging.
• Check for any damage during transit. If damage is found, do not install the appliance and contact your supplier.
• Retain packaging materials for potential future transport or return.

4.2 Cut-out Dimensions

Ensure the countertop cut-out dimensions are precise for a secure and flush installation.

Figure 2: Installation diagram illustrating the required cut-out dimensions for the Smeg SE70SGH-5 gas hob. The diagram specifies a width of 555-560mm and a depth of 478-482mm for the opening, with a minimum clearance of 50mm from the rear edge.

• Hob Dimensions: 68.5 cm (width) x 50 cm (depth) x 3.2 cm (height).
• Cut-out Width: 555-560 mm.
• Cut-out Depth: 478-482 mm.
• Minimum Clearance: A minimum of 50 mm from the rear edge of the cut-out to the wall.

4.3 Gas Connection

The gas connection must be performed by a qualified gas fitter. Ensure the gas supply pressure and type (Natural Gas or Propane) are compatible with the appliance. A gas shut-off valve must be installed in an accessible location near the hob.

4.4 Electrical Connection

If your model includes an electric ignition system, the electrical connection must be performed by a qualified electrician. Ensure the voltage and frequency match the appliance's requirements and that the appliance is properly earthed.

4.5 Ventilation

Proper ventilation is essential. Ensure the kitchen is adequately ventilated to disperse heat and combustion products. This may involve an extractor hood or an open window.

5. Operating Instructions

Familiarize yourself with the control knobs and burner layout before operating the hob.

Figure 3: The Smeg SE70SGH-5 gas hob in operation, showcasing its integrated design within a kitchen countertop. The image highlights the active flames on the burners, demonstrating the appliance during use.

5.1 Igniting a Burner

1. Place your cookware centrally on the pan support over the desired burner.
2. Push down the corresponding control knob and turn it counter-clockwise to the maximum flame setting (large flame symbol).
3. Hold the knob down for a few seconds to allow the flame failure device to activate. You should hear a clicking sound as the igniter sparks.
4. Once the flame is lit, release the knob. If the flame goes out, repeat the process, holding the knob down for a slightly longer period.

5.2 Adjusting the Flame

• To increase the flame, turn the knob further counter-clockwise towards the large flame symbol.
• To decrease the flame, turn the knob clockwise towards the small flame symbol.
• To turn off the burner, turn the knob clockwise until it clicks into the 'off' position (dot symbol).

5.3 Using Cookware

• Use pots and pans with flat bases that are appropriate for the size of the burner.
• Ensure the flame does not extend beyond the base of the cookware to prevent energy waste and damage to handles.
• The central wok burner is designed for larger pans and high-heat cooking.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your hob.

6.1 Cleaning the Hob Surface

• Always ensure the hob is cool before cleaning.
• Wipe the stainless steel surface with a soft cloth and a mild detergent solution.
• For stubborn stains, use a non-abrasive stainless steel cleaner. Always wipe in the direction of the grain.
• Avoid abrasive cleaners, scouring pads, or harsh chemicals as they can scratch or damage the surface.

6.2 Cleaning Burner Components and Pan Supports

• Remove the pan supports, burner caps, and burner crowns when cool.
• Wash these components in warm soapy water. For stubborn food residues, they can be soaked.
• Ensure all components are thoroughly dry before reassembling them. Moisture can affect ignition.
• Periodically check that the burner holes are clear of debris. Use a small brush or needle if necessary.

7. Troubleshooting

Before contacting service, please refer to the following common issues and solutions:

If you are unable to resolve an issue using the troubleshooting guide, please contact a qualified service technician.

8. Specifications

Detailed technical specifications for the Smeg SE70SGH-5 gas hob:

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product or contact your retailer. In case of technical issues or for spare parts, please contact Smeg customer service or an authorized service center. Always provide the model number (SE70SGH-5) when seeking support.