1. Product Overview
The TayMac MM710C is a single-gang weatherproof in-use cover designed to safely protect electrical outlets. It features a 4 3/4-inch deep clear finish and is suitable for both horizontal and vertical mounting. The patented Multi-Mac Universal Fit system allows for versatile use with various receptacles. Constructed from durable high-impact polycarbonate, it resists breakage and corrosion. Installation is simplified with a quick-fit keyhole mount and patented knock-out technology for a custom fit. This cover meets or exceeds OSHA and NEC (article 406.8[b][1]) wet location requirements when a cord is plugged into the receptacle.

Image: TayMac MM710C 1-Gang Deep JUMBO Clear Weatherproof Outlet Cover, showing its clear design and depth.
2. Key Features
- Weatherproof Protection: NEMA rated and cULus listed for wet and damp locations, ensuring maximum toughness and protection.
- Easy Installation: Quick-Fit keyhole mounting system with a patented EZ Change Pin for under-a-minute installation and flexible horizontal or vertical mounting.
- 16 Custom Configurations: Universal Fit Adapter system Technology provides 16-in-1 custom device configurations, allowing protection for duplex, switch, or GFCI outlets.
- Quality Construction: Built from high-impact polycarbonate for maximum durability, offering ample room for electrical cords. Includes gasket and mounting hardware.
- Safe and Secure: Tested and certified to cULus and NEMA standards. Features a lockable tab compatible with a full-size padlock for tamper protection.

Image: Visual representation of key features including polycarbonate construction, easy installation, weatherproof design, and a lockable tab.
3. Setup and Installation
Before beginning installation, ensure all power to the outlet is turned off at the circuit breaker to prevent electrical shock. This product is designed for easy installation on various surfaces.
3.1 Components Included
- Weatherproof Cover
- Base
- Mounting Screws
- Two Adapter Plates
3.2 Installation Steps
- Prepare the Base: If needed, snap the appropriate adapter plates into the back of the base (the side with the attached gasket).
- Remove Cord Port: For vertical installation, use pliers to remove the single cord port located on the bottom side of the base. For horizontal installation, remove the cord ports on the wider side.
- Turn Off Power: Ensure the power to the electrical outlet is OFF at the circuit breaker.
- Loosen Device Screws: Back out the device mounting screws on your existing outlet by about half an inch.
- Apply Sealant (Optional): If installing on a rough or uneven surface, apply a quarter-inch bead of silicone caulk between the base and the wall surface to ensure a watertight seal.
- Mount the Base: Align the keyholes on the base with the loosened screws on the outlet. Slide the base over the screws and then tighten the screws until the gasket is compressed and the base is snug against the wall.
- Attach the Cover: To attach the clear cover, angle it between 60 and 80 degrees relative to the base. Align the hinge pins on the base with the corresponding holes on the cover, then push sideways to snap the cover securely into place.
Video: Manufacturer's guide demonstrating the installation process of the TayMac MM710C weatherproof outlet cover, including preparing the base, mounting, and attaching the cover.
Video: A user review demonstrating the installation and functionality of the TayMac MM710C weatherproof outlet cover, showing how it accommodates plugs and closes securely.

Image: Detailed dimensions of the TayMac MM710C cover, showing its depth and width for proper fitment.
4. Operating Instructions
Once installed, the TayMac MM710C cover is ready for use. Simply plug your electrical cord into the receptacle. The deep design of the cover allows for cords to remain plugged in while the cover is closed, providing continuous weatherproof protection.
- Open the clear cover by lifting it upwards.
- Insert the plug of your electrical device into the outlet.
- Carefully close the clear cover over the plugged-in cord. Ensure the cord exits through the designated port at the bottom or side, and that the cover latches securely.
- For added security, a padlock can be inserted through the lockable tab to prevent tampering.
Video: A short demonstration showing how the TayMac MM710C cover closes securely over a plugged-in cord, highlighting its in-use weatherproof capability.

Image: The TayMac MM710C cover closed with an orange electrical cord plugged into the outlet, demonstrating its spacious interior and clear visibility.
5. Maintenance
The TayMac MM710C weatherproof outlet cover requires minimal maintenance. Periodically inspect the cover for any signs of damage, cracks, or wear on the gasket. Clean the clear cover with a soft, damp cloth and mild soap if necessary. Avoid using abrasive cleaners or solvents that could damage the polycarbonate material.
6. Troubleshooting
If the cover does not close properly or appears to be leaking, check the following:
- Ensure the electrical cord is properly routed through the designated opening and not obstructing the cover's closure.
- Verify that the cover's hinge pins are correctly seated in the base's holes.
- Inspect the gasket for any debris, damage, or improper seating that might compromise the seal.
- Confirm that the mounting screws are tightened sufficiently to compress the gasket against the wall surface.
If issues persist, consult a qualified electrician.
7. Specifications
| Model Number | MM710C |
| Material | Polycarbonate |
| Color | Clear |
| Style | Deep JUMBO |
| Product Dimensions (D x W x H) | 30"D x 8"W x 6"H (Note: These dimensions appear to be for packaging or shipping, not the product itself. Refer to the dimension image for actual product size.) |
| Item Weight | 6.4 ounces |
| Installation Type | Wall Mounted |
| Finish Type | Plastic, Polycarbonate |
| Certifications | NEMA 3R, cULus Listed |

Image: TayMac MM710C displaying its cULus certification, indicating compliance with safety standards.
8. Warranty and Support
This product does not come with a specified warranty description according to the provided information. For further support, product inquiries, or to explore other TayMac products, please visit the official TayMac store: