Fiamma Carry Bike Pro - Bicycle Carrier Instruction Manual

1. Introduction

Thank you for choosing the Fiamma Carry Bike Pro, a high-quality bicycle carrier designed for caravans and motorhomes. This manual provides essential information for the safe and effective installation, operation, and maintenance of your bicycle carrier. Please read these instructions carefully before assembly and use to ensure optimal performance and safety.

2. Product Overview

The Fiamma Carry Bike Pro is a classic universal bicycle carrier featuring a 35mm diameter anodized silver aluminum tube base. It is designed for secure transport of bicycles on your caravan or motorhome.

• Robust Construction: Made with a 35mm diameter anodized silver aluminum tube base and stainless steel screws for durability.
• Protective Sponges: Includes protective sponges to safeguard your bicycles during transport.
• Adjustable Height: The carrier's height is adjustable from a minimum of 80 cm to a maximum of 140 cm.
• Telescopic Rotating Bar: Features a telescopic rotating bar made of stainless steel.
• Expandable Capacity: Comes standard for 2 bicycles and can be upgraded to carry up to 4 bicycles by adding 2 additional rails.
• Included Components: Supplied with 2 Bike Block Pro units for 2 bicycles. The rails for the first and third bicycles are pre-mounted.
• High Load Capacity: Maximum load capacity: 60 kg (including the support).
• Certified Safety: TÜV/GS certified for safety.

Figure 2.1: The Fiamma Carry Bike Pro bicycle carrier, showcasing its robust aluminum and stainless steel construction.

Figure 2.2: Technical diagram illustrating the key dimensions of the Fiamma Carry Bike Pro, including height (80-150 cm), width (60 cm), and rail length (128 cm).

3. Setup and Installation

The Fiamma Carry Bike Pro comes with an installation kit and frame support. Professional installation is recommended for optimal safety and performance.

3.1 Pre-Installation Checklist

• Ensure all components listed in the packaging are present.
• Verify the mounting surface on your caravan/motorhome is structurally sound and suitable for the carrier's weight and load capacity.
• Gather necessary tools (e.g., drill, wrenches, measuring tape).

3.2 Mounting Instructions

1. Positioning: Carefully position the carrier on the rear wall of your caravan/motorhome, ensuring it is level and does not obstruct lights or license plates.
2. Marking Drill Points: Use the carrier's mounting points to accurately mark the drilling locations on the vehicle's wall.
3. Drilling: Drill holes at the marked locations, taking care to avoid internal wiring or plumbing. Use appropriate drill bits for your vehicle's material.
4. Securing the Base: Attach the main base frame of the carrier to the vehicle using the provided stainless steel screws and frame support. Ensure all fasteners are tightened securely.
5. Assembling Uprights and Rails: Connect the vertical uprights and the pre-mounted bicycle rails to the base frame. Adjust the height of the uprights (80-140 cm) as needed for your vehicle and bicycle size.
6. Attaching Bike Blocks: Secure the Bike Block Pro units to the uprights. These will hold the bicycle frames.
7. Final Check: Before first use, double-check all connections, screws, and adjustments to ensure the carrier is firmly and safely installed.

4. Operating Instructions

Once installed, the Fiamma Carry Bike Pro is ready to transport your bicycles. Always ensure the total weight of the bicycles does not exceed the maximum load capacity of 60 kg.

4.1 Loading Bicycles

1. Prepare Rails: Ensure the bicycle rails are clear and ready to receive the bicycle wheels.
2. Position Bicycle: Lift the bicycle and place its wheels into the designated grooves on the rails.
3. Secure Frame: Use the Bike Block Pro to clamp securely around the bicycle's frame. Adjust the block to fit snugly, utilizing the protective sponges to prevent scratches.
4. Secure Wheels: Use the provided straps or quick-release mechanisms to firmly secure the bicycle wheels to the rails.
5. Repeat for Additional Bicycles: If carrying more than one bicycle, repeat the process. Ensure even weight distribution and that bicycles do not interfere with each other.
6. Check Clearance: Verify that the loaded bicycles do not obstruct rear lights, license plates, or the driver's view.

Figure 4.1: Two individuals demonstrating the process of loading bicycles onto the Fiamma Carry Bike Pro, highlighting the ease of use and secure positioning.

4.2 Unloading Bicycles

1. Release the wheel straps.
2. Unclamp the Bike Block Pro from the bicycle frame.
3. Carefully lift the bicycle off the rails.

5. Maintenance

Regular maintenance will extend the life of your Fiamma Carry Bike Pro and ensure its continued safe operation.

• Cleaning: Clean the carrier regularly with mild soap and water, especially after exposure to dirt, salt, or harsh weather conditions. Rinse thoroughly and dry.
• Lubrication: Periodically lubricate moving parts, such as the telescopic rotating bar and any hinge points, with a suitable lubricant to ensure smooth operation.
• Fastener Check: Regularly inspect all screws, bolts, and clamps for tightness. Re-tighten any loose fasteners to prevent vibration and potential damage.
• Component Inspection: Check the condition of the protective sponges, straps, and plastic components for wear, cracks, or damage. Replace any worn or damaged parts immediately.
• Storage: If removing the carrier for extended periods, store it in a clean, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

This section addresses common issues you might encounter with your bicycle carrier.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage, please refer to the documentation provided with your purchase or visit the official Fiamma website.

Should you require technical assistance, spare parts, or have any questions not covered in this manual, please contact Fiamma customer support or your authorized dealer.

Manufacturer: Fiamma
Website: www.fiamma.it