Introduction
Thank you for choosing the Progress Lighting P5604-31 1-Light Traditional Outdoor Wall Lantern. This fixture features a durable black powder-coated finish and a white opal glass diffuser, designed to enhance the exterior of your home. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture.
Key Features:
- One Light Wall Lantern from the Utility Lantern collection
- Height: 8.50 inches, Width: 6.00 inches
- Style: Traditional Outdoor
- Finish: Black
- Safety Rating: UL CUL and Safety Listing: Wet (suitable for outdoor use)
Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring.
- Read all instructions carefully before beginning installation.
- All wiring must be in accordance with national and local electrical codes.
- Ensure the fixture is properly grounded.
- Do not exceed the maximum wattage specified for the bulb.
- Wear safety glasses and gloves during installation.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Light Fixture (P5604-31)
- 1 x White Opal Glass Diffuser
- 1 x Installation Sheet
- Mounting Hardware (screws, wire nuts, etc.)
Note: Bulb is not included. This fixture uses (1) 100-Watt maximum medium base (E26) incandescent bulb.
Figure 1: Line drawing of the P5604-31 fixture, showing its spherical glass and mounting base.
Installation Guide
Follow these general steps for installing your outdoor wall lantern. Refer to the included installation sheet for detailed, model-specific instructions and diagrams.
1. Prepare for Installation
- Turn off power at the main circuit breaker or fuse box.
- Carefully unpack the fixture and components.
- Review the included installation sheet for specific wiring and mounting details.
2. Wall Lantern Placement and Sizing
Proper sizing and placement are crucial for both aesthetics and effective illumination. For entrances and garages, select fixtures that measure approximately 1/4 to 1/3 of the door's height. Mount them at eye level, about 5.5 to 6 feet from the ground to the center of the fixture.
Figure 2: Example of wall lantern sizing, recommending 1/4 of the door's height for the fixture.
Figure 3: Example of wall lantern placement for a garage, suggesting fixtures on either side of the doors.
3. Wiring and Mounting
- Attach the mounting bracket to the junction box using the provided screws.
- Connect the fixture's wires to the house wires according to the color codes (usually black to black, white to white, and ground to ground). Secure connections with wire nuts.
- Carefully tuck all wires into the junction box.
- Mount the fixture to the mounting bracket, securing it with the provided screws.
- Install the glass diffuser and bulb.
4. Video Guide: Sizing and Selection
For additional guidance on selecting and sizing outdoor lighting, watch the official Progress Lighting video below:
Video 1: Progress Lighting's guide on sizing and selecting outdoor lighting fixtures for various home exteriors.
Operation
Once installed, your Progress Lighting P5604-31 fixture operates like any standard outdoor light. Simply use your existing wall switch to turn the light on or off. Ensure the correct type and wattage of bulb (100-Watt maximum, medium base E26 incandescent) is installed for optimal performance and safety.
Maintenance
Cleaning
To maintain the appearance of your fixture, clean it regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass. Ensure the power is off before cleaning.
Bulb Replacement
Before replacing the bulb, turn off the power to the fixture at the circuit breaker. Allow the bulb to cool completely. Carefully remove the glass diffuser, unscrew the old bulb, and screw in a new 100-Watt maximum medium base (E26) incandescent bulb. Reattach the glass diffuser securely.
Troubleshooting
If your fixture is not operating correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Bulb is faulty 3. Incorrect wiring | 1. Check circuit breaker/fuse 2. Replace bulb 3. Verify wiring connections (consult electrician if needed) |
| Light flickers | 1. Loose bulb 2. Loose wiring connection 3. Incompatible dimmer switch | 1. Tighten bulb 2. Check wiring connections (power off first) 3. Ensure dimmer is compatible with incandescent bulbs |
Specifications
- Brand: Progress Lighting
- Model Number: P5604-31
- UPC: 785247560448
- Material: Glass, Metal
- Finish: Black
- Style: Traditional
- Room Type: Outdoor
- Light Fixture Form: Wall
- Light Source: Incandescent
- Number of Light Sources: 1
- Wattage: 100 watts (Max)
- Bulb Base: E26 (Medium)
- Voltage: 120 Volts
- Item Dimensions (L x W x H): 8.5"L x 6"W x 8.5"H
- Item Weight: 1.5 Pounds
- Water Resistance Level: Water Resistant
- Installation Type: Wall Mount
Warranty and Support
Warranty Information
This Progress Lighting fixture is covered by a 1-year limited manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or visit the official Progress Lighting website for support details.
Online Resources: Progress Lighting Store on Amazon
