Rev-A-Shelf Tray Divider with Clips

Introduction

The Rev-A-Shelf Model 597 Tray Divider is designed to organize kitchen cabinets by providing dedicated storage for items such as serving dishes, baking sheets, cake pans, and cutting boards. This manual provides instructions for proper installation and maintenance to ensure optimal use and longevity of your product.

Product Features

• Practical solution for organizing serving dishes, cake pans, lids, and more.
• Durable white metal construction.
• Includes four screw-in clips and fasteners for secure installation.
• Optimizes cabinet space by allowing vertical storage.

An image showing the Rev-A-Shelf 12-inch white metal tray divider, highlighting its simple design and the included mounting clips.

Package Contents

• 1 x Rev-A-Shelf Tray Divider (12-inch, White Metal)
• 4 x Screw-in Clips
• Fasteners (screws)

Safety Information

• Always ensure the mounting surface is stable and capable of supporting the divider and its contents.
• Use appropriate tools for installation. Wear safety glasses to protect eyes from debris.
• Keep small parts and fasteners away from children.
• Do not overload the divider, as this may compromise its stability and cause damage to the cabinet.

Setup and Installation

Tools Required: Phillips head screwdriver, measuring tape, pencil.

1. Step 1: Select Location. Choose a suitable location within your cabinet where you wish to install the tray divider. Ensure there is adequate clearance for the items you intend to store.
2. Step 2: Mark Mounting Points. Position the tray divider in the desired location. Use a pencil to mark the positions for the four screw-in clips on the cabinet surface. Ensure the marks are level and evenly spaced for stability.
3. Step 3: Attach Clips. Align each screw-in clip with the marked points. Securely fasten each clip to the cabinet surface using the provided fasteners and a Phillips head screwdriver. Do not overtighten.
4. Step 4: Insert Tray Divider. Once all four clips are securely installed, slide the Rev-A-Shelf Tray Divider into the clips. Ensure it is firmly seated and stable.
5. Step 5: Verify Stability. Gently test the divider to ensure it is securely mounted and does not wobble. Adjust clips or re-tighten screws if necessary.

Operating Instructions

Place serving dishes, baking sheets, cutting boards, and other flat items vertically between the divider sections for organized storage. This allows for easy access and prevents items from stacking and shifting, reducing clutter and potential damage.

Maintenance

• Regularly wipe the tray divider with a soft, damp cloth to remove dust and debris.
• Avoid abrasive cleaners or harsh chemicals, as these may damage the finish.
• Ensure all fasteners remain tight; re-tighten if any looseness is detected to maintain stability.

Troubleshooting

• Issue: Divider is not stable after installation.
  Solution: Ensure all four screw-in clips are securely fastened to the cabinet surface. Check that the divider is fully seated within the clips. Re-tighten screws if necessary.
• Issue: Items do not fit between dividers.
  Solution: The Rev-A-Shelf Tray Divider is designed for standard kitchen items. Ensure the items you are storing are compatible with the divider's dimensions. Consider purchasing additional dividers for more sections if needed.

Specifications

Warranty and Support

Warranty Information: Specific warranty details are not provided in this manual. Please refer to the manufacturer's official website or contact customer support for warranty terms and conditions.

Customer Support: For further assistance, technical support, or to inquire about replacement parts, please visit the Rev-A-Shelf official website or contact their customer service department.