Introduction
This manual provides detailed instructions for the operation and maintenance of your Cooper-Atkins TC6-0-8 Digital Timer, Clock, and Stopwatch. This versatile device is designed for various timing needs, offering functionality as a timer, clock, and stopwatch within a splash-proof case.
Figure 1: Front view of the Cooper-Atkins TC6-0-8 Digital Timer. The display shows '0:00:00' and the buttons are clearly visible.
Key Features
- Multi-functional Device: Operates as a digital timer, clock, and stopwatch to suit diverse timing requirements.
- Audible Alarm: Features an 85-decibel alarm to clearly signal when the set time has been reached.
- Memory Function: Includes an integrated memory feature for recalling previously set time and temperature settings, enhancing user convenience.
- Clear Display: Equipped with a large LCD screen that provides bold and clear number visibility from a distance.
- Durable Construction: Housed in a protective splash-proof case designed to withstand moisture and general wear in demanding environments.
- Versatile Mounting Options: Offers multiple placement options including a belt clip, easel stand, wire hanger, and magnet for flexible use.
Figure 2: The TC6-0-8 timer offers flexible placement with its belt clip, easel stand, wire hanger, and magnet.
Setup
1. Battery Installation
The Cooper-Atkins TC6-0-8 timer requires one AAA battery (included).
- Locate the battery compartment on the back of the unit.
- Slide the battery compartment cover open.
- Insert one AAA battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 3: Rear view of the TC6-0-8, highlighting the battery compartment and mode switch.
2. Selecting Operating Mode (Clock/Timer)
On the back of the unit, there is a slide switch to select between Clock mode and Timer/Stopwatch mode.
- Slide the switch to the clock icon for Clock mode.
- Slide the switch to the hourglass icon for Timer/Stopwatch mode.
Operating Instructions
1. Setting the Clock
Ensure the mode switch on the back is set to the clock icon.
- Press the HOUR button to set the hour.
- Press the MIN button to set the minute.
- Press the SEC button to set the second (usually resets to 00).
- The clock will start automatically.
2. Using the Timer (Countdown)
Ensure the mode switch on the back is set to the hourglass icon.
- Press the HOUR button to set the desired hours.
- Press the MIN button to set the desired minutes.
- Press the SEC button to set the desired seconds.
- Press START/STOP to begin the countdown.
- To pause the timer, press START/STOP again. Press it once more to resume.
- When the timer reaches zero, an 85-decibel alarm will sound. Press any button to silence the alarm.
- To clear the timer setting, press the CLEAR button.
3. Using the Stopwatch (Count-up)
Ensure the mode switch on the back is set to the hourglass icon.
- Ensure the display shows '0:00:00'. If not, press CLEAR.
- Press START/STOP to begin counting up.
- To pause the stopwatch, press START/STOP again. Press it once more to resume.
- To reset the stopwatch to zero, press CLEAR while the stopwatch is stopped.
4. Memory Function
The TC6-0-8 can recall the last timer setting.
- After a countdown timer finishes or is stopped, press the MEM button. The last set time will reappear on the display.
- Press START/STOP to restart the countdown with the recalled time.
Figure 4: The TC6-0-8 timer in use, demonstrating its magnetic attachment and clear display during a countdown.
Maintenance
- Cleaning: Wipe the unit with a damp cloth. Do not use abrasive cleaners or immerse the unit in water. The splash-proof case protects against splashes, but it is not waterproof.
- Battery Replacement: Replace the AAA battery when the display becomes dim or the unit stops functioning. Always dispose of used batteries responsibly.
- Storage: Store the timer in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead battery. | Replace the AAA battery. Ensure correct polarity. |
| Alarm is too quiet. | Obstruction over the speaker, or unit defect. | Ensure the speaker opening on the back is clear. If the issue persists, contact customer support. |
| Timer/Stopwatch not responding. | Incorrect mode selected, or unit malfunction. | Check the mode switch on the back. Ensure it is set to the hourglass icon for timer/stopwatch functions. If still unresponsive, try replacing the battery. |
| Cannot set time/timer. | Incorrect mode selected. | Verify the mode switch on the back is set to the appropriate icon (clock for clock setting, hourglass for timer setting). |
Specifications
- Model: TC6-0-8
- Brand: Cooper-Atkins
- Functions: Timer, Clock, Stopwatch
- Color: Silver
- Material: Plastic
- Product Dimensions: 2.75" (Depth) x 1.13" (Width) x 2.38" (Height)
- Item Weight: Approximately 2.17 ounces (0.14 Pounds)
- Alarm Volume: 85 decibels
- Power Source: 1 x AAA battery (included)
- UPC: 070131060808
Figure 5: Product dimensions of the TC6-0-8 timer.
Warranty Information
For specific warranty details regarding your Cooper-Atkins TC6-0-8 Digital Timer, please refer to the warranty card included with your purchase or visit the official Cooper-Atkins website. Warranty coverage typically addresses manufacturing defects under normal use.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact Cooper-Atkins customer support.
- Website: www.cooper-atkins.com
- Contact Information: Refer to the website for the most current contact details, including phone numbers and email support.
