MXL-V69-CABLE1 Mogami 7-Pin XLR Microphone Cable Instruction Manual

1. Product Overview

The MXL-V69-CABLE1 is a high-quality 7-pin XLR microphone cable, specifically designed for use with MXL tube microphones and their associated power supplies. Manufactured by Mogami, this cable ensures optimal audio signal integrity and durability for professional audio applications. Its 15-foot (4.57m) length provides ample reach for studio and stage setups.

Figure 1: The MXL-V69-CABLE1 Mogami 7-Pin XLR Microphone Cable, coiled for storage, showcasing its male and female connectors.

2. Key Features

• 7-Pin XLR Connectors: Equipped with male and female 7-pin XLR connectors for specialized microphone and power supply connections.
• Mogami Cable Quality: Utilizes Mogami cable, known for its high-quality construction and superior signal transmission.
• Optimal Length: Features a total length of 15 feet (4.57 meters) for versatile placement.
• Durable Construction: Designed for robust performance in professional environments.
• Compatibility: Specifically designed for use with MXL tube microphones and their power supplies.

Figure 2: A detailed view of the 7-pin male and female XLR connectors, highlighting their pin configuration.

3. Setup Instructions

1. Identify Connectors: Locate the male (pins) and female (holes) 7-pin XLR connectors on your MXL-V69-CABLE1 cable.
2. Connect to Microphone: Carefully align the female end of the cable with the male 7-pin XLR output on your MXL tube microphone. Push firmly until it clicks into place.
3. Connect to Power Supply: Align the male end of the cable with the female 7-pin XLR input on your MXL tube microphone power supply. Push firmly until it clicks into place.
4. Secure Connections: Ensure both connections are secure and fully seated to prevent signal loss or intermittent audio.

4. Operating Guidelines

• Always ensure the microphone and power supply are powered off before connecting or disconnecting the cable.
• Avoid excessive bending or kinking of the cable, as this can damage internal wiring and affect performance.
• Route cables away from sources of electromagnetic interference (EMI) such as power cables, transformers, and fluorescent lights to prevent noise.
• Do not pull the cable by the wire itself; always grasp the connector firmly when plugging or unplugging.

5. Care and Maintenance

• Cleaning: Use a soft, dry cloth to clean the cable and connectors. Avoid liquid cleaners or solvents.
• Storage: When not in use, coil the cable loosely to prevent kinks and tangles. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the jacket or connectors. Replace if significant damage is found.

6. Troubleshooting

• No Audio Signal:
  • Ensure both ends of the cable are securely connected to the microphone and power supply.
  • Verify that the microphone and power supply are correctly powered on.
  • Check other components in your audio chain (e.g., mixer, interface) for proper settings and connections.
• Intermittent Audio:
  • Check for loose connections at either end of the cable.
  • Inspect the cable for visible damage or kinks that might indicate internal wire breakage.
• Hum or Buzzing Noise:
  • Ensure the cable is routed away from power cables and other sources of electromagnetic interference.
  • Verify that all equipment is properly grounded.
  • Test with a different cable to rule out a faulty cable.

7. Technical Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the official MXL website or contact their customer service directly. Keep your proof of purchase for any warranty claims.