1. Introduction
This manual provides essential information for the safe and effective use of your Satco S3240 75 Watt BR30 Incandescent Light Bulb. Please read these instructions carefully before installation and operation. Retain this manual for future reference.
Safety Information
- Ensure power is turned off at the circuit breaker before installing or replacing the bulb.
- Do not exceed the maximum wattage rating of your fixture.
- Allow the bulb to cool completely before handling.
- This bulb is designed for indoor use.
- Dispose of used bulbs according to local regulations.
2. Product Overview
The Satco S3240 is a 75-watt BR30 incandescent light bulb featuring a red finish and a medium (E26) base. It operates at 130 volts and is designed to provide colored illumination for various indoor applications.
Image: The Satco S3240 75 Watt BR30 Incandescent Light Bulb, featuring a red-colored dome and a standard medium screw base.
Key Features
- Wattage: 75 Watts
- Bulb Shape: BR30 reflector type
- Base Type: Medium (E26)
- Color: Red finish
- Voltage: 130 Volts
- Average Rated Hours: Approximately 2000 hours
3. Setup
Installation Instructions
- Turn off Power: Before beginning installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
- Prepare Fixture: If replacing an existing bulb, carefully unscrew the old bulb from the socket. Allow it to cool if it was recently in use.
- Install New Bulb: Gently screw the Satco S3240 bulb into the medium (E26) base socket. Turn clockwise until it is finger-tight. Do not overtighten.
- Restore Power: Once the bulb is securely installed, restore power to the fixture at the circuit breaker.
- Test: Turn on the light switch to confirm proper operation.
4. Operation
The Satco S3240 incandescent light bulb operates like a standard light bulb. Once installed in a compatible fixture and power is supplied, it will illuminate when the light switch is turned to the 'ON' position.
Intended Use
This bulb is suitable for general illumination and decorative purposes where a red light output is desired. Common applications include recessed lighting, track lighting, and floodlights in indoor environments.
5. Maintenance
Cleaning
To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the bulb's finish or electrical components.
Replacement
When the bulb reaches the end of its life, it will cease to illuminate. To replace, follow the installation instructions in Section 3, ensuring power is off before handling.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to fixture. | Check circuit breaker or wall switch. |
| Bulb not screwed in properly. | Turn off power, then re-screw bulb firmly into socket. | |
| Bulb has reached end of life. | Replace bulb with a new one. | |
| Bulb flickers. | Loose connection. | Turn off power, then re-screw bulb firmly. |
| Incompatible dimmer switch. | Ensure dimmer is compatible with incandescent bulbs. |
7. Specifications
| Attribute | Value |
|---|---|
| Brand | Satco |
| Model Name | S3240 |
| Light Type | Incandescent |
| Wattage | 75 Watts |
| Bulb Shape Size | BR30 |
| Bulb Base | E26 Medium |
| Voltage | 130 Volts |
| Light Color | Red |
| Color Temperature | 2000 Kelvin |
| Average Life | 2000 Hours (approx. 83.33 Days continuous use) |
| Material | Glass |
| Product Dimensions | 3.75"W x 5.38"H (approx.) |
| Item Weight | 3.2 ounces |
| Indoor/Outdoor Usage | Indoor |
| UPC | 045923032400 |
8. Warranty and Support
Warranty Information
This product comes with an average rated hour limited warranty. For specific details regarding warranty coverage and claims, please refer to the documentation provided at the time of purchase or contact Satco customer service.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Satco customer support. Visit the official Satco website for contact information or refer to your product packaging.
