1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of the Leviton Vizia Fluorescent Dimmer, Model 000-VZH08-1LX. Please read all instructions carefully before beginning installation or use to ensure proper function and to prevent potential hazards.
Important Safety Information
- WARNING: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring.
- This device is intended for installation in accordance with the National Electrical Code and local regulations.
- Consult a qualified electrician if you are unsure about any part of these instructions.
- Do not use with standard incandescent or LED loads. This dimmer is specifically designed for fluorescent lighting.
2. Product Features
The Leviton Vizia Fluorescent Dimmer offers advanced control and aesthetic integration for your lighting system. Key features include:
- Universal Design: Provides crisp actuation and minimal travel of the push pad.
- Digital Circuitry: Enables aesthetically pleasing soft-on and fade-off lighting transitions.
- Flexible Control: Supports single-pole, three-way, or multi-location dimming control.
- Adjustable Settings: Easy adjustments for minimum brightness level, dim-lock, and selectable fade rate.
- LED Indicator: A green LED indicates load status and functions as a locator light.
- Installation Convenience: Terminal screws are designed for both back- and side-wire connections.
- Aesthetic Compatibility: Compatible with Decora standard and screwless wall plates.
- Durability: Commercial grade construction with a 5-Year Limited Warranty.
3. Installation and Setup
Proper installation is crucial for the safe and effective operation of your dimmer. It is recommended that installation be performed by a qualified electrician.
Wiring Instructions
- Turn Off Power: Before starting, ensure power is OFF at the circuit breaker or fuse box.
- Identify Wiring: Carefully identify the LINE (hot), LOAD, and GROUND wires in your electrical box. For three-way or multi-location setups, identify the TRAVELER wires.
- Connect Wires: Connect the dimmer wires to the corresponding house wires using appropriate wire connectors. The dimmer features both back-wire and side-wire terminal screws for easier installation. Ensure all connections are secure.
- Mount Dimmer: Gently fold wires into the wall box and secure the dimmer to the wall box with the provided screws.
- Install Wall Plate: Attach a compatible Decora standard or screwless wall plate (sold separately).
- Restore Power: Turn power back ON at the circuit breaker.
Configuration for Multi-Location Control
This dimmer can be used in single-pole, three-way, or multi-location applications. Refer to the specific wiring diagrams provided with your dimmer packaging for detailed instructions on multi-location setups. Multiple remotes are available for extended multi-location control.
4. Operation
The Leviton Vizia Fluorescent Dimmer is designed for intuitive control of your fluorescent lighting.
Basic On/Off and Dimming
- Turn On/Off: Press the large push pad to turn the lights ON or OFF. The push pad returns to a neutral position regardless of the load status.
- Adjust Brightness: Use the small rocker switch on the side of the push pad to increase or decrease the light level. Press the top of the rocker to brighten, and the bottom to dim.
- Green LED: The green LED on the dimmer indicates the current load status and also serves as a locator light in the dark.
Advanced Adjustments
The dimmer allows for easy adjustments to customize your lighting experience:
- Minimum Brightness Level: Adjust the lowest light level to prevent flickering or premature lamp failure with certain fluorescent ballasts.
- Dim-Lock: This feature allows you to set a maximum dimming level, preventing lights from being dimmed below a desired point.
- Selectable Fade Rate: Customize the speed at which lights turn on (soft-on) and turn off (fade-off).
Refer to the detailed instructions included with your dimmer for specific steps on how to access and adjust these advanced settings.
5. Maintenance
The Leviton Vizia Fluorescent Dimmer is designed for long-lasting performance with minimal maintenance.
- Cleaning: To clean the dimmer, wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- No User-Serviceable Parts: There are no user-serviceable parts inside the dimmer. Do not attempt to open or repair the unit.
6. Troubleshooting
If you experience issues with your Leviton Vizia Fluorescent Dimmer, refer to the following common troubleshooting steps:
- Lights Do Not Turn On:
- Check that the circuit breaker is ON.
- Verify all wiring connections are secure and correct.
- Ensure the dimmer is compatible with your fluorescent ballast.
- Lights Do Not Dim Properly:
- Confirm the dimmer is rated for your fluorescent load.
- Adjust the minimum brightness level setting (refer to advanced adjustments in Section 4).
- Check for loose wiring connections.
- Flickering Lights:
- Adjust the minimum brightness level setting.
- Ensure the fluorescent lamps and ballasts are compatible with dimming.
If problems persist after attempting these steps, contact Leviton Technical Support for assistance.
7. Specifications
| Specification | Value |
|---|---|
| Model Number | 000-VZH08-1LX |
| Operation Mode | ON-OFF |
| Current Rating | 8 Amps |
| Operating Voltage | 120 Volts |
| Connector Type | Screws |
| Terminal | Screwless |
| Actuator Type | Push Button |
| International Protection Rating | IP00 |
| Connectivity Protocol | X-10 |
| Item Weight | 6.6 ounces |
| Product Dimensions | 2 x 2 x 0.5 inches |
| UPC | 078477290347 |
8. Warranty and Support
Warranty Information
The Leviton Vizia Fluorescent Dimmer (Model 000-VZH08-1LX) is backed by a Five Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the documentation included with your product or visit the official Leviton website.
Technical Support
For technical assistance, wiring questions, or troubleshooting beyond the scope of this manual, please contact Leviton Customer Service or visit their support website. Contact information can typically be found on the product packaging or the official Leviton website.
