Westek SW103CTC-4

Download PDF
Contents

Westek SW103CTC-4 Swivel Mount Light Control User Manual

Model: SW103CTC-4 | Brand: Westek

Introduction

The Westek SW103CTC-4 Swivel Mount Light Control is designed to automate outdoor lighting by sensing ambient light levels. This device automatically turns lights on at dusk and off at dawn, providing convenience and energy efficiency. It features an aimable sensor and is compatible with various bulb types, including LED, incandescent, fluorescent, mercury vapor, and sodium bulbs.

Key Features

  • Automatic Nightlight Control: Ideal for hallways, laundry rooms, garages, basements, attics, and outdoor spaces.
  • Dusk-to-Dawn Activation: Automatically activates lights in low light conditions and deactivates them at dawn.
  • Versatile Compatibility: Works with LED, incandescent, fluorescent, mercury vapor, and sodium bulbs.
  • Swivel Sensor: Allows for optimal positioning of the photocell light sensor.
  • Weather-Resistant Housing: Designed for outdoor use in various conditions.
  • Easy Installation: Connects directly to an electrical box with a standard 1/2-inch pipe thread and 6-inch pre-stripped leads.

Product Overview

The Westek SW103CTC-4 is a compact photoelectric switch designed for outdoor lighting control. It consists of a sensor unit with a swivel mount and wiring leads for electrical connection.

Westek SW103CTC-4 Swivel Mount Light Control

Figure 1: Westek SW103CTC-4 Swivel Mount Light Control. This image shows the light control unit with its wiring leads (red, black, white) and the swivel base for mounting. The photocell sensor is visible at the top.

Westek SW103CTC-4 with labeled components

Figure 2: Labeled components of the Westek SW103CTC-4. This diagram highlights the photocell light sensor, the swivel adjustment for optimal light positioning, and the weather-proof housing. It also indicates compatibility with LED, incandescent, fluorescent, and halogen bulb sockets.

Setup and Installation

WARNING: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electrical shock.

  1. Power Disconnection: Turn off the power to the circuit at the main electrical panel before starting any work.
  2. Mounting Location: Select a mounting location that allows the photocell sensor to receive natural light without obstruction from artificial light sources (e.g., the light it controls, streetlights) at night. The swivel feature allows for aiming the sensor away from such interference.
  3. Prepare Electrical Box: The unit connects directly to an electrical box using a standard 1/2-inch pipe thread. Ensure the electrical box is properly installed and secured.
  4. Wiring Connections:
    • Connect the black wire from the light control to the incoming hot (line) wire from the power source.
    • Connect the red wire from the light control to the hot (load) wire of the light fixture.
    • Connect the white wire from the light control to the neutral wire from the power source and the light fixture.
    • Secure all connections with appropriate wire nuts.
  5. Secure the Unit: Thread the light control unit into the electrical box opening and secure it with the provided nut.
  6. Adjust Sensor Position: Utilize the swivel feature to aim the photocell sensor towards an area that receives natural light and is not affected by the controlled light fixture or other artificial light at night.
  7. Restore Power: Once all connections are secure and the unit is mounted, restore power at the circuit breaker.

Video 1: Westek Outdoor Swivel Light Control with Photocell Sensor. This video demonstrates the features and potential installation scenarios for the Westek outdoor swivel light control, highlighting its automatic dusk-to-dawn functionality and swivel sensor for optimal light positioning.

Operating Instructions

The Westek SW103CTC-4 operates automatically based on ambient light levels. No manual intervention is typically required after installation.

  • Dusk Activation: As natural light diminishes at dusk, the photocell sensor will detect the reduced light level and automatically turn on the connected light fixture.
  • Dawn Deactivation: As natural light increases at dawn, the photocell sensor will detect the increased light level and automatically turn off the connected light fixture.
  • Initial Delay: Upon initial power-up or after a power outage, the unit may have a brief delay (a few minutes) before it begins normal operation. This is a standard function to prevent false triggers.

Maintenance

The Westek SW103CTC-4 requires minimal maintenance.

  • Sensor Cleaning: Periodically inspect the photocell sensor for dirt, dust, or debris accumulation. Gently wipe the sensor lens with a soft, clean cloth to ensure accurate light detection.
  • Environmental Factors: Ensure that no new obstructions (e.g., growing foliage, new structures) block natural light from reaching the sensor or that new artificial light sources interfere with its operation.
  • Wiring Integrity: Occasionally check the wiring connections for any signs of wear or corrosion, especially in harsh outdoor environments.

Troubleshooting

ProblemPossible CauseSolution
Light stays on during the day.
  • Sensor is obstructed or dirty.
  • Sensor is exposed to artificial light at night (e.g., from the controlled fixture, streetlights).
  • Faulty unit.
  • Clean the sensor lens.
  • Adjust the swivel mount to aim the sensor away from artificial light sources.
  • Relocate the unit if necessary.
  • If issues persist, the unit may need replacement.
Light does not turn on at night.
  • No power to the unit.
  • Loose wiring connections.
  • Bulb is burnt out or incompatible.
  • Sensor is receiving too much ambient light.
  • Faulty unit.
  • Check circuit breaker.
  • Verify all wiring connections are secure (ensure power is off first).
  • Replace the bulb or ensure it is compatible.
  • Adjust sensor position to ensure it detects darkness.
  • If issues persist, the unit may need replacement.
Light flickers or turns on/off intermittently.
  • Sensor is in a borderline light condition (e.g., partial shade, fluctuating light).
  • Loose wiring.
  • Water intrusion (for outdoor units).
  • Adjust sensor position to a more consistent light environment.
  • Check and secure wiring connections (ensure power is off first).
  • Inspect for water damage; ensure proper sealing during installation.

Specifications

FeatureDetail
BrandWestek
Model NumberSW103CTC-4
Voltage120 Volts
Maximum Tungsten Wattage1800W
Maximum Ballast Wattage1100VA
Frequency50/60 Hz
CompatibilityLED, Incandescent, Fluorescent, Mercury Vapor, Sodium Bulbs
Installation TypeSurface Mount, 1/2" Pipe Thread
Indoor/Outdoor UsageOutdoor
MaterialPlastic
Product Dimensions6.75"L x 3.75"W x 1.25"H
Item Weight0.01 Ounces
CertificationsUL Listed

Warranty and Support

The product includes a warranty. For specific warranty details and customer support, please refer to the documentation included with your purchase or visit the official Westek website. Contact information for support is typically available on the manufacturer's product packaging or website.

© 2025 Westek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.