Global Industrial Black 5-Way Adjustable Ergonomic Stool Instruction Manual

Product Overview

The Global Industrial Black 5-Way Adjustable Ergonomic Stool is designed for comfortable and extended sitting periods in various work environments. Its robust construction and ergonomic features aim to reduce fatigue and support proper posture.

Key features include:

• Built to offer comfortable seating in any office or shop environment.
• Features a sturdy steel frame and soft, textured polyurethane seat & back rest material that is resistant to wear & punctures, providing a long service life.
• 38" to 48-1/2" back height adjustment.
• 22" to 32-1/2" pneumatic seat height adjustment.
• Five sets of 2" hooded dual-wheel swivel casters for easy mobility.

Image: The Global Industrial Black 5-Way Adjustable Ergonomic Stool positioned at a desk in an office environment, showcasing its design and typical use case.

Safety Information

Please read and understand all safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.

• Maximum weight capacity: 225 lbs. Do not exceed this weight limit.
• Ensure the stool is stable before use.
• Do not move or tip the chair while seated.
• Follow all assembly instructions carefully to ensure safe operation.

Setup and Assembly

This stool requires assembly. An assembly guide is included with the product. Please ensure all components are present before beginning assembly.

Required Tools:

• No special tools are typically required for basic assembly, as necessary tools are usually provided or components are designed for hand-tightening.

Assembly Steps:

1. Unpack all components and verify against the parts list in the included assembly guide.
2. Attach the casters or glides to the 5-blade base.
3. Insert the pneumatic cylinder into the center of the base.
4. Slide the foot ring onto the pneumatic cylinder and secure it at the desired height.
5. Attach the seat plate mechanism to the underside of the seat.
6. Mount the backrest support to the seat plate mechanism.
7. Attach the backrest to its support.
8. Place the assembled seat and backrest onto the pneumatic cylinder.
9. Ensure all connections are secure before use.

Operating Instructions

The stool features 5-way adjustability to customize your seating experience for optimal comfort and support.

Adjustments:

• Pneumatic Seat Height Adjustment: Use the lever located under the seat to raise or lower the seat height. The seat height can be adjusted from 22" to 32-1/2".
• Back Height Adjustment: Adjust the backrest vertically from 38" to 48-1/2" to support your lumbar region.
• Back Depth Range Adjustment: Adjust the backrest forward or backward by 2" to find the ideal depth.
• Independent Seat and Back Tilt Adjustment: Utilize the separate levers to adjust the angle of the seat and backrest independently for personalized comfort.
• Foot Ring Adjustment: The 360-degree chrome foot ring is height adjustable. Loosen the knob on the foot ring to slide it up or down the pneumatic cylinder, then tighten to secure.

Image: A diagram illustrating the key dimensions of the Global Industrial Black 5-Way Adjustable Ergonomic Stool, including seat width, depth, and overall height range.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your ergonomic stool.

• Cleaning: The self-skinned polyurethane upholstery is easy to clean. Wipe clean with a damp cloth and mild soap. Avoid abrasive cleaners or solvents that may damage the material.
• Inspection: Periodically check all bolts, screws, and connections to ensure they are tight. Re-tighten if necessary.
• Casters/Glides: Keep casters free of debris to ensure smooth movement. If using glides, ensure they are not worn down.

Troubleshooting

If you encounter issues with your stool, refer to the following common problems and solutions:

• Stool does not adjust height:
  • Ensure the pneumatic cylinder is correctly installed and the lever is fully engaged.
  • Check for any obstructions preventing the cylinder from moving freely.
• Stool is wobbly:
  • Verify that all assembly bolts and screws are securely tightened.
  • Ensure the casters or glides are properly inserted into the base.
• Backrest slides down:
  • Tighten the knob or lever that secures the backrest height adjustment.

Specifications

Warranty Information

This Global Industrial Ergonomic Stool is covered by a 1 Year Limited Warranty.

For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your product or contact Global Industrial customer support.

Customer Support

If you have any questions, require assistance with assembly, or need to report a missing part or defect, please contact Global Industrial customer support.

Please have your model number (250626) and purchase information ready when contacting support.

For the most current contact information, please visit the official Global Industrial website or refer to the documentation provided with your purchase.