Brennenstuhl OL 02

Brennenstuhl LED Orientation Night Light OL 02

Model: 1507220

Introduction

The Brennenstuhl LED Orientation Night Light OL 02 is designed to provide soft, unobtrusive illumination in dark environments. Featuring a built-in twilight sensor and two energy-efficient LEDs, this night light automatically activates when ambient light levels are low, offering enhanced safety and comfort in areas like hallways, bedrooms, or nurseries. Its compact design and low power consumption make it an ideal solution for continuous, long-term use.

Safety Instructions

  • Indoor Use Only: This device is intended for indoor use in dry locations. Do not expose to moisture or water.
  • Electrical Safety: Ensure the wall socket is in good condition and properly grounded. Do not overload the socket.
  • Cleaning: Disconnect from power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosols.
  • Disassembly: Do not attempt to open or repair the device. Refer all servicing to qualified personnel.
  • Children: Keep out of reach of small children. This is not a toy.

Product Features

  • Twilight Sensor: Automatically turns the light on when it's dark and off when it's bright.
  • Energy Efficient: Equipped with 2 LEDs for extremely low power consumption and long operational life.
  • Soft Illumination: Provides a gentle, non-disruptive light suitable for orientation without disturbing sleep.
  • Compact Design: Plugs directly into a standard EU socket without obstructing adjacent outlets.
  • Durable Material: Constructed from robust plastic for lasting performance.

Setup

  1. Unpack: Carefully remove the night light from its packaging.
  2. Select Location: Choose an indoor wall socket in an area where soft orientation lighting is desired, such as a hallway, bedroom, or child's room. Ensure the socket is not covered by furniture or curtains, which could block the twilight sensor.
  3. Plug In: Insert the night light directly into a standard F-type (2-pin EU German) wall socket. Ensure it is securely seated.
Brennenstuhl LED Orientation Night Light OL 02 plugged into a wall socket.
Image: The Brennenstuhl LED Orientation Night Light OL 02, ready to be plugged into a wall socket. This shows the front of the device with the light panel and sensor.

Operating Instructions

The Brennenstuhl LED Orientation Night Light OL 02 operates automatically using its integrated twilight sensor.

  • Automatic Activation: Once plugged in, the night light will automatically turn on when the ambient light in the room falls below a certain threshold (i.e., when it gets dark).
  • Automatic Deactivation: The light will automatically turn off when sufficient ambient light is detected (i.e., when it gets bright).
  • No Manual Control: There are no manual switches or controls on this device. Its operation is entirely automatic based on light conditions.
Brennenstuhl LED Orientation Night Light OL 02 illuminating a child's room at night.
Image: The night light plugged into a wall socket, providing soft illumination in a dark room where a child is sleeping. This demonstrates its function in a typical usage scenario.

Maintenance

  • Cleaning: To clean the device, first unplug it from the wall socket. Use a soft, dry, lint-free cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the device or interfere with the sensor.
  • No User-Serviceable Parts: The LED bulbs are integrated and not replaceable by the user. The device does not require any internal maintenance.
  • Storage: If storing the device for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on in darkness.
  • Insufficient darkness in the room.
  • Sensor is obstructed.
  • Power outage or loose connection.
  • Ensure the room is sufficiently dark for the sensor to activate.
  • Check that the sensor (small clear dome on the front) is not covered by furniture, curtains, or other objects.
  • Verify the wall socket has power and the night light is securely plugged in. Try another socket.
Light stays on during the day.
  • Room is not bright enough.
  • Sensor is obstructed.
  • Ensure the room receives adequate ambient light during the day.
  • Check that the sensor is not covered, making it perceive continuous darkness.
Light flickers or is dim.
  • Unstable power supply.
  • Device malfunction.
  • Try plugging the light into a different wall socket to rule out power supply issues.
  • If the problem persists, the device may be faulty. Discontinue use and contact customer support.

Specifications

BrandBrennenstuhl
Model Number1507220 (OL 02)
Dimensions (L x W x H)8 x 5.5 x 10.2 cm
Weight49 grams
Number of LEDs2
ColorWhite
MaterialPlastic
Special FeaturesTwilight Sensor, Lightweight
UsageIndoor Use Only
Plug TypeF - 2 pin EU German
Light TypeLED Night Light
Energy LabelE
Country of OriginChina

Warranty and Support

Brennenstuhl products are manufactured to high-quality standards. For any questions regarding your Brennenstuhl LED Orientation Night Light OL 02, or for support with potential defects, please contact Brennenstuhl customer service or the retailer from whom you purchased the product. Information regarding spare parts availability is not provided for this item.

Please refer to the official Brennenstuhl website or your purchase documentation for specific warranty terms and contact details.

© 2024 Brennenstuhl. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.