Introduction
This manual provides instructions for the installation, operation, and maintenance of your Intel 60188-001 SKT-775 Active Copper Core CPU Cooler. This cooler is designed to provide efficient cooling for Intel Socket 775 CPUs, including Intel Core 2 Duo E6700 (2.66 GHz) and Intel XEON 3XXX processors.
Important Safety Information
- Always disconnect power from your computer before installing or removing any internal components.
- Handle the CPU cooler and motherboard with care to avoid damage to sensitive components.
- Be aware of static electricity. Consider using an anti-static wrist strap when handling computer components.
- Keep small parts away from children.
Package Contents
Verify that all components are present before installation:
- Intel 60188-001 SKT-775 Active Copper Core CPU Cooler (Heatsink and Fan assembly)
- Pre-applied thermal paste (typically included on new coolers)
Setup and Installation
Pre-Installation Checklist
- Ensure your motherboard supports an LGA775 socket.
- Gather necessary tools (e.g., cleaning alcohol and lint-free cloth if reapplying thermal paste).
- Ensure the CPU is correctly seated in the socket.
Installation Steps
- Prepare the CPU and Motherboard: Ensure the CPU surface is clean and free of dust or old thermal paste. If the cooler does not have pre-applied thermal paste, apply a small amount of high-quality thermal paste to the center of the CPU's integrated heat spreader (IHS).
- Position the Cooler: Carefully align the four push-pin fasteners on the cooler with the corresponding holes around the CPU socket on the motherboard. Ensure the fan cable is oriented correctly for connection to the motherboard's CPU fan header.
- Secure the Cooler: Press down firmly on each of the four push-pin fasteners in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until they click into place. You should feel and hear a click as each pin locks. Verify that all four pins are securely fastened and the cooler is stable.
- Connect the Fan Power Cable: Locate the 4-pin CPU fan header on your motherboard. Connect the cooler's 4-pin power cable to this header. Ensure the connector is fully seated.
- Final Check: Double-check all connections and ensure no cables are obstructing the fan blades or other components.
Operating Instructions
Once installed and connected, the Intel 60188-001 CPU Cooler operates automatically. The fan speed is typically controlled by the motherboard's BIOS/UEFI based on CPU temperature, ensuring optimal cooling performance and noise levels.
- Monitor CPU temperatures using system monitoring software to ensure proper cooling.
- Ensure adequate airflow within your computer case for efficient heat dissipation.
Maintenance
- Dust Removal: Periodically (e.g., every 3-6 months), inspect the heatsink fins and fan blades for dust accumulation. Use compressed air to gently blow dust out of the heatsink fins. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the fan motor.
- Thermal Paste: If CPU temperatures rise significantly over time, consider reapplying thermal paste. This involves carefully removing the cooler, cleaning off old thermal paste from both the CPU and cooler base, and applying new thermal paste before reinstallation.
Troubleshooting
- Fan Not Spinning
- Check if the 4-pin power cable is securely connected to the motherboard's CPU fan header. Ensure the system is powered on. If the fan still does not spin, it may be faulty and require replacement.
- High CPU Temperatures
- Verify that the cooler is securely mounted to the motherboard and all four push-pins are locked. Ensure thermal paste was applied correctly. Check for excessive dust buildup on the heatsink fins. Confirm adequate airflow within the computer case. If issues persist, consider reapplying thermal paste or checking the fan's functionality.
- Unusual Noise from Fan
- Inspect the fan for any obstructions (e.g., loose cables). Clean any dust from the fan blades. If the noise persists, the fan bearings may be worn, indicating a need for replacement.
Technical Specifications
| Feature | Detail |
|---|---|
| Brand | Intel |
| Model | 60188-001 |
| Socket Compatibility | LGA775 |
| Cooling Method | Air |
| Heatsink Material | Aluminum with Copper Core |
| Fan Connector | 4-Pin |
| Voltage | 12 Volts |
| Wattage | 35 watts |
| Compatible CPUs | Intel Core 2 Duo E6700 (2.66 GHz), Intel XEON 3XXX |
| Item Weight | 15.52 ounces |
| Regulatory Approvals | UL, CE |
Warranty and Support
This product is covered by Intel's standard warranty. For warranty claims or technical support, please refer to the official Intel support website or contact your retailer. Keep your proof of purchase for warranty purposes.
