1. Introduction
The ABUS 115/100 Locking Bracket is designed to provide enhanced security for various applications. Constructed from tough 5mm hardened steel, this bracket is suitable for use with padlocks featuring shackles up to 12mm in diameter. Proper installation with heavy-duty coach bolts (not supplied) is crucial for optimal security performance.
2. Product Features
- Hardened Steel Construction: Made from 5mm thick hardened steel for superior strength and resistance.
- Corrosion Resistant: Designed to withstand environmental elements, ensuring long-term durability.
- Padlock Compatibility: Accommodates padlocks with shackle diameters up to 12mm.
- Compact Design: Overall size of 100 x 45 mm, with fixing bases measuring 45mm width and 38mm height.
- Ergonomic Design: Facilitates ease of installation and use.
3. Package Contents
- 1 x ABUS 115/100 Locking Bracket
4. Setup and Installation
The ABUS 115/100 Locking Bracket requires secure mounting to a stable surface. Follow these steps for proper installation:
- Select Location: Choose a suitable, robust surface for mounting the bracket. Ensure the surface can withstand potential force.
- Mark Drilling Points: Position the two parts of the locking bracket on the desired surface. The fixing bases for each part measure 45mm in width and 38mm in height. Mark the locations for the mounting holes.
- Drill Holes: Drill appropriate pilot holes for the heavy-duty coach bolts. Note: Coach bolts are not supplied and must be purchased separately. Ensure the bolt size is compatible with the bracket's mounting holes.
- Secure Bracket: Attach each part of the locking bracket using the heavy-duty coach bolts. Tighten securely to prevent movement.
- Verify Stability: After installation, ensure both parts of the bracket are firmly attached and do not wobble.
Figure 1: Front view of the ABUS 115/100 Locking Bracket, showing the two separate components. Each component features a flat base with square mounting holes and an upright section with a circular padlock eye.
Figure 2: Side view of the ABUS 115/100 Locking Bracket, illustrating how the two upright sections align to form a single point for padlock insertion. The square mounting holes on the base are visible.
5. Operation
Once the ABUS 115/100 Locking Bracket is securely installed, it is ready for use with a compatible padlock.
- Align Components: Ensure the two upright sections of the bracket are perfectly aligned, creating a single opening for the padlock shackle.
- Insert Padlock: Insert the shackle of your padlock through the aligned holes of the bracket. The bracket is designed to accept padlock shackles up to 12mm in diameter.
- Lock Padlock: Close and lock your padlock according to its manufacturer's instructions.
Always ensure the padlock is fully engaged and locked to maintain security.
6. Maintenance
The ABUS 115/100 Locking Bracket is constructed from durable, corrosion-resistant hardened steel, requiring minimal maintenance.
- Regular Inspection: Periodically inspect the bracket for any signs of wear, damage, or loosening of mounting bolts.
- Cleaning: Clean the bracket with a damp cloth to remove dirt or debris. Avoid abrasive cleaners that could damage the finish.
- Lubrication: While the bracket itself does not require lubrication, ensure your padlock is regularly lubricated according to its own instructions to maintain smooth operation.
7. Troubleshooting
- Bracket Not Secure: If the bracket feels loose after installation, re-check the tightness of all coach bolts. Ensure the mounting surface is solid and appropriate for security applications.
- Padlock Does Not Fit: Verify that your padlock's shackle diameter does not exceed 12mm. If it does, a different padlock or bracket may be required.
- Corrosion Appears: Although corrosion-resistant, extreme conditions can affect any metal. Ensure the bracket is kept as dry as possible and consider applying a protective coating if exposed to harsh environments.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | ABUS |
| Model Number | 115/100 (Item model number: 33713) |
| Material | Hardened Steel |
| Special Feature | Anti-Corrosion |
| Lock Type Compatibility | Padlock (shackle up to 12mm diameter) |
| Overall Dimensions (L x W x H) | 3.7 x 2.13 x 6.65 inches (approximate) |
| Fixing Base Dimensions (Width x Height) | 45mm x 38mm per part |
| Steel Thickness | 5mm |
| Item Weight | 9.1 ounces (approx. 0.26 kg) |
| Included Components | Locking bracket (1 piece) |
9. Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts for your ABUS 115/100 Locking Bracket, please refer to the official ABUS website or contact ABUS customer service directly. Keep your purchase receipt as proof of purchase.
ABUS Official Website: www.abus.com
