Product Overview
The Duravit 0067011000 mounting screws and caps are designed for securely fixing floor-standing bidets and toilets. This set provides the necessary hardware for a stable and reliable installation, ensuring your fixture remains firmly in place.
Image: Duravit 0067011000 Mounting Screws and Caps. This image displays the complete set of mounting hardware, including screws and decorative caps, essential for installing floor-mounted bidets and toilets.
Installation Instructions
Follow these steps for proper installation of your floor-mounted bidet or toilet using the Duravit 0067011000 mounting set. Professional installation is recommended.
- Preparation: Ensure the floor surface is clean, level, and structurally sound. Verify that all necessary plumbing connections are in place and accessible.
- Positioning: Carefully position the bidet or toilet onto the desired location, aligning it with the waste outlet and water supply lines. Mark the drilling points through the fixture's mounting holes onto the floor.
- Drilling: Remove the fixture. Using an appropriate drill bit for your floor material (e.g., masonry bit for tile/concrete), drill holes at the marked positions. Ensure the depth and diameter of the holes match the requirements for the mounting screws.
- Insert Anchors (if required): If your floor material requires anchors (e.g., concrete), insert them into the drilled holes.
- Secure Fixture: Reposition the bidet or toilet over the drilled holes. Insert the Duravit mounting screws through the fixture's mounting holes and into the floor or anchors. Tighten the screws evenly and firmly, but do not overtighten, as this can damage the fixture or floor.
- Apply Caps: Once the fixture is securely mounted, place the decorative caps over the screw heads to conceal them and provide a finished appearance.
- Final Checks: Connect water supply and waste lines. Check for stability and leaks.
Usage and Care
Usage
These mounting screws and caps are designed for permanent installation of floor-mounted bidets and toilets. Once installed, they provide a secure and stable base for your sanitary fixture. Ensure the fixture is not subjected to excessive lateral force or impact, which could compromise the mounting integrity.
Care and Maintenance
To maintain the appearance of the caps and the integrity of the mounting, follow these guidelines:
- Cleaning: Clean the decorative caps with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
- Inspection: Periodically check the stability of the bidet or toilet. If any wobbling or looseness is detected, gently retighten the mounting screws. Do not overtighten.
- Damage: If any part of the mounting hardware becomes damaged or corroded, it is recommended to replace the entire set to ensure continued safety and stability.
Specifications
| Feature | Detail |
|---|---|
| Brand | Duravit |
| Model Number | 0067011000 |
| Part Number | 0067011000 |
| Item Weight | 1.28 ounces |
| Product Dimensions | 2.75 x 2.75 x 2 inches |
| Material | Metal (Screws), Brass (Handle Material - likely referring to the cap material or a component within the screw assembly) |
| Finish | Chrome |
| Color | Chrome |
| Head Style | Round |
| Included Components | Screw, Caps |
| Special Features | Easy to Install |
Warranty and Support
Information regarding specific warranty terms for the Duravit 0067011000 mounting screws and caps is not provided in the product details. For warranty inquiries or technical support, please contact Duravit customer service directly or refer to the official Duravit website.
You may find additional support resources or contact information on the official Duravit website.