AcuRite 01080M Pro Accuracy Temperature and Humidity Gauge with Alarms

1. Introduction and Overview

The AcuRite 01080M Pro Accuracy Temperature and Humidity Gauge provides reliable information about your indoor environment. This device helps ensure a comfortable living space, better air quality, and aids in preserving your home's interior and valuable possessions. It is compact, easy to use, and offers various mounting options.

Image 1: Front view of the AcuRite 01080M Pro Accuracy Temperature and Humidity Gauge, displaying current temperature and humidity readings.

2. Setup

2.1. Battery Installation

The AcuRite 01080M requires 2 AA batteries for operation. To install the batteries:

1. Locate the battery compartment on the back of the unit.
2. Remove the battery compartment cover.
3. Insert 2 fresh AA alkaline batteries, ensuring correct polarity (+ and -).
4. Replace the battery compartment cover securely.

2.2. Placement

Place the humidity gauge in a central location within the room where you wish to monitor temperature and humidity. Avoid placing it near heat sources, direct sunlight, or areas with high airflow (e.g., vents, open windows) as these can affect accuracy.

Image 2: The gauge positioned on a kitchen counter, demonstrating typical indoor placement.

3. Operating Instructions

3.1. Reading the Display

The large, bold numbers on the display show the current indoor temperature and humidity. The device measures conditions every 10 seconds to provide up-to-date information.

Image 3: Detailed view of the gauge's display, highlighting the current humidity and temperature, along with recorded high and low values.

3.2. High/Low Records

The gauge displays high and low records for the past 24 hours and for all-time, allowing you to track environmental changes over periods.

3.3. Humidity Level Indicator

A colorful humidity level indicator (LOW / OK / HIGH) at the top of the display provides at-a-glance information on whether humidity levels are within recommended ranges.

• LOW: Less than 25% Relative Humidity (RH) indicates a dry environment.
• OK: Between 25%-55% RH indicates a comfortable environment.
• HIGH: Over 55% RH indicates a humid environment.

3.4. Programmable Alarms

Custom, programmable high and low humidity alarms can be set to notify you when humidity levels fall outside your desired ranges.

3.5. Manual Calibration

The device offers a manual calibration option for both temperature and humidity to ensure professional accuracy of +/- 0.5°F and +/- 2% RH.

Image 4: An annotated diagram illustrating the main features of the AcuRite 01080M, including its professional accuracy sensor, wide range, manual calibration capability, and programmable alarms.

4. Understanding Humidity Levels

Maintaining appropriate humidity levels is crucial for comfort and health. Too much humidity can foster biological pollutants like mold, bacteria, viruses, fungi, and dust mites, potentially triggering respiratory ailments. Conversely, insufficient humidity can lead to nosebleeds, skin irritation, breathing difficulties, and static electricity.

5. Maintenance

5.1. Battery Replacement

Replace batteries when the low battery indicator appears on the display. Always use fresh alkaline batteries for optimal performance.

5.2. Cleaning

Clean the unit with a soft, damp cloth. Do not use abrasive cleaners or chemicals that may damage the display or casing.

6. Troubleshooting

If the unit is not functioning as expected, try the following:

• Ensure batteries are correctly installed and are fresh.
• Relocate the unit away from direct heat sources, sunlight, or strong drafts.
• Perform a manual calibration if you suspect inaccurate readings.

7. Specifications

8. What's in the Box

• AcuRite 01080M Humidity Gauge
• Instruction Manual

9. Official Product Video

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided in the packaging or visit the official AcuRite website. Keep your purchase receipt for warranty claims.