Product Overview
The EarthWay 2600A-PLUS Spreader is a durable and reliable tool designed for precise distribution of lawn and garden materials. Featuring a rust-proof polypropylene hopper and an epoxy powder-coated steel frame, it is built to withstand various weather conditions and provide long-lasting performance.
- Durable Construction: Our fertilizer spreader features a rust-proof polypropylene hopper and epoxy powder coated steel frame, ensuring long-lasting durability. Ideal for both residential and commercial applications, it withstands various weather conditions.
- Superior Spread Control: Equipped with a 3-hole drop shut-off system and solid linkage, this seed spreader guarantees precise distribution. Achieve an even balanced spread pattern for optimal lawn care with our expertly engineered lawn spreader.
- All Terrain Compatibility: With all terrain pneumatic tires, our spreaders for lawns navigate smoothly over diverse surfaces. This grass seed spreader offers excellent maneuverability, making it the perfect tool for spreading seed or lawn fertilizer.
- Ample Hopper Capacity: The 2600A-PLUS lawn & garden spreaders has a 40lb hopper capacity, allowing you to cover large areas efficiently. Perfect for tall fescue grass seed, the broadcast spreader maximizes productivity and minimizes refills.
- Quality Manufacturing: Proudly made, our spreader exemplifies superior craftsmanship. This lawn fertilizer spreader is designed to meet the highest standards, ensuring exceptional performance in all lawn care tasks.
Setup and Assembly
Follow these steps to assemble your EarthWay 2600A-PLUS Spreader. Refer to the video for visual guidance.
Official assembly guide for the EarthWay 2600A-PLUS Spreader.
Key components of the EarthWay 2600A-PLUS Spreader.
- Unpack Components: Carefully remove all parts from the packaging and lay them out. Ensure all components listed in the manual are present.
- Attach Frame to Hopper: Securely attach the main frame to the polypropylene hopper using the provided screws. Do not fully tighten all screws until all components are in place to allow for minor adjustments.
- Install Gearbox: Position the gearbox assembly, ensuring the arrow on the gearbox points towards the front of the spreader.
- Insert Axle: Slide the axle through the designated openings in the frame and gearbox. Ensure the flat part of the axle aligns correctly with the gearbox mechanism.
- Attach Wheels: Mount the pneumatic wheels onto the ends of the axle. Ensure the holes in the wheels align with the axle's holes for the cotter pins.
- Assemble Handle Shaft and Control Rod: Connect the handle shaft to the lower handle assembly. Attach the control rod, ensuring it connects the handle lever to the spreader's shut-off mechanism.
- Secure All Connections: Once all parts are assembled, go back and fully tighten all screws, bolts, and nuts to ensure the spreader is stable and secure for operation.
Operating Instructions
The EarthWay 2600A-PLUS Spreader is designed for efficient and precise material distribution.
Properly filling the hopper with material.
Filling the Hopper
Ensure the shut-off system is closed before filling. Fill the 40lb capacity hopper with your chosen material (fertilizer, seed, etc.). Avoid overfilling to prevent spills and ensure proper operation.
Close-up of the spread rate adjustment lever.
Adjusting Spread Rate
The spreader features a 3-hole drop shut-off system for precise distribution. Refer to your material's recommended application rate, usually found on the product packaging. Use the mechanical lever on the handle to adjust the flow. The lever allows for fine-tuning the opening size to achieve the desired spread pattern.
Operating the spreader for even distribution.
Spreading Technique
Push the spreader at a consistent pace across your lawn or desired area. The all-terrain pneumatic tires ensure smooth navigation over various surfaces, including uneven ground. For precise edge control, utilize the side spread control feature if applicable, which helps prevent material from spreading into unwanted areas like flowerbeds or driveways.
View of the 3-hole drop shut-off system and spreader mechanism.
Maintenance
- Cleaning: After each use, especially when spreading corrosive materials like salt or iron products, thoroughly clean the hopper and all metal components to prevent rust and buildup. Wash off any residue and ensure the unit is dry before storage.
- Tire Pressure: Periodically check the air pressure in the pneumatic tires. Maintain recommended pressure for optimal performance and smooth operation. Tires may lose air over time, so regular inflation is recommended before use.
- Storage: Store the spreader in a dry, covered area to protect it from the elements and prolong its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven spreading | Incorrect spread rate setting or inconsistent walking speed. | Adjust the spread rate according to material recommendations. Maintain a steady walking pace. |
| Material clumping in hopper | Material is damp or too fine/coarse for the setting. | Ensure material is dry. Adjust spread rate or consider a different material type if clumping persists. |
| Tires losing air | Puncture or slow leak. | Inspect tires for punctures. Inflate to recommended pressure before each use. Consider professional repair or replacement if leaks persist. |
| Difficulty with control lever | Buildup of material or loose connections. | Clean the linkage and pivot points. Check all bolts and nuts for tightness. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EarthWay |
| Item Weight | 15 Pounds |
| Item Form | Granules |
| Hopper Capacity | 40lb |
| Specific Uses | fertilizer and seed spreader |
| Target Species | lawn grasses |
| Product Dimensions | 13.5 x 20.8 x 13.5 inches |
| Item Model Number | 2600A-Plus |
| Country of Origin | USA |
Warranty and Support
For warranty information or technical support, please visit the official EarthWay website or contact their customer service.
