1. Introduction
Thank you for choosing the JERDON Wall-Mounted Makeup Mirror. This manual provides essential information for the safe and efficient use of your new mirror. Designed for convenience and clarity, this two-sided mirror features halo lighting and magnification options to assist with various grooming and makeup application needs. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Image: The JERDON HL65N wall-mounted makeup mirror in nickel finish, featuring its illuminated halo and extendable arm.
2. Important Safety Instructions
- Electrical Safety: Always ensure the power outlet is easily accessible and properly grounded. Do not use the mirror with a damaged cord or plug.
- Water Exposure: Do not immerse the mirror in water or other liquids. Avoid placing the mirror where it can fall into a tub or sink.
- Heat and Sunlight: Keep the mirror away from direct sunlight. Reflected sunlight can cause fire. Do not place the mirror near heat sources.
- Children and Pets: This product is not a toy. Keep out of reach of children and pets.
- Maintenance: Unplug the mirror before cleaning. Do not attempt to disassemble or repair the mirror yourself. Refer all servicing to qualified service personnel.
3. Package Contents
- JERDON Wall-Mounted Makeup Mirror (Model HL65N)
- Wall-mount arm assembly
- Mounting hardware (screws, anchors)
- 6-foot coiled power cord (pre-attached for plug-in models)
- User Manual
4. Setup and Installation
The JERDON Wall-Mounted Makeup Mirror is designed for easy installation. For optimal stability and safety, it is highly recommended to mount the mirror to a wall stud.
- Choose Location: Select a suitable location on your wall, preferably near an electrical outlet if using the plug-in option. Ensure there is enough space for the arm to extend and swivel freely.
- Mark Mounting Points: Hold the wall-mount base against the wall at your desired height. Use a pencil to mark the positions for the mounting screws.
- Drill Pilot Holes: If mounting into a wall stud, drill pilot holes slightly smaller than your screws. If mounting into drywall without a stud, use appropriate drywall anchors (included) and drill holes according to anchor instructions.
- Secure Mount: Attach the wall-mount base securely to the wall using the provided screws. Ensure it is firm and stable.
- Connect Power:
- Plug-in Model: Simply plug the pre-attached 6-foot coiled power cord into a standard electrical outlet.
- Direct Wire Model (if applicable): For direct wiring, professional installation by a qualified electrician is recommended. The mirror can be hardwired by routing the power cord through the wall mounting flange and connecting it to a suitable electrical junction box.
Image: The mirror's coiled power cord, illustrating the plug-in option for easy setup.
Image: The mirror extended from the wall, demonstrating its 14-inch reach.
5. Operating Instructions
Your JERDON makeup mirror is designed for versatile use, offering multiple adjustments for your convenience.
- Power On/Off: Locate the on/off switch on the wall-mount base. Toggle the switch to turn the halo lighting on or off.
- Magnification: The mirror features two sides: one with 1X magnification for a standard view and the other with 5X magnification for detailed tasks like tweezing or makeup application. Simply swivel the mirror head 360 degrees to switch between the two magnification levels.
- Arm Extension and Swivel: The mirror is attached to a 14-inch extendable arm. Gently pull or push the arm to adjust the mirror's distance from the wall. The arm also features a smooth 360-degree swivel design, allowing you to position the mirror at virtually any angle you need.
Image: Close-up view illustrating the 1X and 5X magnification capabilities of the mirror.
Image: The mirror head demonstrating its full 360-degree rotation for easy switching between sides.
6. Maintenance and Care
Proper care will ensure the longevity and performance of your mirror.
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the electrical components.
- Cleaning the Finish: For the nickel finish, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
- Bulb Replacement: The halo lighting uses integrated LED bulbs designed for long life. If replacement is ever needed, contact JERDON customer support for assistance. Do not attempt to replace bulbs yourself.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Mirror unplugged or power switch off. | Ensure the mirror is securely plugged into a working outlet and the power switch is in the 'ON' position. Check the circuit breaker if necessary. |
| Mirror arm does not hold position. | Joints may be loose. | Check for any visible screws on the arm joints that may need tightening. Do not overtighten. |
| Mirror surface is distorted. | Incorrect viewing distance for magnification. | For 5X magnification, position your face closer to the mirror (typically within a few inches) for a clear, non-distorted image. |
8. Specifications
- Brand: JERDON
- Model: HL65N
- Finish Type: Brushed Nickel
- Mounting Type: Wall Mount
- Mirror Diameter: 8 inches
- Magnification: 1X / 5X
- Arm Extension: Up to 14 inches from wall
- Power Source: Plug-in (6-foot coiled cord)
- Material: Alloy Steel, Glass
- Item Weight: Approximately 3 pounds
- Product Dimensions: 13.75"L x 9.75"W (when retracted)
9. Warranty and Support
This JERDON Makeup Mirror is protected under a 1-year warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use.
For warranty claims, technical support, or general inquiries, please contact JERDON customer service through their official website or the retailer where the product was purchased. Please have your model number (HL65N) and proof of purchase available when contacting support.