Maxima SC1 High Gloss Coating (Model 78920) User Manual

Introduction

The Maxima SC1 High Gloss Coating, Model 78920, is a specialized aerosol product designed for the powersports industry. It provides a high-gloss finish and protective layer on various surfaces, enhancing appearance and simplifying maintenance.

Key features of this product include:

• Specifically formulated for powersports applications.
• Coats plastic, fiberglass, and painted surfaces.
• Facilitates easier cleanup by preventing mud and dirt adhesion.
• Water-resistant, leaving a dry, long-lasting luster and shine.
• Features a fresh, clean scent.

Image: Maxima SC1 High Gloss Coating aerosol can. The can is black with red and white branding, indicating "SC1 High Gloss Coating" and usage instructions.

Preparation and Setup

1. Clean Surface: Ensure the surface to be treated is clean, dry, and free from dirt, dust, grease, or other contaminants. For best results, wash and dry the vehicle thoroughly before application.
2. Ventilation: Use the product in a well-ventilated area to avoid inhalation of fumes.
3. Shake Can: Shake the aerosol can vigorously for at least one minute before use and occasionally during application to ensure proper mixing of contents.
4. Test Area: It is recommended to test the product on an inconspicuous area first to ensure compatibility and desired finish.

Application Instructions

Follow these steps for optimal application of Maxima SC1 High Gloss Coating:

1. Hold Can Correctly: Hold the can approximately 8-10 inches (20-25 cm) from the surface.
2. Apply Evenly: Spray a light, even coat directly onto plastic, fiberglass, or painted surfaces. Avoid over-application.
3. Wipe (Optional): For a uniform finish and to remove any excess, gently wipe the surface with a clean, soft microfiber cloth immediately after spraying. This step is particularly useful for achieving a streak-free shine.
4. Drying Time: Allow the coating to dry completely. The product leaves a dry, non-greasy finish.
5. Target Areas: This product is excellent for use on motorcycle and ATV fenders, plastic components, and other powersports surfaces to prevent mud and dirt from adhering.

Maintenance and Care

The Maxima SC1 High Gloss Coating simplifies ongoing maintenance:

• Easier Cleaning: Surfaces treated with SC1 will be easier to clean. Mud, dirt, and grime will adhere less, allowing for quicker and more effective washing.
• Reapplication: Reapply as needed to maintain the high gloss finish and protective properties, especially after thorough cleaning or exposure to harsh conditions. The long-lasting luster suggests less frequent reapplication compared to some other products.
• Storage: Store the aerosol can in a cool, dry place away from direct sunlight and heat sources.

Troubleshooting

• Uneven Finish/Streaks: Ensure the surface was thoroughly clean and dry before application. Apply a light, even coat and wipe immediately with a clean microfiber cloth if streaks appear.
• Poor Adhesion/Durability: Verify that the surface was free of grease, oil, or other residues. Extreme temperatures or humidity during application can also affect performance.
• No Shine: Ensure the can was shaken well before and during use. Apply a slightly heavier, but still even, coat if a higher gloss is desired, and wipe if necessary.

Product Specifications

Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always refer to the product label for the most current safety information.

• Extremely Flammable: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• Contents Under Pressure: Do not puncture or incinerate container. Do not expose to temperatures exceeding 120°F (49°C).
• Harmful or Fatal if Swallowed: If swallowed, immediately call a Poison Control Center or doctor. Do not induce vomiting.
• Eye and Skin Irritant: Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. Seek medical attention if irritation persists.
• Inhalation Hazard: Use only in a well-ventilated area. Avoid breathing vapors or spray mist. If inhaled, move to fresh air.
• Keep Out of Reach of Children: Store in a secure location inaccessible to children and pets.

Warranty Information

Specific warranty details for the Maxima SC1 High Gloss Coating are not provided in this manual. For information regarding product warranty, please refer to the manufacturer's official website or contact Maxima customer service directly. Maxima stands behind the quality of its products, and any claims should be directed to them.

Customer Support

For further assistance, technical questions, or product inquiries regarding the Maxima SC1 High Gloss Coating, please contact Maxima customer support. Visit the official Maxima website for contact details, FAQs, and additional product resources.

You can also visit the Maxima Store on Amazon for more products and information.