Introduction
This manual provides comprehensive instructions for setting up, operating, and maintaining your GE Universal Remote Control (Model 24991). This remote is designed to simplify your home entertainment experience by controlling up to three different audio/video devices, including TVs, Blu-ray/DVD players, cable/satellite receivers, Roku boxes, and other streaming media players.
Front view of the GE Universal Remote Control, showing all buttons and the GE logo at the bottom.
Setup
1. Battery Installation
The GE Universal Remote Control requires two (2) AA batteries (not included). To install:
- Remove the battery compartment cover on the back of the remote.
- Insert two AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover.
The remote control, highlighting the device selection buttons and indicating battery requirements.
2. Programming Your Remote
This remote is pre-programmed for Roku and Samsung TVs, allowing immediate control without additional setup for these devices. For other brands and devices, follow the manual programming steps below:
- Find the remote codes: Refer to the code library list provided with your remote or visit the manufacturer's website for a comprehensive list of codes for your specific device brand.
- Enter Setup Mode: Press and hold the SETUP button on the remote until the red indicator light turns on, then release the button.
- Select Device Type: Press and release the device button on the remote that corresponds to the device you want to control (e.g., TV, DVD, CBL, SAT, VCR). The red indicator light will blink once and remain on.
- Enter Code: Using the number buttons, enter the 4-digit code for your device. After entering the code, the red indicator light will turn off.
- Test the Remote: Point the remote at your device and test different functions (e.g., Power, Volume, Channel). If the device responds, the programming was successful.
- Repeat for Additional Devices: If you have more devices to program, repeat steps 2-5 for each one.
Visual guide for programming the remote control to a device.
For an easy-to-follow online setup video, please refer to the official product video below:
Official product video demonstrating the setup and features of the GE Universal Remote Control.
Operating Instructions
1. Device Selection
To control a specific device, press the corresponding device button at the top of the remote (e.g., TV, DVD, CBL, SAT, VCR). The remote will then send commands to that device.
The remote control alongside icons representing various devices it can control, such as sound bars, home theater systems, TVs, DVD/Blu-ray players, cable/satellite boxes, and streaming media players.
2. Basic Functions
- Power: Press the POWER button to turn the selected device on or off.
- Volume Control: Use the VOL + and VOL - buttons to adjust the volume. The master volume control feature allows you to control the volume of your TV regardless of which device is selected.
- Channel Control: Use the CH + and CH - buttons to change channels.
- Mute: Press the MUTE button to silence the audio.
- Number Pad: Use the number buttons (0-9) to directly enter channel numbers or other numerical inputs.
3. Advanced Functions
- Navigation: The central navigation buttons (Up, Down, Left, Right, OK) allow you to navigate menu and guide screens on compatible devices.
- Input: The INPUT button cycles through available video inputs on your TV.
- Digital Dot Button: Provides easy access to sub-channels (e.g., 4.2).
- Media Playback: Dedicated buttons for Play, Pause, Stop, Fast Forward, Rewind, and Record control media playback on DVD/Blu-ray players, VCRs, and DVRs.
The remote supports advanced functions for DVRs and streaming devices, enabling comprehensive control over your media experience.
The GE Universal Remote Control positioned on a black armrest, demonstrating its compact size and ergonomic design in a typical home setting.
Maintenance
Battery Replacement
When the remote's performance degrades or the indicator light does not illuminate, it is time to replace the batteries. Always replace both batteries simultaneously with new AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
Cleaning
To clean the remote, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the remote's surface or internal components.
Troubleshooting
| Problem | Solution |
|---|---|
| Remote does not operate your device. |
|
| Some buttons work, but others do not. |
|
| The red indicator light does not turn on. |
|
Specifications
- Model: 24991
- Brand: General Electric
- Supported Devices: Up to 3 (TVs, Blu-ray/DVD players, cable/satellite receivers, Roku boxes, streaming media players, sound bars)
- Power Source: 2 x AA Batteries (not included)
- Connectivity Technology: Radio Frequency (IR)
- Product Dimensions: 7.7 x 6.6 x 6.3 inches
- Item Weight: 3.36 ounces
The remote control shown with its approximate dimensions: 5.5 inches in length, 1.81 inches in width, and 0.75 inches in thickness.
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your product or visit the official GE Universal Remote website. You can also find additional support and FAQs online.
Official User Manual (PDF): Download PDF
