Introduction
This manual provides detailed instructions for the operation, maintenance, and troubleshooting of your Timex Expedition E-Compass Watch, model T49201. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.
The Timex Expedition E-Compass watch is designed for durability and functionality, featuring an analog-quartz movement, a mineral crystal, and a titanium case. It includes an E-Compass function and is water-resistant up to 100 meters.
Important Safety Information
- Do not attempt to open the watch case. Servicing should only be performed by authorized Timex service centers.
- Avoid exposing the watch to extreme temperatures (above 60°C / 140°F or below 0°C / 32°F) or strong magnetic fields, which can affect accuracy.
- While water-resistant to 100 meters, this watch is suitable for snorkeling and swimming, but not for scuba diving. Do not operate pushers or crown underwater.
- Clean the watch with a soft, dry cloth. Avoid chemical cleaners.
Watch Components
Familiarize yourself with the main components of your Timex Expedition E-Compass watch:
Figure 1: Front view of the Timex Expedition E-Compass watch. This image displays the watch face with its cream dial, black hour markers, and red compass markings. The watch features a titanium case and a brown leather strap. The crown and two pushers are visible on the right side of the case.
- Crown: Used for setting time and date.
- Pushers: Used for activating the E-Compass and other functions.
- Dial: Displays time, date, and compass readings.
- Hands: Hour, minute, and second hands.
- INDIGLO® Night-Light: Illuminates the dial for low-light visibility.
Setup and Initial Operation
Setting the Time
- Pull the crown out to position 2 (fully extended). The second hand will stop.
- Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Push the crown back in to position 1 (normal operating position). The second hand will resume movement.
Setting the Date
- Pull the crown out to position 1 (halfway extended).
- Turn the crown clockwise or counter-clockwise to set the date. Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
- Push the crown back in to position 0 (normal operating position).
Operating the E-Compass Function
The E-Compass function allows you to determine your bearing. For accurate readings, ensure you are away from strong magnetic fields (e.g., large metal objects, electronic devices).
- Activate Compass: Press and hold the upper pusher (usually at 2 o'clock position) for approximately 2 seconds. The second hand will point to North.
- Calibrate (if necessary): If the compass seems inaccurate, hold the watch flat and rotate it slowly in a figure-eight motion several times. Then, reactivate the compass.
- Read Bearing: While the compass is active, rotate your body until the second hand points to 'N' (North) on the dial. The hour hand will then indicate your current bearing.
- Deactivate Compass: The compass will automatically deactivate after a short period (e.g., 20 seconds) or you can press the upper pusher again to turn it off.
Using INDIGLO® Night-Light
To activate the INDIGLO® night-light, simply press the crown inwards. The entire dial will illuminate for a few seconds, providing visibility in low-light conditions.
Maintenance and Care
- Cleaning: Wipe the watch case and crystal with a soft, lint-free cloth. For the leather strap, avoid excessive moisture and harsh chemicals.
- Battery Replacement: When the watch stops or the INDIGLO® light dims significantly, the battery may need replacement. This should be done by a qualified watch technician to maintain water resistance.
- Water Resistance: The watch is water-resistant to 100 meters (330 feet). This means it is suitable for recreational surfing, swimming, snorkeling, sailing, and water sports. It is NOT suitable for diving. Always ensure the crown is fully pushed in before exposing the watch to water.
- Storage: Store your watch in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs intermittently. | Low battery. | Replace battery by a qualified technician. |
| INDIGLO® light is dim or not working. | Low battery. | Replace battery. |
| Compass reading is inaccurate. | Interference from magnetic fields; needs calibration. | Move away from electronic devices/metal objects. Perform compass calibration (figure-eight motion). |
| Water inside the watch. | Crown not fully pushed in; seals compromised. | Immediately take to an authorized service center. Do not attempt to dry it yourself. |
Specifications
- Model Number: T49201
- Movement: Analog-Quartz
- Case Material: Titanium
- Case Diameter: 46 mm
- Crystal: Mineral
- Dial Color: Cream
- Strap Material: Leather
- Water Resistance: 100 meters (330 feet) - Suitable for snorkeling and swimming, not diving.
- Features: E-Compass, Date Function, INDIGLO® Night-Light
Figure 2: Watch case size comparison diagram. This image illustrates different watch case diameters ranging from 14-16mm up to 50-54mm, providing a visual reference for watch sizing. The Timex Expedition E-Compass T49201 has a 46mm case diameter.
Warranty Information
Your Timex watch is warranted against manufacturing defects for a period of one year from the original date of purchase. This warranty does not cover normal wear and tear, battery, crystal, strap, or unauthorized service. For full warranty terms and conditions, please refer to the official Timex website or contact customer support.
Customer Support
For further assistance, service, or to purchase replacement parts, please contact Timex Customer Service:
- Website: www.timex.com/support
- Phone: Refer to the Timex website for regional contact numbers.
- Service Centers: Information on authorized service centers can be found on the Timex website.
