Introduction
This manual provides essential instructions for the safe setup, operation, and maintenance of your Intex Swim Center Clearview Aquarium Inflatable Pool. This pool is designed for recreational water play for children aged 3 years and older. The pool dimensions are approximately 62.5 inches x 62.5 inches x 19.5 inches (159 cm x 159 cm x 50 cm) with a water capacity of 90 gallons (340 liters) at 11 inches (28 cm) wall height.
Safety Information
WARNING: To prevent drowning and other serious injuries, always follow these safety guidelines:
- Constant Supervision Required: Children, especially those under 5 years old, are at high risk of drowning. Always keep children in sight and within arm's reach when they are in or near the pool.
- Adult Assembly Only: This product must be assembled by adults.
- Secure Placement: Set up the pool on a firm, level surface, free of sharp objects, rocks, or debris. Do not set up on a slope or uneven ground.
- Empty When Not in Use: Always empty the pool completely after each use to prevent water accumulation, which can be a drowning hazard.
- No Diving or Jumping: The pool is not deep enough for diving or jumping. Serious injury can result.
- Keep Away from Heat Sources: Do not place the pool near open flames, heaters, or other hot surfaces.
- Repair Kit: Keep the included repair patch handy for minor punctures.
Package Contents
Verify that all components are present before beginning assembly:
- Intex Swim Center Clearview Aquarium Inflatable Pool (Model 57471EP)
- Repair Patch
Setup
- Choose a Location: Select a flat, level area in your yard, away from sharp objects, trees, or structures that could damage the pool or cause injury. Ensure the ground is clear of debris.
- Unfold the Pool: Carefully unfold the pool and lay it flat in the chosen location.
- Inflate the Pool: Locate the inflation valves. Use an air pump (not included) to inflate each chamber until it is firm to the touch but not over-inflated. Over-inflation can cause damage. The pool features a single-chamber design for quick inflation. Ensure the inflation valves are securely closed after inflation.
Image: The Intex Swim Center Clearview Aquarium Inflatable Pool, empty and ready for inflation or filling.
- Fill with Water: Begin filling the pool with water using a garden hose. Fill to the indicated water level line, or until the water reaches approximately 11 inches (28 cm) from the top of the pool wall. Do not overfill.
Image: The Intex Swim Center Clearview Aquarium Inflatable Pool filled with water and in use.
Operating
Once the pool is set up and filled, it is ready for use. Always ensure proper supervision, especially for young children.
- Supervision: An adult must always be present and actively supervising children in and around the pool.
- Water Level: Maintain the water level within the recommended range to ensure stability and safety.
- Capacity: The pool is designed for several children. Do not exceed the recommended occupancy to prevent damage or injury.
Maintenance
Regular maintenance helps prolong the life of your inflatable pool.
- Cleaning: Regularly clean the pool interior with mild soap and water. Rinse thoroughly.
- Draining: To drain the pool, locate the drain plug at the bottom. Open the plug to release the water. You may need to gently lift one side of the pool to facilitate complete drainage.
- Drying: After draining, allow the pool to air dry completely before deflating and storing.
- Storage: Deflate the pool by opening the air valves. Fold it neatly and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pool loses air quickly | Loose inflation valve cap or small puncture. | Ensure all valve caps are securely closed. Inspect the pool surface for small holes. Use the included repair patch to seal any punctures. |
| Water leaks from pool | Puncture in the pool material or drain plug not sealed. | Check the drain plug for a secure seal. Inspect the bottom and sides of the pool for any holes. Apply a repair patch if a puncture is found. |
| Pool walls are not firm | Under-inflated chambers. | Re-inflate the chambers until they are firm but not rigid. Avoid over-inflation. |
Specifications
- Model Number: 57471EP
- Dimensions (L x W x H): 62.5" x 62.5" x 19.5" (159 cm x 159 cm x 50 cm)
- Material: 12ga Vinyl (Polyvinyl Chloride - PVC)
- Water Capacity: 90 gallons (340 liters) at 11" (28 cm) wall height
- Age Range: 3+ years
- Shape: Square
- Color: White with Clearview Aquarium graphics
Warranty
This product comes with a 30-day limited warranty. For specific details regarding warranty coverage and claims, please refer to the documentation included with your purchase or contact the manufacturer directly.
Support
For further assistance, questions, or to report issues with your Intex Swim Center Clearview Aquarium Inflatable Pool, please contact Intex customer support. Contact information can typically be found on the product packaging or the official Intex website.