Feit Electric Bppl27f/65

Feit Electric Bppl27f/65 27 Watt Daylight 4 Pin Compact Fluorescent Light Bulb User Manual

Introduction

This manual provides essential information for the safe and effective use of your Feit Electric Bppl27f/65 27 Watt Daylight 4 Pin Compact Fluorescent Light Bulb. Please read these instructions carefully before installation and operation.

Safety Information

Setup and Installation

Follow these steps to properly install your Feit Electric Bppl27f/65 compact fluorescent light bulb:

  1. Ensure Power is Off: Before beginning, turn off the power to the light fixture at the main circuit breaker or wall switch.
  2. Remove Old Bulb (if applicable): Allow the old bulb to cool completely. Carefully grasp the base of the old bulb and pull it straight out from the socket. Do not twist the glass tubes.
  3. Insert New Bulb: Align the four pins on the base of the Feit Electric Bppl27f/65 bulb with the corresponding slots in the fixture's socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
  4. Restore Power: Once the bulb is securely installed, restore power to the fixture at the circuit breaker or wall switch.
Feit Electric Bppl27f/65 27 Watt Daylight 4 Pin Compact Fluorescent Light Bulb

Image: Feit Electric Bppl27f/65 27 Watt Daylight 4 Pin Compact Fluorescent Light Bulb, showing the four-pin base and tubular design.

Note: This bulb features a 4-pin (GX10q-4 type) base. Ensure your fixture is compatible with this base type. Some fixtures may require specific ballast types for optimal performance.

Operating Instructions

Operation of the Feit Electric Bppl27f/65 bulb is straightforward:

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up.
  • No power to the fixture.
  • Bulb not properly seated.
  • Bulb is faulty or has reached end of life.
  • Fixture or ballast issue.
  • Check circuit breaker and wall switch.
  • Ensure bulb pins are fully inserted into the socket.
  • Replace with a new, compatible bulb.
  • Consult a qualified electrician if fixture issues are suspected.
Bulb flickers or is dim.
  • Bulb nearing end of life.
  • Incompatible dimmer switch.
  • Low voltage or ballast issue.
  • Replace the bulb.
  • Ensure fixture is not connected to an incompatible dimmer.
  • Consult a qualified electrician.
Bulb does not fit.
  • Incorrect base type for fixture.
  • Verify the fixture requires a 4-pin (GX10q-4) compact fluorescent bulb.

Specifications

FeatureDetail
BrandFeit Electric
Model NameBppl27f/65
Part Number1001-3175
Light TypeFluorescent
Wattage27 Watts
Voltage120 Volts
Color Temperature6500 Kelvin (Daylight White)
Brightness1600 Lumens
Bulb Base4-Pin (GX10q-4 type)
Average Life10,000 Hours
Product Dimensions1 x 6 x 9.75 inches
Item Weight3.84 ounces
Indoor/Outdoor UsageIndoor

Warranty Information

Specific warranty details for the Feit Electric Bppl27f/65 bulb are not provided in the product information. For warranty inquiries, please refer to the packaging or contact Feit Electric customer support directly.

Customer Support

If you have any questions, require assistance, or need further information regarding your Feit Electric Bppl27f/65 light bulb, please contact Feit Electric customer support. Contact details can typically be found on the product packaging or on the official Feit Electric website.

You can also visit the Feit Electric Store on Amazon for more product information.

Related Documents - Bppl27f/65

Preview Feit Electric T848/830/B/LED/2 LED Tube Bypass Assembly Instructions
Comprehensive guide for installing the Feit Electric T848/830/B/LED/2 LED tube light. This document details the ballast bypass procedure, including essential safety warnings, cautions, and step-by-step instructions for qualified electricians.
Preview Feit Electric T96 Plug and Play Linear LED Lamp: Safety Instructions and Installation Guide
Comprehensive safety instructions and installation guide for the Feit Electric T96 Plug and Play Linear LED Lamp, covering installation, warranty, and FCC compliance. Learn how to safely replace fluorescent tubes with this LED alternative.
Preview Feit Electric T848/850/B/LED/2 Bypass Assembly Instructions for LED Tubes
Step-by-step guide for bypassing magnetic or electronic ballasts and installing Feit Electric T848/850/B/LED/2 LED tubes. Includes safety warnings, installation procedures, and compliance information.
Preview Feit Electric T12 Plug and Play LED Lamp Installation Guide & Safety Instructions
This guide from Feit Electric provides essential safety information and step-by-step instructions for installing their T12 Plug and Play Linear LED lamps, designed as a direct replacement for fluorescent tubes.
Preview Feit Electric T8 LED Hybrid Tube Installation Guide (T4815/840/AB/LED/10)
Comprehensive installation guide for Feit Electric T8 LED Hybrid Tubes (Item # T4815/840/AB/LED/10). Covers Plug & Play (Type A) and Ballast Bypass (Type B) installation methods, including safety warnings and cautions.
Preview Feit Electric T8 Ballast Bypass Linear Lamp Installation Guide
Comprehensive safety instructions and installation guide for the Feit Electric T8 Ballast Bypass Linear LED Lamp, including wiring diagrams and warranty information.