ATLAS 620 GLOVE LARGE User Manual

1. Introduction

The SHOWA ATLAS 620 Large Vinylove PVC Gloves are designed to provide reliable hand protection in various work environments. These gloves offer comfort, fit, and liquid-proof protection, making them ideal for tasks involving wet, muddy, or messy conditions.

Figure 1: Front view of the SHOWA ATLAS 620 Large Vinylove PVC Gloves.

2. Key Features

• Vinylove PVC Construction: Durable and flexible polyvinyl chloride material.
• Comfort and Fit: Engineered for ergonomic comfort during extended use.
• Liquid-Proof Protection: Provides an effective barrier against liquids, suitable for wet conditions.
• Versatile Use: Ideal for wet, muddy, or messy jobs requiring hand protection.
• Color: Distinctive orange color for visibility.
• Chemical Resistant: Offers resistance to certain chemicals.
• Waterproof: Ensures hands remain dry in wet environments.

3. Setup and Preparation

1. Inspection: Before each use, visually inspect the gloves for any signs of damage, such as tears, punctures, or excessive wear. Do not use damaged gloves as their protective properties may be compromised.
2. Sizing: Ensure the gloves fit properly. The ATLAS 620 is available in Large size (Pack of 1 pair). A proper fit ensures comfort, dexterity, and optimal protection.
3. Cleanliness: Ensure hands are clean and dry before donning the gloves to maintain hygiene and prevent irritation.

Figure 2: Close-up of a single SHOWA 620 glove, highlighting the CE markings and model number.

4. Operating and Usage

The ATLAS 620 gloves are designed for general purpose hand protection in environments where liquid and chemical resistance are required. Follow these guidelines for optimal performance:

• Donning: Carefully slide your hands into the gloves, ensuring fingers are fully seated in each digit.
• Application: Use these gloves for tasks such as:
  • Handling wet or damp materials.
  • Working in muddy or messy conditions.
  • Tasks requiring protection against certain chemicals (refer to chemical resistance charts if available for specific substances).
  • General maintenance and cleaning tasks.
• Removal: To remove, grasp the cuff of one glove and pull it off inside out, avoiding contact with the outer contaminated surface. Repeat for the other glove.

Figure 3: Side view of the SHOWA 620 gloves, illustrating their length and fit.

5. Maintenance and Storage

• Cleaning: After use, clean the gloves by rinsing them with water and mild soap, if necessary. Avoid harsh chemicals or abrasive cleaners that could degrade the PVC material.
• Drying: Allow the gloves to air dry completely before storing. Do not expose them to direct sunlight or excessive heat, which can cause material degradation.
• Storage: Store gloves in a cool, dry place away from direct sunlight, extreme temperatures, and sharp objects. Proper storage extends the lifespan of the gloves.

6. Troubleshooting

While the ATLAS 620 gloves are durable, certain issues may arise. Here are common concerns and their resolutions:

• Reduced Protection: If gloves show signs of wear, tears, or punctures, their protective barrier is compromised. Solution: Discard and replace with a new pair.
• Discomfort/Poor Fit: If gloves feel too tight or too loose, it can affect dexterity and comfort. Solution: Ensure you are using the correct size (Large for this model). Refer to sizing guides if available for future purchases.
• Odor: Persistent odor can develop from prolonged use or improper drying. Solution: Thoroughly clean and air dry the gloves after each use. Consider using a deodorizing spray if necessary.

7. Specifications

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the official SHOWA website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Official SHOWA Website: www.showagroup.com

For Amazon-specific inquiries, please visit the SHOWA Store on Amazon.