Satco S6082 25 Watt A19 130V Incandescent Light Bulb User Manual

1. Product Overview

The Satco S6082 is a 25-watt A19 incandescent light bulb designed for general lighting applications. It features a transparent blue finish, providing a distinct aesthetic. This bulb operates at 130 volts and utilizes a standard E26 medium base, making it compatible with most common light fixtures. It is rated for an average life of 1000 hours.

• Wattage: 25 Watts
• Bulb Shape: A19
• Voltage: 130 Volts
• Base Type: E26 Medium
• Light Color: Transparent Blue
• Average Rated Hours: 1000 hours

Image 1.1: Satco S6082 Transparent Blue A19 Incandescent Light Bulb, showing its dimensions of 4.13 inches in length and 2.38 inches in width.

2. Safety Information

Please read and understand all safety instructions before installing or using this light bulb. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Power Off: Always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
• Correct Voltage: Ensure the fixture's voltage (130V) matches the bulb's voltage. Using an incorrect voltage can damage the bulb or fixture and pose a fire hazard.
• Handle with Care: Incandescent bulbs can become hot during operation. Allow the bulb to cool completely before handling.
• Dry Location Use: This bulb is intended for indoor use. Do not expose to water or excessive moisture.
• Proper Disposal: Dispose of used or broken bulbs according to local regulations.

3. Setup and Installation

Follow these steps to safely install your Satco S6082 incandescent light bulb:

1. Turn Off Power: Locate the light fixture's power switch and turn it to the OFF position. For added safety, turn off the power at the main circuit breaker or fuse box.
2. Remove Old Bulb (if applicable): If replacing an existing bulb, ensure it is cool to the touch. Unscrew the old bulb counter-clockwise from the socket.
3. Inspect Fixture: Check the light fixture's socket for any damage or debris. Ensure it is clean and dry.
4. Install New Bulb: Carefully screw the Satco S6082 bulb clockwise into the E26 medium base socket until it is snug. Do not overtighten, as this can damage the bulb or socket.
5. Restore Power: Turn the power back on at the circuit breaker or fuse box, then flip the light switch to the ON position to test the bulb.

4. Operating Instructions

Operating the Satco S6082 incandescent light bulb is straightforward:

• Power On/Off: Use the standard wall switch or fixture switch to turn the light bulb on or off.
• Light Output: The bulb will emit a transparent blue light when powered on.

5. Maintenance

Minimal maintenance is required for this incandescent light bulb.

• Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Replacement: Replace the bulb when it reaches the end of its average rated life (approximately 1000 hours) or if it burns out. Follow the installation steps for safe replacement.

6. Troubleshooting

If your Satco S6082 light bulb is not functioning correctly, consider the following:

• Bulb Does Not Light Up:
  • Check if the power switch is in the ON position.
  • Ensure the bulb is screwed in securely into the socket.
  • Verify that the circuit breaker has not tripped or a fuse has not blown.
  • Test the bulb in another working fixture to confirm if the bulb itself is faulty.
  • Ensure the fixture is receiving power.
• Bulb Flickers:
  • Check for a loose connection in the socket.
  • Ensure the fixture is compatible with incandescent bulbs.

7. Specifications

8. Warranty Information

This Satco S6082 incandescent light bulb comes with a limited warranty based on its average rated hours. For specific warranty terms and conditions, please refer to the product packaging or contact Satco customer service.

9. Support

For further assistance or inquiries regarding your Satco S6082 light bulb, please visit the official Satco website or contact their customer support. Keep your purchase receipt for any warranty claims.