Wahl Professional Basic Pro Hair Clipper Instruction Manual

Introduction

The Wahl Professional Basic Pro Clipper is a commercial-grade product designed for professional use, offering sharp performance for barbers and stylists. Its compact size and sleek design provide both aesthetic appeal and high precision functionality. This clipper delivers the power of a full-size unit in a miniature form factor that fits comfortably in the hand. This manual provides essential information for the proper use and maintenance of your Wahl Professional Basic Pro Clipper.

Safety Information

WARNING:

• Keep the clipper away from water sources. Do not use near bathtubs, showers, basins, or other vessels containing water.
• Do not use on infants.
• Always follow recommended cleaning and maintenance procedures.
• This product is intended for professional use only.
• For sale and use in the U.S.A. only.
• Product appearance may slightly vary from images due to continuous improvement.
• Always read and follow all operating instructions before use.

Package Contents

Your Wahl Professional Basic Pro Clipper package includes the following items:

• Wahl Professional Basic Pro Clipper (Model 8255)
• 4 Attachment Comb Cutting Guides: 1/8" (3mm), 1/4" (6mm), 3/8" (10mm), and 1/2" (13mm)
• Styling Comb
• Cleaning Brush
• Clipper Blade Oil
• Red Blade Guard
• Operating Instructions (this manual)

Image: Wahl Professional Basic Pro Clipper set, including the clipper, various attachment combs, and accessories, presented in its clear retail packaging.

Image: Included accessories: styling comb, red blade guard, cleaning brush, and clipper blade oil.

Setup

Unpacking and Initial Inspection

Carefully remove all components from the packaging. Inspect the clipper and accessories for any signs of damage. Ensure all listed package contents are present. The clipper is designed for immediate use after unpacking.

Attaching Guide Combs

To attach a guide comb, align the comb with the clipper blade and firmly push it onto the blade until it clicks into place. Ensure it is securely fastened before use. To remove, gently pull the comb away from the blade.

Image: The four included attachment comb cutting guides.

Operating Instructions

The Wahl Professional Basic Pro Clipper features a powerful electromagnetic motor, suitable for various hair cutting techniques. It can be used on both wet and dry hair.

General Hair Cutting

Select the desired attachment comb for the length of cut. For shorter lengths, use smaller numbered combs. For longer lengths, use higher numbered combs. Always start with a longer comb if unsure, and gradually reduce the length. Move the clipper against the direction of hair growth for an even cut.

Adjusting the Blade Lever

The blade lever on the side of the clipper allows for fine adjustment of the cutting length without changing attachment combs. Moving the lever up shortens the cut, and moving it down lengthens the cut. This is useful for blending and tapering.

Clipper Over Comb Technique

For precise blending and tapering, especially on longer hair, use the clipper over comb technique. Hold the comb flat against the head, lifting the hair to the desired length. Guide the clipper over the comb, cutting the hair that extends beyond the comb's teeth. This method allows for controlled and gradual transitions.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Wahl Professional Basic Pro Clipper.

Cleaning the Blades

After each use, use the provided cleaning brush to remove any loose hair from the blades. For thorough cleaning, you may use a clipper cleaning spray or disinfectant.

Oiling the Blades

Regular oiling of the blades is crucial to reduce friction, prevent pulling and snagging, and protect against rust. Apply a drop of clipper oil to each corner of the top blade and to the foot of the blade. Turn the clipper on for a few seconds to allow the oil to distribute evenly. This protects the blades and enhances performance.

Disinfecting

After each client, disinfect the clipper blades using a suitable clipper disinfectant to maintain hygiene standards. Ensure the disinfectant is compatible with clipper blades and follow the product's instructions.

Specifications

Troubleshooting

If you experience issues with your Wahl Professional Basic Pro Clipper, consider the following common troubleshooting steps:

• Clipper not turning on: Ensure the clipper is properly plugged into a working electrical outlet. Check the power cord for any damage.
• Clipper pulling or snagging hair: This often indicates dull blades or insufficient lubrication. Clean and oil the blades as described in the Maintenance section. If the issue persists, the blades may need sharpening or replacement.
• Excessive noise or vibration: Ensure the blade screws are tightened correctly. If the noise persists, it may indicate an internal issue requiring professional service.
• Uneven cutting: Verify that the attachment comb is securely fastened and that the blade lever is set to the desired position. Ensure hair is clean and free of tangles before cutting.

For further assistance, please refer to the Warranty and Support section.

Warranty and Support

Wahl Professional Products purchased from an authorized dealer feature a manufacturer’s warranty. This warranty is not available from unauthorized dealers. For specific warranty details and to register your product, please visit the official Wahl Professional website or contact their customer support.

For more information and support, visit the Wahl Professional Store.