1. Introduction
This manual provides detailed instructions for the proper installation and use of the Steinel Corner Wall Mount 02. This accessory is designed to securely attach compatible Steinel sensor-switched floodlights to external corners of buildings or structures. It ensures optimal positioning and stability for your lighting system.
The Corner Wall Mount 02 is compatible with the following Steinel floodlight models:
- LS 150 LED
- HS 150 DUO
- H 150
- HS-FE 150
2. Safety Instructions
Please read these safety instructions carefully before installation and keep them for future reference.
- Qualified Personnel: Installation should only be performed by a qualified electrician or competent person in accordance with national wiring regulations and local building codes.
- Power Disconnection: Always ensure the main power supply to the installation area is switched off before commencing any work.
- Secure Mounting: Ensure the mounting surface is structurally sound and capable of supporting the weight of the mount and the attached floodlight.
- Correct Fasteners: Use appropriate screws and wall plugs for the specific wall material (e.g., brick, concrete, wood).
- Environmental Conditions: This mount is designed for outdoor use. Ensure all connections and installations are weather-resistant.
- Product Integrity: Do not modify or alter the mount. Use only genuine Steinel parts and accessories.
3. Package Contents
Verify that all components are present before beginning installation:
- 1x Steinel Corner Wall Mount 02 (Black)
- Mounting accessories (screws, wall plugs)
Figure 1: Steinel Corner Wall Mount 02. This image displays the black plastic bracket, highlighting its design for corner installation and the various pre-drilled holes for secure attachment and cable management.
4. Installation
Follow these steps for secure installation of the Corner Wall Mount 02:
- Choose Location: Select an external corner suitable for mounting your floodlight. Ensure there is sufficient space and a stable surface.
- Mark Drilling Points: Hold the corner wall mount against the desired position on the external corner. Use a pencil to mark the drilling points through the designated screw holes on the mount (refer to Figure 1 for hole locations).
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for your wall material. The depth and diameter of the holes should match the provided wall plugs.
- Insert Wall Plugs: Insert the wall plugs into the drilled holes until they are flush with the wall surface.
- Attach Mount: Position the corner wall mount over the wall plugs. Securely fasten the mount to the wall using the provided screws. Ensure the mount is firmly attached and does not wobble.
- Mount Floodlight: Once the corner wall mount is securely installed, attach your compatible Steinel floodlight (e.g., LS 150 LED, HS 150 DUO) to the mount according to the floodlight's specific installation instructions. Ensure all electrical connections are made safely and correctly.
For detailed instructions on connecting and operating your Steinel floodlight, please refer to the manual provided with your specific floodlight model.
5. Operation
The Steinel Corner Wall Mount 02 is a passive accessory designed to provide a stable and correctly angled mounting point for compatible Steinel floodlights on external corners. It does not have any active operational functions. Its purpose is to ensure the floodlight is securely positioned for optimal performance.
6. Maintenance
- Cleaning: Clean the mount periodically with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the plastic finish.
- Inspection: Regularly inspect the mount and its fasteners for any signs of wear, damage, or loosening. Tighten screws if necessary.
- Environmental Factors: Ensure that no debris or vegetation obstructs the floodlight or its sensor once mounted.
7. Troubleshooting
If you encounter issues with the Corner Wall Mount 02, consider the following:
- Mount is Loose:
- Ensure screws are fully tightened.
- Verify that appropriate wall plugs were used for the wall material.
- Check the integrity of the wall surface.
- Floodlight Not Secure:
- Confirm that the floodlight is correctly attached to the mount according to its own manual.
- Inspect the mount for any damage that might prevent secure attachment.
For issues related to the floodlight's functionality (e.g., sensor not working, light not illuminating), please refer to the troubleshooting section of your specific Steinel floodlight manual.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 630560 |
| Brand | Steinel |
| Color | Black |
| Material | Plastic |
| Mounting Type | Corner Wall Mounting (Eckwandmontage) |
| Product Dimensions | 6.89 x 2.36 x 6.69 inches |
| Item Weight | 1.2 ounces |
| Included Components | Mounting accessories |
| Compatible Floodlights | Steinel LS 150 LED, HS 150 DUO, H 150, HS-FE 150 |
9. Warranty and Support
For information regarding warranty terms and conditions, please refer to the documentation provided with your original purchase or visit the official Steinel website. For technical support or further assistance, please contact Steinel customer service through their official channels.
You can find more information and contact details on the Steinel Store.
