1. Introduction
Thank you for choosing the hansgrohe Talis S Shower Mixer. This product is designed for concealed installation and provides precise control over water flow and temperature for a single shower outlet. This manual provides essential information for safe installation, operation, and maintenance of your new shower mixer. Please read these instructions carefully before installation and keep them for future reference.
2. Safety Information
- Installation must be carried out by qualified personnel in accordance with local plumbing and building codes.
- Ensure the water supply is turned off before beginning any installation or maintenance work.
- Protect the product from frost.
- Operating pressure: Minimum 1 bar / Maximum 10 bar.
- Avoid using abrasive cleaners or solvents, as these can damage the surface finish.
3. Product Overview
The hansgrohe Talis S Shower Mixer consists of several key components designed for durability and ease of use. It includes an escutcheon, handle, sleeve, and a ceramic mixing unit for reliable performance.
Image 1: hansgrohe Talis S Shower Mixer for 1 Outlet, Chrome. This image shows the complete shower mixer unit, highlighting its sleek design and chrome finish.
4. Setup and Installation
This shower mixer is designed for concealed installation. Ensure you have the necessary tools and follow the steps below. Refer to the technical drawing for precise dimensions and installation depth.
4.1 Included Components:
- Escutcheon
- Handle
- Sleeve
- Mixing Unit (ceramic cartridge)
4.2 Installation Steps:
- Turn off the main water supply.
- Prepare the wall opening for the concealed mixing unit according to the dimensions provided in the technical drawing.
- Connect the water supply lines to the mixing unit. The inlet connection type is Socket Weld, and the outlet connection type is Compression.
- Secure the mixing unit within the wall.
- Install the sleeve, escutcheon, and handle onto the mixing unit.
- Turn on the water supply and check for leaks.
Image 2: Technical drawing illustrating the dimensions and installation depth for the hansgrohe Talis S Shower Mixer. All measurements are in millimeters.
5. Operating Instructions
The hansgrohe Talis S Shower Mixer features a single lever for intuitive control of water flow and temperature.
- Turning On/Off: Lift the lever to turn on the water. Push it down to turn off.
- Adjusting Flow: The further you lift the lever, the higher the water flow.
- Adjusting Temperature: Swivel the lever to the left for hot water and to the right for cold water.
6. Maintenance and Care
To ensure the longevity and pristine appearance of your hansgrohe shower mixer, follow these care instructions:
- Clean the mixer regularly with a soft cloth and a mild, non-abrasive cleaning agent.
- Avoid cleaners containing alcohol, hydrochloric acid, formic acid, acetic acid, or chlorine, as these can damage the surface.
- Rinse the mixer thoroughly with clean water after cleaning and dry with a soft cloth.
- Periodically check connections for any signs of leakage.
7. Troubleshooting
If you encounter any issues with your shower mixer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator or showerhead; low water pressure | Clean or replace aerator/showerhead; check main water supply pressure. |
| Water temperature fluctuates | Issues with water heater; pressure imbalance | Check water heater settings; consult a plumber for pressure balancing. |
| Leakage from handle/escutcheon | Loose connections; worn seals/cartridge | Tighten connections; if problem persists, the ceramic cartridge may need replacement by a professional. |
If you cannot resolve the issue using the information above, please contact a qualified plumber or hansgrohe customer service.
8. Specifications
- Model Number: 32675000
- Brand: hansgrohe
- Material: Metal
- Exterior Finish: Chrome
- Item Dimensions (L x W x H): 2.83 x 5.91 x 5.91 inches
- Item Weight: 1.11 Kilograms
- Inlet Connection Type: Socket Weld
- Outlet Connection Type: Compression
- Number of Ports: 1
- Maximum Operating Pressure: 10 Bars
- Included Components: 1 x "Talis" S Single Lever Shower Tap for Concealed Installation
9. Warranty and Support
hansgrohe products are manufactured to the highest quality standards. This product comes with a 5-year warranty, ensuring peace of mind regarding manufacturing defects. Additionally, hansgrohe guarantees 15 years of spare parts availability, ensuring that your product can be maintained and repaired for an extended period.
Image 3: Warranty information indicating a 5-year product warranty and 15-year spare parts availability. Image 4: "Quality Made by hansgrohe" emblem, signifying the brand's commitment to high standards.
For further assistance, technical support, or warranty claims, please visit the official hansgrohe website or contact their customer service department. Always refer to your product model number (32675000) when seeking support.
You can find more information and contact details on the hansgrohe store page: Visit the hansgrohe Store