1. Introduction
This instruction manual provides essential information for the safe installation, operation, and maintenance of your Leviton 5622-2E Decora Plus Rocker Double-Pole AC Quiet Switch. Please read this manual thoroughly before proceeding with installation or use. Retain this manual for future reference.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. IMPROPER INSTALLATION CAN RESULT IN SERIOUS INJURY OR DEATH.
- Always turn off power at the circuit breaker or fuse box before wiring.
- Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
- Do not use this device with loads exceeding its specified ratings.
- Ensure all wire connections are secure and properly insulated.
- This switch is designed for indoor use in dry locations unless protected by a suitable enclosure.
3. Product Overview
The Leviton 5622-2E is a 20-Amp, 120/277-Volt Decora Plus Rocker Double-Pole AC Quiet Switch. It is designed for commercial-grade applications, offering durability and reliable performance. Its Decora styling integrates seamlessly into modern environments.
Figure 1: Front view of the Leviton 5622-2E Decora Plus Rocker Double-Pole AC Quiet Switch in black.
Key Features:
- Full Rated Current Capacity: Suitable for tungsten, fluorescent, or resistive loads. Motor capacity is 80% of the switch rating.
- Versatile Wiring: Features both back and side-wiring terminals, accommodating solid and stranded wire for easier installation.
- Durable Construction: Made from heavy-duty impact-resistant thermoplastic for extended service life in commercial settings.
- Grounding Options: Includes a green grounding screw and a self-grounding clip for flexible grounding.
- Compliance: Meets or exceeds applicable UL, CSA, and NOM testing standards.
4. Setup and Installation
IMPORTANT: Ensure power is OFF at the circuit breaker before beginning installation.
- Turn Off Power: Locate the circuit breaker or fuse controlling the circuit where the switch will be installed and turn it OFF. Verify power is off using a voltage tester.
- Prepare Wires: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires.
- Connect Ground Wire: Connect the bare copper or green insulated ground wire from the electrical box to the green grounding screw on the switch. Alternatively, use the self-grounding clip if applicable to your metal box.
- Connect Line/Load Wires:
- Identify the two "hot" (line/load) wires from your electrical circuit.
- Connect one hot wire to one of the brass-colored screw terminals on the switch.
- Connect the second hot wire to the other brass-colored screw terminal on the switch.
- This switch is a double-pole switch, meaning it interrupts both hot legs of a 120/277V circuit simultaneously.
- Wires can be connected using either the side-wiring screws or by inserting straight wires into the back-wiring holes and tightening the screws.
- Secure Switch: Carefully fold the wires into the electrical box and secure the switch to the box using the mounting screws provided.
- Install Wallplate: Attach the Decora wallplate (sold separately) over the switch.
- Restore Power: Turn the power back ON at the circuit breaker.
For detailed wiring diagrams specific to your application, consult a qualified electrician or refer to local electrical codes.
5. Operating Instructions
The Leviton 5622-2E switch operates as a simple ON/OFF control for your connected electrical load.
- To turn the connected device or lighting ON, press the top portion of the rocker switch.
- To turn the connected device or lighting OFF, press the bottom portion of the rocker switch.
The switch provides a quiet, positive action when toggled.
6. Maintenance
The Leviton 5622-2E Decora Plus Rocker Double-Pole AC Quiet Switch requires minimal maintenance.
- Cleaning: To clean the switch, ensure power is off at the circuit breaker. Use a soft, damp cloth with a mild, non-abrasive cleaner. Do not spray cleaner directly onto the switch.
- Inspection: Periodically inspect the switch and wallplate for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.
7. Troubleshooting
If the switch is not functioning as expected, consider the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not turn load ON/OFF. |
|
|
| Switch feels loose or wobbly. | Mounting screws are loose. | Turn off power, tighten mounting screws. |
If troubleshooting steps do not resolve the issue, consult a qualified electrician.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | 5622-2E |
| Current Rating | 20 Amps |
| Operating Voltage | 120/277 Volts AC |
| Operation Mode | Manual |
| Contact Type | Normally Open |
| Connector Type | Screw |
| Terminal Type | Screw |
| Circuit Type | Double-Pole (1-way) |
| Actuator Type | Rocker |
| Product Dimensions (L x W x H) | 2 x 1.75 x 4 inches |
| Manufacturer | Leviton |
9. Warranty and Support
For warranty information and technical support, please contact Leviton customer service directly or visit the official Leviton website. Keep your purchase receipt for warranty claims.
Leviton Contact Information:
- Website: www.leviton.com
- Refer to the website for current contact numbers and support resources.
