Lexon On/Off 3 Position LCD Alarm Clock LR98-B User Manual

Introduction

Thank you for purchasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Package Contents

Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
AAA Batteries x 2
User Manual (this document)

Product Overview

The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.

Lexon On/Off 3 Position LCD Alarm Clock LR98-B, black, showing 12:30 PM on its display.

This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.

Setup

1. Battery Installation

Locate the battery compartment cover on the back of the alarm clock.
Remove the cover by sliding or gently prying it open.
Insert two (2) AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
Replace the battery compartment cover securely.

2. Initial Power On

Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.

Operating Instructions

The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.

Setting the Time

Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
Press the "SET" or "TIME" button again to move to the minute setting.
Use the "+" and "-" buttons to adjust the minutes.
Press "SET" or "TIME" one last time to confirm and exit time setting mode.

Setting the Alarm

Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
Press and hold the "ALARM" button until the alarm hour digits begin to flash.
Use the "+" and "-" buttons to adjust the alarm hour.
Press the "ALARM" button again to move to the alarm minute setting.
Use the "+" and "-" buttons to adjust the alarm minutes.
Press "ALARM" one last time to confirm and exit alarm setting mode.

Using the On/Off Function

The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:

Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.

To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.

EL Backlight

To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.

Hourly Time Signal (Chime)

The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.

Maintenance

Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
Battery Replacement: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.
Environment: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or strong magnetic fields.

Troubleshooting

Problem	Possible Cause	Solution
Display is blank or dim.	Low or dead batteries; incorrect battery installation.	Replace batteries with new AAA batteries; ensure correct polarity.
Alarm does not sound.	Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable).	Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable.
Time is incorrect.	Time was not set correctly; power interruption (if not battery-backed).	Reset the time according to the "Setting the Time" instructions.

Specifications

Model: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
Brand: Lexon
Display Type: Digital LCD
Power Source: 2 x AAA Batteries
Material: ABS (Acrylonitrile Butadiene Styrene)
Dimensions (W x D x H): 5.3 x 1.4 x 3.1 inches (13.5 x 3.5 x 8 cm)
Weight: 0.13 kg (4.6 ounces)
Special Features: On/Off 3 Position Function, EL Backlight, Hourly Time Signal
Mounting Type: Tabletop
Country of Origin: China

Warranty and Support

Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon website. Please retain your proof of purchase for any warranty claims.

For further assistance, you may contact Lexon customer support through their official channels.

	Lexon Flip+ Travel LR151 Digital Alarm Clock User Guide User guide for the Lexon Flip+ Travel LR151 digital alarm clock, featuring time setting, alarm functions, snooze, backlight, travel lock, and technical specifications. This compact travel clock offers a reversible design with ON/OFF faces and a touch-sensitive light.
	Lexon MINUT Mini Compact Alarm Clock User Manual and Quick Start Guide User manual and quick start guide for the Lexon MINUT Mini Compact Alarm Clock (Model LR154-MINUT). Features VA LCD display, touch control, snooze, backlight, rechargeable battery, and aluminium finish.
	Lexon Flip Classic Mint LR157 - Digital Alarm Clock User Manual Comprehensive user guide for the Lexon Flip Classic Mint LR157 digital alarm clock, covering setup, operation, features, specifications, and safety information.
	Lexon Flip Premium LR152: User Manual and Features Comprehensive user guide for the Lexon Flip Premium LR152 digital alarm clock, covering setup, features, alarm settings, and safety information.
	Lexon Ray Clock LR155: User Manual & Features Comprehensive user manual for the Lexon Ray Clock LR155, detailing setup, operations, features like alarm, backlight, night mode, and technical specifications. Includes safety information and disposal guidelines.
	Lexon Flip Premium LR152 Alarm Clock User Manual User manual for the Lexon Flip Premium LR152 alarm clock, detailing features, setup, charging, alarm settings, safety information, and product specifications.

Lexon LR98-B