Important Safety Instructions
Please read these instructions carefully before using the Clatronic FMI 3138 Infrared Foot Massager. Keep this manual for future reference.
- Always disconnect the appliance from the power supply before cleaning or if a fault occurs.
- Do not use the appliance if the power cord or plug is damaged. Contact qualified personnel for repairs.
- This appliance is intended for household use only. Do not use it outdoors or for commercial purposes.
- Do not immerse the appliance in water or other liquids.
- Keep the appliance away from heat sources, direct sunlight, humidity, and sharp edges.
- Do not use the appliance on swollen, inflamed, or injured skin areas. Consult a doctor if you have any concerns.
- Individuals with pacemakers, diabetes, or circulatory problems should consult a doctor before use.
- Children should be supervised to ensure they do not play with the appliance.
Product Overview
The Clatronic FMI 3138 is an infrared foot massager designed to provide relaxation and comfort. It features various functions including bubble massage, vibration massage, and infrared heat.
Figure 1: Top view of the Clatronic FMI 3138 Infrared Foot Massager with the protective lid open, revealing the internal massage rollers and nodes. The central control panel is visible.
Components:
- Massage rollers (removable)
- Massage nodes
- Infrared light/heating element
- Bubble jets
- Control knob
- Splash guard/Lid
- Power cord
Setup
- Placement: Place the foot massager on a flat, stable, and non-slip surface. Ensure there is enough space around the unit.
- Fill with Water: Fill the foot massager with warm or cold water up to the indicated maximum fill line. Do not overfill.
- Connect Power: Plug the power cord into a suitable electrical outlet (230V~, 50Hz).
- Optional Rollers: If desired, place the removable massage rollers into their designated slots.
Figure 2: The Clatronic FMI 3138 Infrared Foot Massager filled with water, demonstrating the bubble function in operation.
Operating Instructions
The Clatronic FMI 3138 offers multiple massage functions controlled by a central knob.
Function Settings:
- Position 0 (OFF): The appliance is switched off.
- Position 1 (Massage): Activates vibration massage only.
- Position 2 (Heat + Bubbles): Activates infrared heat and bubble massage.
- Position 3 (Heat + Bubbles + Massage): Activates infrared heat, bubble massage, and vibration massage simultaneously.
Usage:
- After setup, sit comfortably and place your feet into the foot massager.
- Turn the control knob to your desired function (1, 2, or 3).
- For enhanced massage, gently move your feet back and forth over the massage rollers and nodes.
- The recommended usage time is approximately 15-20 minutes per session.
- To switch off the appliance, turn the control knob to Position 0.
- After use, unplug the appliance from the power outlet.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your foot massager.
- Empty Water: After each use, unplug the appliance and carefully pour out the water.
- Clean Interior: Wipe the interior of the foot massager with a soft, damp cloth. You may use a mild detergent if necessary.
- Rinse: Rinse thoroughly with clean water to remove any soap residue.
- Dry: Dry all parts completely before storing. Do not use abrasive cleaning agents or harsh chemicals.
- Exterior: Wipe the exterior with a dry or slightly damp cloth.
- Storage: Store the appliance in a cool, dry place, away from direct sunlight and out of reach of children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in; power outlet faulty; control knob not set. | Ensure plug is securely inserted. Test outlet with another device. Turn control knob to a function setting (1, 2, or 3). |
| Weak or no bubbles. | Water level too low/high; bubble jets clogged. | Adjust water level to the indicated line. Clean bubble jets if obstructed. |
| No heat. | Control knob not set to a heat function (2 or 3). | Ensure the control knob is set to Position 2 or 3. Note that the heating function is designed to maintain water temperature, not rapidly heat cold water. |
| Unusual noise or smell. | Internal fault. | Immediately unplug the appliance and discontinue use. Contact customer support. |
Specifications
- Model: FMI 3138
- Brand: Clatronic
- Power Source: Electric Cord
- Package Dimensions: 41.6 x 36.8 x 19.8 cm
- Package Weight: 2.56 kg
- Manufacturer: Clatronic International GmbH
- GTIN: 04006160713787
Note: Specifications are subject to change without prior notice for product improvement.
Warranty and Support
Clatronic products are manufactured with care and undergo strict quality controls. In the unlikely event of a defect, please refer to your purchase receipt for warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact your retailer or the official Clatronic customer service in your region. Contact information can typically be found on the manufacturer's website or in the packaging materials.
Please have your model number (FMI 3138) and proof of purchase ready when contacting support.
