Dynex DX-VS201A S-Video Audio/Video Selector User Manual

Introduction

Product Overview

The Dynex DX-VS201 S-Video Audio/Video Selector is designed to expand the connectivity of your television or home theater receiver. This unit allows you to connect up to four audio/video components to a single input on your display device. It features 4 inputs (2 with S-Video capability) and 2 outputs (also with S-Video capability), along with standard composite video and stereo audio (RCA) connections. The front panel input design and one-touch push-button switching ensure ease of use for selecting your desired source.

This selector is particularly useful for systems with limited S-Video or composite video inputs, enabling connection of multiple devices such as satellite receivers, DVD players, VCRs, and video game systems.

Key Features

• Connects up to four audio/video components.
• Supports standard RCA (composite video and stereo audio) and S-Video connections.
• Compatible with a wide range of devices including TVs, digital video recorders, DVD players, and camcorders.
• Passive design requires no external power or batteries.
• Sleek and compact design for easy integration into any entertainment setup.

Product Visuals

Image: Front view of the Dynex DX-VS201A S-Video Audio/Video Selector, showing input/output ports and selection buttons.

Setup

Package Contents

• Dynex DX-VS201A S-Video Audio/Video Selector Unit
• User Manual

Connecting Your Devices

1. Identify Inputs and Outputs: Locate the input ports (labeled INPUT 1-4) and output ports (labeled OUTPUT) on the selector unit. Note that inputs 1 and 2 support both S-Video and composite video, while inputs 3 and 4 support composite video only. All inputs support stereo audio (red/white RCA).
2. Connect Source Devices: Using appropriate S-Video or RCA cables, connect your source devices (e.g., DVD player, VCR, game console, satellite receiver) to the desired INPUT ports on the DX-VS201A selector. Ensure that audio (red for right, white for left) and video (yellow for composite, S-Video for S-Video) cables are connected to their corresponding jacks.
3. Connect to Display/Receiver: Connect the OUTPUT ports of the DX-VS201A selector to a single available input on your television or home theater receiver. If your display has an S-Video input, use an S-Video cable for the best picture quality. Otherwise, use a composite video (yellow RCA) cable. Connect the stereo audio (red/white RCA) cables from the selector's output to your display or receiver's audio input.
4. Power On: Ensure all devices are properly connected and then power on your source devices and display.

Operating Instructions

Selecting an Input Source

To switch between your connected audio/video components, simply press the corresponding input button (labeled 1, 2, 3, or 4) on the front panel of the Dynex DX-VS201A selector. The selector will instantly switch the audio and video signal from the chosen input to your television or receiver.

• Press button 1 to select the device connected to Input 1.
• Press button 2 to select the device connected to Input 2.
• Press button 3 to select the device connected to Input 3.
• Press button 4 to select the device connected to Input 4.

Ensure your television or receiver is set to the correct input channel where the DX-VS201A selector is connected.

Maintenance

Cleaning

To clean the exterior of the selector, use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as they may damage the finish or internal components. Ensure the unit is disconnected from all devices before cleaning.

Storage

When not in use for extended periods, store the selector in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect all cables to prevent strain on the ports.

Troubleshooting

No Video or Audio Output

• Check Cable Connections: Ensure all S-Video, composite video, and audio RCA cables are securely connected to the correct input and output ports on both the selector and your devices.
• Verify Input Selection: Confirm that the correct input button (1, 2, 3, or 4) is pressed on the DX-VS201A selector for the device you wish to view/hear.
• TV/Receiver Input: Make sure your television or home theater receiver is set to the correct input channel where the DX-VS201A selector is connected.
• Source Device Power: Ensure your source device (DVD player, VCR, etc.) is powered on and playing content.

Poor Picture or Sound Quality

• Cable Quality: Use high-quality S-Video and RCA cables. Damaged or low-quality cables can degrade signal quality.
• Cable Length: Avoid excessively long cables, which can lead to signal loss.
• Interference: Keep the selector and cables away from other electronic devices that might cause interference.
• S-Video vs. Composite: For the best picture quality, always use S-Video connections when available on both your source device and display.

Specifications

Warranty and Support

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer. For technical support or further assistance, please visit the Dynex support website or contact their customer service department. Keep your purchase receipt for warranty claims.