Important Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep these instructions for future reference.
- All electrical connections must be in accordance with local codes and ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unfamiliar with installing electrical fixtures.
- Turn off electricity at the main fuse box or circuit breaker before installation.
- Do not install this fixture in wet locations.
- Ensure the fixture is securely mounted to a structural component of the ceiling.
Included Components
Verify that all parts listed below are present before proceeding with installation:
- Mounting Canopy (17 x 17 x 1.5 inches)
- Fixture Body with 16 Light Drops
- Clear Oversized Teardrop Glass Shades (16 pieces)
- Xenon Lamps (16 pieces)
- Mounting Hardware Package
- Instruction Manual (this document)
Image 1: Overview of the ET2 Larmes 16-Light Large Pendant fixture.
Setup and Installation
- Prepare for Installation: Turn off power at the circuit breaker. Clear the work area.
- Mounting Bracket Installation: Secure the mounting bracket to the junction box in the ceiling using the provided screws. Ensure the bracket is firmly attached and can support the fixture's weight.
- Electrical Connections: Connect the fixture's wires to the household electrical wires according to standard wiring practices (black to black, white to white, ground to ground). Use approved wire connectors.
- Canopy Attachment: Carefully lift the fixture canopy and attach it to the mounting bracket, securing it with the provided screws or nuts. Ensure no wires are pinched.
- Adjusting Light Drops: The individual light drops are adjustable. Carefully pull or push the wires through the canopy to achieve the desired height for each teardrop glass shade.
- Install Glass Shades and Lamps: Gently attach each clear oversized teardrop glass shade to its respective light drop. Insert the Xenon lamps into the sockets. Do not overtighten.
Image 2: The ET2 Larmes 16-Light Large Pendant installed in a dining room setting, demonstrating its aesthetic.
Operating Instructions
Once installation is complete and verified, restore power at the circuit breaker. The fixture can be operated using a standard wall switch. The adjustable feature allows for customization of the light drops' length to suit your space.
Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
- Bulb Replacement: Turn off power before replacing lamps. Allow lamps to cool completely. Carefully remove the old Xenon lamp and insert a new one of the same type and wattage (10W Xenon, G9 base).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light | No power to fixture; loose wiring; faulty bulb. | Check circuit breaker; verify wire connections; replace bulb. |
| Flickering lights | Loose bulb; incorrect bulb type; unstable power supply. | Ensure bulbs are tight; use specified Xenon bulbs; consult electrician. |
| Glass shades are loose | Improper attachment. | Gently re-secure shades to light drops. |
If issues persist after attempting these solutions, contact a qualified electrician or customer support.
Specifications
- Model: E20117-18
- Brand: ET2
- Dimensions (Fixture): 19"L x 19"W x 8"H
- Maximum Overall Height (OA): 122 inches (adjustable)
- Light Source: 16 x Xenon Lamps
- Wattage: 10 watts per lamp (160W total)
- Voltage: 120 Volts
- Brightness: 1920 Lumens (total)
- Color Temperature: 2900 Kelvin
- Material: Glass (shades), Polished Chrome (finish)
- Control Method: App (for compatible smart bulbs, not inherent to fixture)
- Certification: ETL Listed
Image 3: Dimensional diagram of the ET2 Larmes 16-Light Large Pendant.
Warranty Information
This ET2 Larmes 16-Light Large Pendant (Model E20117-18) is covered by a 1-year manufacturer's limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, replacement parts, or warranty inquiries, please contact your authorized ET2 reseller or visit the official ET2 website for support contact information. When contacting support, please have your model number (E20117-18) and proof of purchase readily available.
You can find more information about ET2 products and support at the ET2 Store on Amazon.
