Be Cool 98002 16" Chrome Plated, High Torque Fan Module

1. Product Overview

The Be Cool 98002 16" Chrome Plated, High Torque Fan Module is designed to provide powerful and consistent cooling airflow for your vehicle's engine, independent of engine RPM. Unlike traditional engine-driven fans, this electric fan module ensures optimal cooling performance even at low vehicle speeds, such as during parades or heavy traffic, where engine-driven fans typically produce less airflow.

This module is engineered as a puller fan system, meaning it mounts on the engine side (back) of the radiator core and pulls air through the radiator. This configuration is generally preferred when space allows, contributing to significant horsepower gains and improved fuel efficiency by reducing the parasitic drag associated with engine-driven fans.

2. Safety Information

Always prioritize safety when working on your vehicle. Failure to follow these safety guidelines may result in personal injury or damage to the product or vehicle.

• Disconnect Battery: Before beginning any installation or maintenance, always disconnect the vehicle's negative battery terminal to prevent accidental electrical shorts or activation of components.
• Hot Surfaces: Engine components, including the radiator and engine block, can become extremely hot. Allow the engine to cool completely before working on the cooling system.
• Moving Parts: Fan blades can cause severe injury. Ensure the fan module is completely de-energized and stationary before handling or working near it.
• Electrical Hazards: Exercise extreme caution when working with electrical wiring. Ensure all connections are secure and properly insulated to prevent short circuits and fires.
• Eye Protection: Always wear appropriate eye protection to shield against debris, fluids, or sparks.
• Professional Installation: If you are not confident in your mechanical or electrical abilities, it is highly recommended to seek professional installation.

3. Package Contents

Carefully unpack all components and verify that all items are present and undamaged. If any items are missing or damaged, contact your retailer immediately.

Image: Components of the Be Cool 98002 16" Chrome Plated, High Torque Fan Module kit. The image displays a radiator (for context), a dual electric fan assembly with shroud, various mounting brackets, wiring harnesses, and small hardware, illustrating a comprehensive cooling solution.

The Be Cool 98002 Fan Module package typically includes:

• 16" Chrome Plated, High Torque Dual Electric Fan Assembly with Shroud
• Mounting Brackets and Hardware (bolts, nuts, washers)
• Electrical Wiring Harness with Connectors
• Temperature Sensor/Switch (may be integrated or separate)
• Installation Instructions (this manual)

4. Product Specifications

5. Installation Guide

This section provides general guidelines for installing the Be Cool 98002 Fan Module. Specific installation procedures may vary depending on your vehicle's make and model. Always refer to your vehicle's service manual for detailed instructions.

5.1. Preparation

1. Park the vehicle on a level surface and engage the parking brake.
2. Allow the engine to cool completely.
3. Disconnect the negative (-) battery terminal to prevent accidental electrical activation.
4. If replacing an existing fan, carefully remove the old fan assembly and any associated shrouds or components. If necessary, drain a portion of the coolant to prevent spills during radiator access.

5.2. Mounting the Fan Module

• The Be Cool 98002 is a puller fan module, designed to mount on the engine side of the radiator.
• Position the fan module shroud against the radiator core, ensuring proper alignment with the radiator's dimensions.
• Secure the fan module to the radiator using the provided mounting brackets and hardware. Ensure all fasteners are tightened securely, but do not overtighten, which could damage the radiator fins or shroud.
• Verify that the fan blades have adequate clearance from all engine components, hoses, and belts.

5.3. Electrical Connections

• Connect the fan module's wiring harness to the vehicle's electrical system. This typically involves connecting to a fused 12V power source, a ground, and a temperature switch or relay for automatic operation.
• Follow the wiring diagram provided with your specific fan module or consult a professional automotive electrician.
• Ensure all electrical connections are clean, tight, and properly insulated to prevent corrosion and short circuits. Use heat shrink tubing or electrical tape where necessary.
• Route wiring away from hot engine components, moving parts, and sharp edges. Secure wiring with zip ties or clips.

5.4. Post-Installation

1. Reconnect the negative (-) battery terminal.
2. If coolant was drained, refill the cooling system with the appropriate coolant mixture according to your vehicle manufacturer's specifications. Bleed any air from the system as required.
3. Start the engine and allow it to reach operating temperature. Observe the fan operation. The fan should activate when the engine reaches its set temperature and cycle off as the temperature drops.
4. Check for any leaks around the radiator or hose connections.

6. Operating Instructions

The Be Cool 98002 Fan Module operates automatically, controlled by a temperature sensor or switch. Once installed and wired correctly, the fan will engage when the engine coolant reaches a predetermined temperature, drawing air through the radiator to dissipate heat. It will then disengage once the temperature drops to a safe level.

• Automatic Operation: The fan module is designed for hands-free operation, activating only when cooling is required.
• Consistent Airflow: Unlike engine-driven fans, the electric fan provides consistent airflow regardless of engine RPM, ensuring optimal cooling even at idle or low speeds.
• Monitoring: Regularly monitor your vehicle's temperature gauge to ensure the cooling system is functioning correctly.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Be Cool fan module. Perform these checks periodically:

• Cleanliness: Keep the fan shroud and blades free of dirt, debris, and obstructions. A build-up of grime can reduce airflow efficiency. Use a soft brush or compressed air for cleaning.
• Wiring Inspection: Periodically inspect all electrical connections and wiring for signs of wear, fraying, corrosion, or loose connections. Repair or replace any damaged wiring immediately.
• Mounting Security: Check that all mounting bolts and brackets are secure and tight. Vibrations can loosen fasteners over time.
• Fan Blade Condition: Inspect fan blades for any cracks, chips, or damage. Damaged blades can cause imbalance and lead to premature motor failure.

8. Troubleshooting

If you experience issues with your Be Cool fan module, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, contact Be Cool customer support or a qualified automotive technician.

9. Warranty and Support

Be Cool products are manufactured to high standards. For specific warranty terms and conditions, please refer to the warranty information provided at the time of purchase or visit the official Be Cool website. Keep your proof of purchase for warranty claims.

For technical support, installation assistance, or warranty inquiries, please contact Be Cool customer service through their official channels. Contact information can typically be found on the manufacturer's website or product packaging.

Note: This manual provides general guidance. Always consult a qualified professional for complex installations or repairs.