1. Product Overview
The Poulan Pro Replacement Spool is designed for specific Poulan and Poulan Pro string trimmer models, including the PP125. This factory-wound spool provides a convenient and reliable solution for replacing worn or broken trimmer line, eliminating the need for manual winding. It features a .095-inch diameter line and is engineered for use with trimmers utilizing a tap-n-go line advance system and dual-exit head application.
Compatibility: This spool is compatible with Poulan Pro models PP125, P4500, PPB200E, PPB350, and PP025.
Figure 1: Poulan Pro Replacement Spool in its retail packaging. The packaging displays the product name, line diameter (.095"), and compatible models (PPB200E, PPB350, PP025, PP125). The SKU #952-711631 and UPC 024761023931 are also visible.
2. Installation (Setup)
Follow these steps to replace the trimmer line spool in your compatible Poulan Pro string trimmer:
- Safety First: Before beginning, ensure your string trimmer is turned off and disconnected from its power source (unplugged for electric models, spark plug wire disconnected for gas models) to prevent accidental starting.
- Remove Trimmer Head Cap: Locate the trimmer head and carefully remove the cap or cover. This usually involves pressing tabs or unscrewing a retaining nut. Refer to your trimmer's specific manual for detailed instructions on head disassembly.
- Remove Old Spool: Once the cap is off, remove the old, empty, or damaged spool from the trimmer head.
- Insert New Spool: Take the new Poulan Pro Replacement Spool. Align the line exits on the spool with the corresponding holes or slots in the trimmer head. Ensure the line is properly threaded through these exits. The spool should fit snugly into place.
- Replace Trimmer Head Cap: Reattach the trimmer head cap or cover, ensuring it is securely fastened. Tug gently on the line to confirm it is properly seated and ready for use.
3. Operation
The Poulan Pro Replacement Spool is designed to work seamlessly with your trimmer's existing line advance system, typically a tap-n-go mechanism. Once installed, operate your string trimmer as usual. To advance more line, gently tap the trimmer head on the ground while the trimmer is running. The centrifugal force will cause the line to extend, and the cutting blade on the guard will trim it to the correct length.
Important Note: Using the correct diameter line is crucial for optimal trimmer performance. This spool features a .095-inch diameter line, which is suitable for the specified Poulan Pro models.
4. Maintenance
While the spool itself is a consumable item, proper handling and storage can ensure its integrity until use:
- Storage: Store unused spools in a cool, dry place away from direct sunlight and extreme temperatures. This helps preserve the flexibility and strength of the nylon line.
- Inspection: Before installation, inspect the spool for any visible damage or tangles in the line. Ensure the line is wound neatly.
- Disposal: Dispose of empty or broken spools according to local waste disposal guidelines.
5. Troubleshooting
If you encounter issues after installing the replacement spool, consider the following:
- Line Not Advancing:
Cause: Incorrect installation, tangled line, or debris in the trimmer head.
Solution: Turn off and disconnect the trimmer. Remove the head cap and inspect the spool. Ensure it is seated correctly and the line is not tangled. Clear any debris. Reinstall the spool and cap securely.
- Line Breaking Frequently:
Cause: Cutting against hard surfaces (fences, concrete, rocks), incorrect line diameter for application, or worn trimmer head components.
Solution: Avoid contact with hard surfaces. While this spool uses .095-inch line, ensure your trimmer is rated for this diameter. If issues persist, inspect the trimmer head for worn eyelets or cutting blade.
- Spool Not Fitting:
Cause: Incorrect spool model for your trimmer.
Solution: Verify your trimmer model number against the compatible models listed in this manual (PP125, P4500, PPB200E, PPB350, PP025). Ensure you have purchased the correct replacement spool.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Poulan Pro |
| Model Number | PP125 (Spool compatible with PP125, P4500, PPB200E, PPB350, PP025) |
| Part Number (SKU) | 952711631 |
| Line Diameter | .095 inches |
| Line Length | 15 feet (approx. 4.6 meters) |
| Product Dimensions | 11.43 x 5.08 x 12.7 inches (Packaging) |
| Item Weight | 1.58 ounces |
| Country of Origin | United States |
| UPC | 024761023931 |
7. Warranty and Support
For specific warranty information regarding your Poulan Pro Replacement Spool, please refer to the documentation provided with your original string trimmer or contact Poulan Pro customer support directly. As a consumable item, replacement spools typically have limited or no direct warranty coverage, but manufacturer defects may be covered.
For further assistance or inquiries, please visit the official Poulan Pro website or contact their customer service department. You can often find contact information on the product packaging or the brand's official online presence.
