Product Overview
Bona Multi-Surface Floor Polish is designed to protect and renew various hard-surface floors. This protective formula fills in micro-scratches, shields against future wear, and provides a durable high gloss shine. It is suitable for linoleum, stone, terrazzo, vinyl, sealed porous marble, laminate, LVT, and no-wax sealed tile (ceramic, Mexican Saltillo, quarry).
Image: Bona Multi-Surface Floor Polish 32 fl oz bottle.
Key Features
- Protective Formula: Renews floors by filling in micro-scratches and scuffs.
- High Gloss Shine: Adds a durable high gloss finish to dull hard-surface floors.
- Versatile Use: Formulated for linoleum, stone, terrazzo, vinyl, sealed porous marble, laminate, LVT, and no-wax sealed tile.
- GREENGUARD Certified: Product is certified for low chemical emissions into indoor air.
- Coverage: One 32 fl oz bottle covers approximately 500 square feet of flooring.
Image: UL Greenguard certified logo, indicating low chemical emissions.
Important Safety Information
CAUTION: KEEP OUT OF REACH OF CHILDREN.
- May cause upset stomach if swallowed. Drink 1-2 glasses of water to dilute.
- In case of eye contact, flush with water.
- Do not take internally.
- Do not mix with other chemicals.
- This product is not a floor cleaner.
- Do not use if foil seal is broken.
Setup and Preparation
- Remove Old Wax (if applicable): For best results, if unfamiliar with products previously used on the floor, Bona recommends using Bona PowerPlus® Hard-Surface Floor Cleaner and Bona PowerPlus Microfiber Deep Clean Pad to remove any cleaner residue or old wax.
- Clean Floor: Vacuum, sweep, or dust mop the floor to remove loose dirt and debris. Then, thoroughly clean the floor with Bona® Hard-Surface Floor Cleaner and allow it to dry completely.
- Test Product: Perform a test on a small, inconspicuous area of the floor to ensure desired results and compatibility.
Operating Instructions (Application)
- Prepare Polish: Gently rock the polish bottle back and forth for 30 seconds to mix the product.
- Apply Polish: Squirt the product in an "S" pattern onto a small section of the floor.
- Spread Evenly: Use a Bona Mop and a designated Bona Microfiber Cleaning Pad to smooth the polish in one direction. Work in small sections, ensuring the pad remains wet with polish.
- Drying Time: Allow the floor to dry for at least 1 hour before walking on it. For best results, allow 24 hours before heavy traffic or applying additional coats.
- Additional Coats: Depending on floor condition, a second or third coat may be applied for enhanced shine and protection. Ensure the previous coat is thoroughly dry (45-60 minutes) between coats.
- Clean Pad: When finished, thoroughly wash the cleaning pad with warm water.
Image: Achieving a high gloss shine on hard-surface floors.
Image: Polish fills in micro-scratches for a smoother finish.
Maintenance
Bona recommends reapplying the polish every 2 to 4 months, depending on foot traffic and wear, to keep floors revitalized and looking their best. If floors get dirty between polish applications, damp mop with Bona Quick Shine Floor Cleaners.
Image: Polish protects floors against daily wear.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Bona |
| Model Number | WT760051161 |
| Item Form | Liquid |
| Volume | 32 Fluid Ounces |
| Coverage | 500 sq ft (32oz bottle) |
| Scent | Multi-Surface - High Gloss |
| Dimensions | 2.63 x 4.25 x 9.25 inches |
| Item Weight | 2.2 pounds |
| Material Feature | Biodegradable |
| Certifications | GREENGUARD Certified |
Official Product Video
Video: "Bona - For floors that impress" - An official video from BonaKemi USA, Inc. demonstrating the product's benefits.
Additional Information
For more information on ingredients and Bona's commitment to sustainability, visit bona.com.
Scan the QR code on the product label for more details and videos:
Image: Back label with QR code. The QR code links to Bona Hard-Surface Floor Polish product page.
