Introduction
Thank you for choosing the John Timberland Habitat Modern Outdoor Wall Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The John Timberland Habitat Modern Outdoor Wall Light Fixture, featuring a rubbed bronze finish and opal glass shade, installed on an exterior stone wall.
Brand Overview
John Timberland is dedicated to providing quality outdoor lighting solutions. This video offers a brief overview of the brand's commitment to design and functionality.
Official John Timberland Brand Video, showcasing the brand's approach to outdoor lighting design.
Safety Information
For your safety, always read and understand all instructions completely before installing or using this product. Failure to do so could lead to electric shock, fire, or other injuries.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Consult a qualified electrician if you are unsure about the installation process.
- This fixture is rated for Wet Location use, suitable for areas directly exposed to rain and moisture.
- Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not install this fixture in humid environments with saltwater exposure.
Package Contents
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product.
- Wall Light Fixture (Rubbed Bronze)
- Opal Glass Shade
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual
Note: One maximum 60-watt standard base bulb (incandescent, LED, or CFL) with an E26 base is required and not included.
Specifications
| Model Number | 58343 |
| Brand | John Timberland |
| Dimensions (H x W x Extension) | 11 inches high x 7.5 inches wide x 4.5 inches extension from wall |
| Backplate Dimensions (H x W) | 11 inches high x 7.5 inches wide |
| Mounting Point to Top of Fixture | 5.5 inches |
| Weight | 3.43 lbs |
| Finish | Rubbed Bronze |
| Shade Material | Opal Glass |
| Material Type | Alloy Steel |
| Bulb Requirement | 1 x Max 60W Standard Base (E26) Bulb (not included) |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Outdoor (Wet Location Rated) |
| Installation Type | Flush Mount |
Detailed dimensions of the fixture, showing height, width, and extension from the wall.
Setup and Installation
Before you begin, ensure the power is turned off at the circuit breaker. This fixture can be installed horizontally or vertically.
- Prepare the Area: Turn off the main power supply to the junction box at the circuit breaker. Clear the installation area of any obstructions.
- Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is firmly attached and level.
- Wire Connections: Carefully connect the fixture's wires to the corresponding house wires. Connect the black wire (hot) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire (usually bare copper or green). Use the provided wire nuts and ensure all connections are secure.
- Mount the Fixture: Align the fixture's backplate with the mounting plate and secure it with the decorative nuts or screws provided. Ensure there are no gaps between the fixture and the mounting surface to maintain its wet location rating.
- Install Bulb: Insert one maximum 60-watt standard base (E26) bulb into the socket. Do not exceed the recommended wattage.
- Attach Glass Shade: Carefully place the opal glass shade into the fixture and secure it according to the design, ensuring it is snug and sealed.
- Restore Power: Turn the power back on at the circuit breaker and test the light fixture.
Two installed John Timberland Habitat fixtures providing illumination to an outdoor patio, demonstrating their aesthetic and functional placement.
Operating Instructions
The John Timberland Habitat Outdoor Wall Light Fixture operates via a standard wall switch (not included). Once installed and powered, simply use your existing wall switch to turn the light on or off.
- Ensure the correct bulb type (E26 base, max 60W) is installed for optimal performance and safety.
- This fixture is compatible with incandescent, LED, or CFL bulbs.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your light fixture.
- Cleaning: To clean the fixture, first ensure the power is off. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish or glass.
- Bulb Replacement: Before replacing a bulb, turn off the power to the fixture at the circuit breaker. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new E26 base bulb, ensuring it does not exceed 60 watts.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure safe operation.
Troubleshooting
If your light fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | 1. Power is off. 2. Bulb is faulty. 3. Loose wiring connection. | 1. Check the circuit breaker and wall switch. 2. Replace the bulb with a new one. 3. Turn off power, then check and secure all wire connections. If unsure, consult an electrician. |
| Light flickers. | 1. Loose bulb. 2. Loose wiring connection. 3. Incorrect bulb type/wattage. | 1. Turn off power, tighten the bulb. 2. Turn off power, check and secure all wire connections. 3. Ensure the bulb is E26 base and does not exceed 60W. |
If you continue to experience issues after attempting these troubleshooting steps, please contact customer support or a qualified electrician.
Warranty and Support
This John Timberland Habitat Modern Outdoor Wall Light Fixture is backed by a Limited 1-year warranty from the manufacturer, Lamps Plus.
For warranty claims, technical assistance, or any product-related inquiries, please contact Lamps Plus customer support. Keep your proof of purchase for warranty validation.
Manufacturer: Lamps Plus