1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your Air King 9718 18-Inch Industrial Grade Ceiling Mount Fan. This fan is designed for powerful air movement in industrial and commercial spaces such as garages, fitness centers, offices, and schools. It features an 18-inch blade, a 1/6 HP motor, and three speed settings, providing up to 8780 CFM of airflow. The fan head can be pivoted for directional airflow. The unit is constructed with powder-coated steel for durability and includes a ceiling mount bracket and a secondary safety cable.
Figure 1: Front view of the Air King 9718 Industrial Grade Ceiling Mount Fan.
2. Important Safety Instructions
Read all instructions carefully before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Always disconnect the fan from the power source before cleaning, servicing, or moving.
- Ensure the fan is securely mounted to a structural support capable of holding its weight (23.1 lbs).
- Use the provided secondary safety cable as an additional safety measure during installation.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To protect against electrical shock, do not immerse unit, plug or cord in water or spray with liquids.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- This fan is intended for indoor use only.
- Keep fingers and other objects away from the fan blades and moving parts during operation.
- Ensure proper voltage (120 Volts) is supplied to the unit.
3. Package Contents
Verify that all components are present before beginning installation:
- Air King 9718 Industrial Grade Ceiling Mount Fan
- Ceiling Mount Bracket
- Assembly Hardware
- Secondary Safety Cable
- User Manual (this document)
Figure 2: Included components and fan dimensions. Note the secondary safety cable and assembly tools required.
4. Setup and Installation
Proper installation is crucial for the safe and effective operation of your fan. If you are unsure about any part of the installation process, consult a qualified electrician or contractor.
- Choose a Mounting Location: Select a ceiling location that can structurally support the fan's weight (approximately 23.1 lbs) and allows for adequate clearance around the fan blades. Ensure the location is within reach of a 120V AC power outlet, considering the 10-foot, 3-conductor type SJT power cord.
- Mount the Bracket: Securely attach the ceiling mount bracket to a sturdy ceiling joist or structural support using appropriate hardware. Ensure the mounting is firm and stable to prevent vibration or detachment.
- Attach the Fan: Carefully lift the fan and attach it to the mounted bracket according to the assembly instructions provided with the hardware. Ensure all connections are tightened.
- Install Secondary Safety Cable: As an essential safety measure, attach the secondary safety cable from the fan to a separate, independent structural support point on the ceiling. This cable provides backup security in case the primary mounting fails.
- Connect Power: Plug the fan's 10-foot power cord into a grounded 120V AC outlet. Ensure the cord is routed safely to avoid tripping hazards and is not pinched.
Figure 3: Example of the fan mounted on a ceiling, illustrating the power cord connection.
Figure 4: The Air King 9718 fan installed in a commercial warehouse environment.
5. Operating Instructions
The Air King 9718 fan is operated using a pull chain control and features adjustable airflow direction.
- Power On/Off and Speed Control: The fan is equipped with a 3-speed pull chain switch. Pull the chain once for Low speed, a second time for Medium speed, a third time for High speed, and a fourth time to turn the fan Off.
- Adjusting Airflow Direction: The fan head can be manually pivoted up or down, and turned side to side, to direct airflow precisely where needed. Ensure the fan is off before adjusting its position.
Figure 5: Detail of the pull chain for speed and power control.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your fan.
- Cleaning: Disconnect the fan from the power supply before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or immerse the fan in water. The powder-coated steel blade, guard, and mount are designed for easy cleaning.
- Motor: The 1/6-horsepower motor is fully enclosed and permanently lubricated, requiring no additional lubrication.
- Storage: If storing the fan for an extended period, ensure it is clean and dry. Store in a cool, dry place.
Figure 6: The durable powder-coated steel grill and blades are designed for longevity and easy maintenance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply; Power cord not fully plugged in; Pull chain not activated. | Check power outlet; Ensure cord is securely plugged in; Pull chain to cycle through speeds. |
| Reduced airflow | Fan blades or grill are dirty; Fan is on a lower speed setting. | Clean fan blades and grill (ensure fan is unplugged); Adjust speed setting using the pull chain. |
| Excessive noise or vibration | Loose mounting hardware; Fan blades are dirty or unbalanced; Obstruction in fan. | Check and tighten all mounting hardware; Clean blades; Ensure no objects are interfering with fan operation. Refer to noise level chart for expected sound levels. |
Figure 7: Air King 9718 fan sound levels: High 67 dB, Medium 58 dB, Low 49 dB, compared to other sounds.
8. Specifications
| Model Number | 9718 |
| Brand | Air King |
| Fan Blade Diameter | 18 Inches |
| Motor | 1/6 Horsepower, Permanently Lubricated |
| Number of Speeds | 3 |
| Air Flow Capacity | 8780 Cubic Feet Per Minute (CFM) |
| Speed | 1500 RPM |
| Voltage | 120 Volts |
| Wattage | 180 Watts |
| Noise Level (High) | 67 Decibels |
| Product Dimensions (D x W x H) | 10.5"D x 24"W x 28"H |
| Item Weight | 23.1 Pounds |
| Material | Alloy Steel (Powder Coated) |
| Blade Material | Plastic |
| Power Source | AC Corded |
| Mounting Type | Ceiling Mount |
| Cord Length | 10-foot, 3-conductor type SJT |
| Certifications | ETL, OSHA Compliant |
Figure 8: Key electrical specifications and motor details of the fan.
9. Warranty and Support
This Air King 9718 Industrial Grade Ceiling Mount Fan comes with a One Year Limited Warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use.
For warranty claims, technical support, or replacement parts, please contact Air King customer service. Keep your proof of purchase for warranty validation.
Do not attempt to repair the fan yourself, as this may void the warranty and pose safety risks.
